• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.3
• /
• pp.173-181
• /
• 2012

The size and layout of user interface components need to be optimally designed in terms of reachability, visibility, clearance, and compatibility in order for efficient and effective use of products. The present study develops an ergonomic design method which optimizes the size and layout of user interface components using adaptive genetic algorithm. The developed design method determines a near-optimal design which maximizes the aggregated score of 4 ergonomic design criteria (reachability, visibility, clearance, and compatibility). The adaptive genetic algorithm used in the present study finds a near-optimum by automatically adjusting the key parameter (probability of mutation) of traditional genetic algorithm according to the characteristic of current solutions. Since the adaptive mechanism partially helps to overcome the local optimality problem, the probability of finding the near-optimum has been substantially improved. To evaluate the effectiveness of the developed design method, the present study applied it to the user interface design for a portable wireless communication radio.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.2
• /
• pp.109-123
• /
• 1995

Weight of the factors to be considered in layout development with improvement-type heuristics is discussed in this paper. Determination of weight is especially important if it is designed to be used with an improvement-type heuristic. It is same as the value of variable coefficients in a multi-objective function as well as indices for departmental switching orders in the heuristic. Various weights are examined through computer simulation to verify whether the numerical values collected from machinery industries can be used as weights. And then a method to be used for searching an optimum or optimum-tending layout for machinery industries is presented using the weight.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.171-172
• /
• 2013

An operation planning of lift car is crucial in tall building construction especially it's arrangement plans, because it is related with transportation distance of finishing materials affecting construction productivity. Since tall building construction, composed of complicating and huge plane have complex traffic lines of finishing materials, to determine the position of lift car empirically or intuitively has limits. Therefore this paper suggest an optimum layout model of lift car minimizing the transportation distance both at site-level and floor-level using Graph theory and Dijkstra algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.10-16
• /
• 1995

In this study, the optimum design is carried out upon the crankshaft of in-line 6-cylinder internal combustion diesel engine with the mechanical analysis for the layout design, which is standard calculation whose process contains quadratic curve fitting method and quasi newton method about cost function, design variables and constraint conditions, Without finite element analysis, this process in wich mechanical analysis is performed upon the most critical part in crankshaft gives necessary and satisfied output in layout design and saves time and cost in developing a new diesel engine. In this study, also, the 3-dimensional finite element method is used in confirming the standard calculation for the optimization of crankshaft and the shape optimization in crankweb is obtained.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.4
• /
• pp.1-9
• /
• 1997

A study on theergonomic design of the automated ship's bridge and console layout was carried out through this paper. The goal of this study is to find out the effective and ergonomic optimal design solutions of bridge layout hence to reduce the duty officier's workload and increase the safety of navigation. The conventional bridge layouts and modernized Integrated bridge layouts were compared using several factors. To use human factors, an ergonomic control panel layout system based on constraint satisfaction algorithm wa squoted. And the integrated ergonomic bridge layout was converged and applied to the redesign of the navigational console layout.

• Journal of Korean Society for Quality Management
• /
• v.21 no.2
• /
• pp.232-241
• /
• 1993

The objective of this study is to develop an algorithm in the consideration of importance Weight and desirable shape of specific department in the computerized layout planning. Quantitative relationship chart between each department was used. It is decided that the priority among the department as to variable factors and the optimum quantitative relationship chart was obtained using by the Weighting method. The algorithm presented in this study could generate more practical layout for the actual design problem.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.161-168
• /
• 2005

The absorbing material is mostly used to changing the acoustic energy to the heat energy in the passive control, and that consists of the porous media. That controls an air borne noise while the stiffened plates, damping material and additional mass control a structure borne noise. The additional mass can decrease the sound by mass effect and shift of natural frequency, and damping material can decrease the sound by damping effect. The passive acoustic control using these kinds of control materials has an advantage that is possible to control the acoustic in the wide frequency band and the whole space at a price as compared with the active control using the various electronic circuit and actuator. But the space efficiency decreased and the control ability isn't up to the active control. So it is necessary to maximize the control ability in the specific frequency to raise the capacity of passive control minimizing the diminution of space efficiency such an active control. Therefore, the characteristics of control materials and the optimum layout of control materials that attached to the boundary of structure-acoustic coupled cavity were studied using sequential optimization on this study.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.224-228
• /
• 2000

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the detects, the optimum design of the production part, strip process layout, die design, die making and try out etc. re necessary the analysis of effective factors. For example, theory and practice of metal shearing process and its phenomena, die structure, machine tool working for die making, die materials and its heat treatment, metal working in industrial and its know how etc. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. This study regards to the aim of small quantity of production part's press working. Part 1 of this study reveals with production part and strip process layout design.

• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.181-189
• /
• 2013

This paper proposes a two-phase genetic algorithm (GA) to solve the problem of obtaining an optimum configuration of a paired single row assembly line. We pair two single-row assembly lines due to the shared usage of several workstations, thus obtaining an optimum configuration by considering the material flow of the two rows simultaneously. The problem deals with assigning workstations to a sequence and selecting the best arrangement by looking at the length and width for each workstation. This can be considered as an enhancement of the single row facility layout problem (SRFLP), or the so-called paired SRFLP (PSRFLP). The objective of this PSRFLP is to find an optimal configuration that seeks to minimize the distance traveled by the material handler and even the use of the material handler itself if this is possible. Real-world applications of such a problem can be found for apparel, shoe, and other manual assembly lines. This research produces the schematic representation solution using the heuristic approach. The crossover and mutation will be utilized using the schematic representation solution to obtain the neighborhood solutions. The first phase of the GA result is recorded to get the best pair. Based on these best matched pairs, the second-phase GA can commence.