• 한국작물학회지
• /
• 제25권4호
• /
• pp.1-9
• /
• 1980

To determine the optimum harvest time of recent rice varieties from Indica/Japonica remote crosses, leading varieties Suweon 264 and Milyang 23 were tested for the changes in dry matter weight and moisture content of grain, shattering, shelling ratio, milling ratio, and apparant physical quality during grain development at 5 day-intervals from 20 days to 55 days after heading. The results are summarized as follows: 1. Grain weight (dry matter) reached its maximum (physiological maturity) at 30 days after flowering (DAF) in Suweon 264, and at 35 days in Milyang 23, and thereafter it did not change significantly until 55 DAF. 2. Time course of decrease in grain moisture content (Y, %) during maturation (X, DAF) consisted of two linear phases, i.e. a fast and a slow period: Y=68.245-1.33X until 34DAF, and Y=23.025-0.470X until 55DAF after 34DAF in Suweon 264; Y=73.62-1.634X until 24.5DAF, and Y=33.59-0.570X until 55DAF after 24.5DAF in Milyang 23. Two varieties showed the same grain moisture content of 28% (wet basis) at physiological maturity in spite of the distinct differences in the heading date, time of physiological maturity and thereby ripening climate. 3. Force to shatter a grain ranged about 90 to 100g in Milyang 23, and about 200 to 250g in Suweon 264 and in a Japonica variety, Jinheung. The force, however, did not change significantly with harvest time from 35DAF to 50DAF. 4. The changes in the ratios of shelling, milling, broken rice and tinted rice with harvest time were insignificant during a period from 35DAF to 55DAF. However, ratios of green rice and white belly rice decreased significantly with delay in harvest time during 10 days after physiological maturity. 5. The best time of harvest for maximum yield and good quality is thought to be 10 days after physiological maturity, and grain moisture content at this time was about 20% on wet basis.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.185-192
• /
• 2017

This study examined the optimum conditions and obtained the basic data for processing semi-dried sea cucumber flakes. During the boiling process, the weight and length of the sea cucumber decreased to 45.61% and 55.87%, respectively. Thereafter, there was a gradual decrease in the weight and length of the sea cucumber, which were finally maintained at 30.00% and 50.93%, respectively. The moisture content during drying was 38.37% after 3 hours at $60^{\circ}C$, and 36.56% after 5 hours at $30^{\circ}C$. However, the decrease in moisture content was slowly at 60 hours and $4^{\circ}C$, reaching a final value of 68.9%. The length of boiled sea cucumber during drying decreased to 66.35% after 11 hours at $60^{\circ}C$, and 68.90% after 24 hours at $30^{\circ}C$. The chromaticity and hardness tended to increase during the drying process. Moisture content and water activity of sea cucumber flakes decreased from 81.48% (0.963) to 33.50% (0.763), respectively, after 3 hours at $60^{\circ}C$. Following this, the moisture content and water activity continuously decreased to 30.75% (0.608) at 4 hours and 19.47% (0.437) at 5 hours, respectively. The overall acceptance score was 4.11 and 3.89 for 4 hours dry sample and 5 hours dry sample, respectively. However, the score was not statistically significant.

• 한국농공학회지
• /
• 제23권4호
• /
• pp.53-59
• /
• 1981

This experiment was carried out to find out the effectiveness of soil cement stabilization about the Song-I in Cheju province. The results are summarized as follows; 1.The increasing ratio of unconfined compressive strength according to the increment of cement content was markedly low compared with the weathered granite soil, so the effect of stabilization was low. 2.The moisture content of the sample of Song-I indicates the maximum unconfined compressive strength showed at the 5% or so of dry side than the optimum moisture content and the change of the unconfined compressive strength according to the change of moisture content was not sensitive compared with the weathered granite soil. 3.Generally the primary strength of curing age within 7 days of the sulfate resisting cement was low compared with the normal portland cement and the strength of 28 curing days showed a similar tendency, especially in case of Song-I, and it seemed that the sulfate resisting cement was a little more effective than the normal portland cement. 4.As the unconfined compressive strength of grain size controlled Song-I was low compared with the weathered granite soil, so the rate of weight loss by the durability test was great, therefore it was thought that the durability was weak.

• 한국식품저장유통학회지
• /
• 제10권3호
• /
• pp.320-325
• /
• 2003

대부분의 마는 건조분말제품으로 가공되고 있는데, 마를 다양한 가공품으로 개발하기 위한 방법의 하나로 삼투건조라는 전처리를 행하여 건조에 의한 품질손상을 억제하고 단맛으로 기호성을 높인 건조 마 제품을 얻을 수 있는 당절임 공정의 최적화를 시도하여 최적조건을 얻고자 하였다. 침지시간을 3-7시간, 온도는 20-6$0^{\circ}C$, 당농도는 30-70%로 하는 중심합성계획법으로 실험을 설계하여 최적화하였다. 이때의 종속변수로는 침지 후 수분함량, 당도, 색도, 그리고 동결건조후의 수분함량과 재수화율로 하여 분석한 결과 동결건조 후 수분함량에 대해서는 유의성이 없었다. 세 가지의 공정 변수 중 온도의 영향이 가정 적어 온도를 중심으로 고정한 후 침지시간과 당농도의 최적조건을 찾은 결과, 수분함량을 66-70%, 당도를 25-30%, L 75이상, a -2.1--2.4, b를 5이상 그리고 재수화율을 200-250을 제한 조건으로 하는 영역은 5.2-5.9시 간, 56-61%로 나타났다.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.112-119
• /
• 1991

Some experiments were carried out to investigate the effects of freezing and thawing on the strength and strain characteristics of alluvial silty clay under the different temperatures, loading and moisture conditions. The results were as follows; 1. The soil used was proved to be consisted of silty clay with honey-combed structure, and showed higher dilatancy, frost activity and lower stability in natural state. 2. Soil treated with freezing and thawing cycles showed lower compressive strength compared with the non treated, The strength decreased with incement of freezing and thawing cycles. It's shapes of stress-strain curves were flat and did not formulate a peak while the peak strength of higher moisture content soil decreased with the increment of moisture content. It's decrement ratio was most distinctly shown at the first one cycle of freezing and thawing. 3. The cohesion decreased due to freezing and thawing cycles but internal frcition angle was not changed. 4. The liquid limit decreased with increment of freezing and thawing cycles, and became almost constant after three cycles of freezing and thawing. 5. The strength under simple loading at failure mode was appeared to be higher compared with the cyclic loading after freezing and thawing but initial moisture content effect was not observed. 6. Ice lense was not observed within 50% of ice content ratio but observed over 100%. The higher the ice content ratio, the higher the peak strength. As a matter of fact, it seems that an optimum ice content ratio exists for plastic mode and the least compressive strength.

• 환경위생공학
• /
• 제14권2호
• /
• pp.90-95
• /
• 1999

The study on the fermented feeds production of garbages have been conducted to determine the optimum operation condition. The process variables considered for this study were initial air flow rate and temperature control. The results showed that optimum air requirement was $4{\ell}-air/min{\cdot}kg-$ garbages on dry weight basis which is equal to $0.8{\ell}-air/min{\cdot}kg-$ garbages on the basis of 80% moisture content. The optimum initial temperature control in the reactor was $40^{\circ}C$. Crude fiber content of fermented final byproducts were higher than feedstuffs standard for pig breeding and consequently final byproducts had to mix with single-component feed.

• 한국약용작물학회지
• /
• 제4권2호
• /
• pp.163-171
• /
• 1996

Lycoris의 종자발아(種子發芽) 특성(特性)을 구명(究明)하고자 온도(溫度), 채종시기(採種時期)와 파종시기(播種時期), 파종용토(播種用土)과 용토(用土)의 수분량(水分量) 및 광선(光線)의 유무(有無)가 종자발아(種子發芽)에 미치는 영향(影響)을 조사(調査)한 결과(結果)는 다음과 같다. 1. 백양꽃과 개상사화(想思花)는 90% 이상 결실(結實)하였고 종자성숙(種子成熟)은 $9{\sim}10$월 상순(上旬)으로 나타났는데 60% 이상의 발아율(發芽率)을 얻는데는 6개월이 소요되었다. 2. 발아적온(發芽適溫)은 $25^{\circ}C$로 나타났고 변온처리(變溫處理)는 $20,\;25^{\circ}C$에서 효과적(效果的)이었다. 3. 채종적기(採種適期)는 9월(月) 20일(日)경이었고 파종시기(播種時期)는 채종(採種) 즉시 파종(播種)하는 것이 가장 좋았다. 4. 파종용토(播種用土)은 사양토가 가장 좋았고 용토(用土)의 수분량(水分量)은 용토(用土) 400mg당 PF 1. 9가 가장 적당하였다. 4. 종자발아(種子發芽)는 암조건(暗條件)이 명조건(明條件)보다 좋은 것으로 나타났다.

• 한국식품과학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2002

여름무 품종별 무의 절임 특성을 알아보기 위해, 절임 염수(소금 농도: 15%) $(2{\times}2{\times}2\;cm)$로 절단한 3 품종('백봉', '관동', '92343')의 여름 무를 2배의 절임 염수에 넣어 $15^{\circ}C$에서 절이면서 절임 중 깍두기 무의 염도, 중량, 수분함량, 가용성 고형물 함량 및 경도(TPA)를 알아보았다. 3 품종의 깍뚜기 무 모두 절임 시간이 경과 될수록 염도, 가용성 고형물 함량은 증가하였으며, 중량 및 수분함량은 감소하는 경향을 나타내었고, texture analyser에 의한 경도는 감소하는 경향을 나타내었다. 깍두기 무의 소금 농도가 3%에 달할 때까지의 절임 염수의 소금 농도에 따른 최적 절임 시간은 '백봉'은 3시간, '관동' 및 '92343'은 4시간이 적당하였다. 절이는 동안 중량 감소율은 '백봉'이 약간 컸고, '관동' 및 '92343'은 비슷하였다. '관동'과 '92343'은 '백봉'에 비해 수분함량이 적었고, 가용성 고형물 함량이 많았으며 경도가 높았으며 '백봉'은 수분함량이 많고 가용성 고형물 함량이 적었고 경도가 낮았다. 한편, 절임무의 계절별 특성을 알아보고자 '백봉' 및 '백관' 2 품종에 대해 10% 또는 15%의 절임 염수에서 절이는 동안의 깍두기 무중의 염도가 3%에 달하였을때의 절임무 특성을 계절별로 알아본 결과, '백봉'은 염침투 속도, 중량 감소정도, 가용성 고형물 함량 및 경도가, '백광'은 염침투 속도, 중량 감소정도 및 경도가 가을이 봄 및 여름에 비해 높게 나타났으며, 수분 함량은 두 품종 모두 봄 및 여름이 가을에 비해 높게 나타났다.

• 한국버섯학회지
• /
• 제15권4호
• /
• pp.164-167
• /
• 2017

Biological efficiency (BE), the ratio of fresh mushrooms harvested per dry substrate weight, expressed as the percentage of Lentinula edodes, also known as shiitake, was determined using the 'Sanjo 701' strain stored in the Department of Mushroom at the Korea National College of Agriculture and Fisheries. The mycelia were grown in glass columns with varying levels of moisture content and varying mixing periods of 0.5, 1, 2, and 3 hours. The substrate was sterilized using a steam pressure autoclave sterilizer at normal and high pressure to avoid contamination. The results showed that mycelial growth (126 mm/15 days) was optimized at 55% moisture content. The best mycelial growth of 117 mm/15 days was obtained with 2 hours of mixing time. Normal pressure sterilization yielded better results with mycelial growth of 96 mm/15 days at $100^{\circ}C$ compared to 88 mm /15 days with sterilization at $121^{\circ}C$. Mycelial density was higher, i.e. 3(+++), with normal pressure sterilization compared to 2(++) with high pressure sterilization. Furthermore, sawdust mixed with 5% woodchips increased the substrate porosity and yielded higher mycelial growth. Thus, we demonstrated that the optimum harvest or potential increased yield of shiitake can be obtained by modulating moisture content, mixing time, and substrate porosity.