• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.165-170
• /
• 1996

The study was carried out to identify the characteristics of leafy shapes, and to establish the cultural practices such as shading condition, fertilization method, and planting distance of Cirsium nipponicum. Leaf shapes in this plant consist of two kinds, lobation and non-lobation which has two spur type showing large and small spur. Protein band patterns showed that a new protein band in non-lobation with large spur was appeared at the 116.4kDa. For shading condition and fertilization method, number of stems in non-shading and organic matter treatment was higher than that of shading 55% with 3.7. Fresh leaf yield on non-shading and organic matter treatment was higher than that of other treatments. Growth characteristics of leaf number was increased in the $60\times30cm$ treatment, but was redeuced to some extent compared with $60\times45cm$. To increase the fresh leaf yield, the optimum planting distance was $30\times20cm$ with 4,100kg/10a.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.86-92
• /
• 1993

The variation of the esterase isozyme, germination rate, chemical composition and digestibility of field bean(G1ycine soja S. and Z.) were estimated. The results are as follows; 1. The banding patterns of the esterase isozyme in field bean were varied with the tissue and habitat. 2. The enzyme activity of the Est-I, Est-2, Est-3 and Est-4 in field bean showed a high value compared with the other enzyme. 3. The range of germination temperature in field bean was 10-40C and the optimum germination temperature was 25- 38^{\circ}C.$. 4. The crude protein(CP) contents was 19.9% in the whole plant, 27.8% in the leaf and 45.9% in the seed, the cellulose contents was 29.5% in the whole plant, 23.0% in the leaf and 13.8% in the seed, the neutral detergent fiber(NDF) was 62.6% in the whole plant, 47.9% in the leaf and 47.9% in the seed and the acid detergent fiber(ADF) was 44.5% in the whole plant, 28.4% in the leaf and 28.4% in the seed, respectively. 5. The digestibility of the field bean was 44.1% in the whole plant, 49.6% in the leaf and 75.1% in the seed, NDF was 26.2% in the whole plant 46.2% in the leaf, ADF was 29.0% in the whole plant, 47.7% in the leaf and 58.0% in the seed and Cellulose was 48.7% in the whole plant, 58.0% in the leaf and 70.2% in the seed, respectively. 6. Total digestible nutrients(TDN) of the field bean was 47.4% in the whole plant, 51.5% in the leaf and 70.2% in the seed, respectively. The digestible energy(DE) value was 2.1 kcal/g in the whole plant, 2.27 kcal/g in the leaf and 3.10 kcal/g in the seed and the metabolizable energy(ME) value was 1.72 kcal/g in the whole plant, 1.86 kcal/g in the leaf and 3.23 kcal/g in the seed, respectively.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.254-262
• /
• 2019

Background: To exploit the ornamental and medicinal purposes of Lonicera harae Makino, L. subsessilis Rehder, L. praeflorens Batalin, and L. insularis Nakai, native to Korea, it is necessary to understand their seed ecology for propagation. In this study, we investigated the seed dormancy type and germination characteristics of seeds of the four Korean native Lonicera species. Results: The seeds of the four Lonicera species imbibed water readily, suggesting that the species do not have physical dormancy. Furthermore, the seeds exhibited underdeveloped embryos with only about 15-25% of the length of the seeds at dispersal. The embryos grew to the critical length with approximately 50-80% of the length of the seeds' development before radicle protrusion. Further, 94.4% and 61.1% of freshly matured seeds of L. insularis and L. harae germinated within 4 weeks after sowing at 15 ℃ and 20 ℃, respectively. Contrarily, L. praeflorens and L. subsessilis seeds did not germinate within 4 weeks under all temperature treatments. At 15 ℃, L. praeflorens seeds started to germinate from 5 weeks and the final germination rate was 51.1% at 13 weeks. At 15 ℃, L. subsessilis seeds started to germinate from 5 weeks after sowing and the final germination rate was 85.6% at 17 weeks after sowing. Embryo growth and germination of L. praeflorens and L. subsessilis occurred at a relatively high temperature (≥ 15 ℃). Conclusions: Overall, L. insularis seeds have only morphological dormancy. The seeds of L. harae have approximately 60% and 40% of morphological dormancy and morphophysiological dormancy, respectively. Contrarily, L. praeflorens and L. subsessilis exhibited non-deep simple-type morphophysiological dormancy that requires relatively high temperature (≥ 15 ℃) for embryo growth and dormancy breaking. The optimum temperature for the germination of seeds of L. insularis, L. harae, L. praeflorens, and L. subsessilis was 15 ℃, 20 ℃, 15 ℃, and 20 ℃, respectively. There was interspecific variation in seed dormancy and germination patterns in the four Lonicera species. The difference in these characteristics within the four Lonicera species could be useful for understanding the seed ecophysiological mechanisms of Lonicera species.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.144-148
• /
• 2002

The overall objective of this study was to determine which variety of carrot-10 Japan varieties or 6 domestic varieties- produces the optimum quality, when cultivated on Jeju Island. Plant height, leaf number and leaf weight were observed to be more superior in the purebred variety ‘Jungang’than other varieties. further studies, however, skewed the crossing variety ‘Bureoun’was superior to all others. Furthermore, when comparing root diameter, root length and root weight, the ‘Bibary’was superior in both the purebred and crossing variety, When researching Japan varieties, the crossing variety, ‘Jung’showed an increase in underground root. The purebred variety ‘Donghae’also showed an increase in underground root. Marketable yields in domestic varieties were greatest in ‘Hapa’, while in Japan varieties, ‘Kaneko’was the most productive. The percentage of root cracked was 15％ greater in ‘Bureon’. In the purebred variety, Jungang, the percentage was only 10％. The percentage of roots branched was highest in ‘Hidomi’which showed a rate of 9%, The roots branched rate was 2% for ‘Jung’and 6％ for‘Donghae’. Considering the percentage of roots clacked or branched, the marketability of carrots was higher in Japan varieties in comparison with domestic varieties. Therefore we conclude that, in the cropping patterns of carrots, the domestic variety has an advantage over the Japan variety.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.49-53
• /
• 2008

Magnetic and crystallographic properties of patterned media fabricated by nanoimprint lithography and Co-Pt electroplating were studied. Thin films of Ru(20 nm)/Ta(5 nm)/$SiO_2$(100 nm) were deposited on Si(100) wafer and then 25 nm hole pattern was fabricated by nanoimprint lithography on substrate. The electroplated Co-Pt nano-dots have the diameter of 35 nm and the height of 27 nm. Magnetic dot patterns of Co-Pt alloy were created using electroplated Co-Pt alloy and then their properties were measured by MFM, SQUID, SEM, TEM and AFM. We observed single domain with perendicular anisotropy for each dot and achieved optimum coercivity of 2900 Oe. These results mean that patterned media fabricated by nanoimprint lithography and electroplating have good properties in view of extending superparamagnetic limit while satisfying the writability requirements with the present write heads.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2012

Presently, the most promising family of lead-free piezoelectric ceramics is based on $K_{0.5}Na_{0.5}NbO_3$(KNN). Lithium, silver and antimony co-doped KNN ceramics show high piezoelectric properties at room temperature, but often suffer from abnormal grain growth. In the present work, the $(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$ component, which has relaxor ferroelectric characteristics, was doped to suppress the abnormal grain growth. To investigate this effect, Lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3-x(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$[KNLN-AS-xBCTZ] piezoelectric ceramics were synthesized by ball mill and nanosized-milling processes in lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3$ in order to suppress the abnormal grain growth. The nanosized milling process of calcined powders enhanced the sintering density. The phase structure, microstructure, and ferroelectric and piezoelectric properties of the KNLN-AS ceramics were systematically investigated. XRD patterns for the doped and undoped samples showed perovskite phase while tetragonality was increased with increasing BCZT content, which increase was closely related to the decrease of TO-T. Dense and uniform microstructures were observed for all of the doped BCZT ceramics. After the addition of BCTZ, the tetragonal-cubic and orthorhombic-tetragonal phase transitions shifted to lower temperatures compared to those for the pure KNNL-AS. A coexistence of the orthorhombic and tetragonal phases was hence formed in the ceramics with x = 0.02 mol at room temperature, leading to a significant enhancement of the piezoelectric properties. For the composition with x = 0.02 mol, the piezoelectric properties showed optimum values of: $d_{33}$ = 185 pC/N, $k_P$ = 41%, $T_C=325^{\circ}C$, $T_{O-T}=-4^{\circ}C$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.113-123
• /
• 2007

This study analyzed the appropriateness of the spatial distribution of fire stations and emergency medical facilities, the main providers of emergency medical care, in Busan. The area over which the 119 emergency medical services were situated in relation to the dispatch and transport of urgent rescue services was examined. Addresses of patients requiring 119 emergency services were obtained and stored as individual units so that they could be analyzed in a Geographic Information System(GIS). The time taken by emergency services to reach patients and transport them to a hospital or other facility was measured in seconds. By inputting additional information such as the location of the 119 dispatch centers, jurisdictions, and emergency medical facilities, the GIS allowed for analyses not only of the temporal but also the spatial aspects of emergency medical services. The results showed that of 16 Gu/Gun and 226 Eup/Myen/Dong in the Busan area, only 41% of Busan's emergency medical services could respond to and transport patients within five minutes. In all districts, most emergency medical services were provided within five to ten minutes. However, the pattern of hospital use to transfer patients to hospitals was inefficient. Based on the temporal and spatial distributions of fire stations and emergency medical agencies, and on their dispatch and transport times, this study sets out and compares ideal dispatch and transportation patterns for the efficient use of Busan's emergency medical services and resources.