• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.244-251
• /
• 2008

We evaluated the optimum dietary lipid level and feeding rates of extruded pellets (EP) in juvenile flounder Paralichthys olivaceus during the summer season. The first experiment was conducted to determine the optimum dietary lipid level in juvenile flounder. Five isonitrogenous EP (52% crude protein) with increasing dietary lipids (6, 8, 10, 12 and 14%) were fed to satiety to triplicate groups of the juveniles ($18.4{\pm}0.11g$) twice a day for 6 weeks. Weight gain (WG) of fish fed EP with 10% lipid was significantly higher than those of fish fed EP with 6 and 14% lipid (P<0.05). Broken line model analysis suggested that the optimum dietary lipid level could be $9.08{\pm}0.37%$ for the maximum WG in juvenile flounder. The second experiment was conducted to determine the optimum feeding rate using experimental diet contained 10% lipid level that had the highest WG in first experiment. The feed intake of triplicate groups of the juveniles ($13.4{\pm}0.15g$) was restricted to four different feeding rates of 2.0, 2.5, 3.0 and 3.5% of their body weight $day^{-1}$ and to satiation using experimental diets. WG and feed efficiency (FE) of fish was affected by feeding rates. WG and specific growth rate of fish fed the diets increased with increasing feeding rate, however no significant differences (P>0.05) in WG and specific growth rate were observed between the fish fed 3.5% of their body weight $day^{-1}$ and to satiation. FE of fish fed 3.5% of their body weight $day^{-1}$ was significantly higher than those offish fed 2.0% of their body weight $day^{-1}$ and to satiation (P<0.05). Broken line model analysis suggested that the optimum dietary feeding rate could be $3.56{\pm}0.06%$ for the maximum WG in juvenile flounder. These results indicated that the optimum lipid level and feeding rate could be $9{\sim}10%$ (Energy: 4,774kcal and PIE ratio: 108mg protein/kcal in diet) and 3.5% of their body weight $day^{-1}$in juvenile flounder, respectively.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.868-876
• /
• 2014

This study was conducted to estimate the optimum dietary protein to energy (P/E) ratio in juvenile river puffer. Nine experimental diets were formulated with three energy levels and three protein levels at each energy levels. Three energy levels of 3000, 3750 and 4500 kcal diets were included at 45, 50 and 55% crude protein (CP) levels, respectively (45P3000, 45P3750, 45P4500, 50P3000, 50P3750, 50P4500, 55P3000, 55P3750 and 55P4500). Fish averaging $3.43{\pm}0.02$ g randomly were fed the experimental diets in triplicate groups for 8 weeks. Weight gain of fish fed the 50P4500 diet were significantly higher than that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000 and 50P3750 diets (P<0.05), but there was not significantly different from that of fish fed the 50P4500, 55P3750 and 55P4500 diets. Feed efficiency of fish fed the 50P4500 diet were significantly higher than that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000 and 50P3750 diets (P<0.05), but there was not significantly different from that of fish fed the 50P4500, 55P3000, 55P3750 and 55P4500 diets. Protein efficiency ratio of fish fed the 45P3000 and 45P3750 diets was higher than that of fish fed 50P4500 and 55P4500, but there was not significantly different from that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000, 50P3750, 55P3000 and 55P3750 diets. Based on weight gain, feed efficiency and specific growth rate, diets containing energy levels 4500 kcal/kg diet had an optimum P/E ratio of approximately 111 mg protein/kcal (50% crude protein) in juvenile river puffer.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.21-24
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been very important issue. So in this experiment, we calculated error rate of RSFQ switch in superconductiyity ALU, The RSFQ switch should have a very low error rate in the optimal bias. We prepared two circuits Placed in parallel. One was a 10 Josephson transmission lines (JTLs) connected in series, and the other was the same circuit but with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to the both circuits. The outputs of the two circuits were compared with an RSFQ XOR to measure the error rate of the RSFQ switch. By using a computerized bit error rate test setup, we measured the bit error rate of 2.18$\times$$10^{12}$ when the bias to the RSFQ switch was 0.398mh that was quite off from the optimum bias of 0.6mA.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.36-40
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been a very important issue. In this work, we calculated the bit error rate of an RSFQ switch used in superconductive arithmetic logic unit (ALU). RSFQ switch should have a very low error rate in the optimal bias. Theoretical estimates of the RSFQ error rate are on the order of $10^{-50}$ per bit operation. In this experiment, we prepared two identical circuits placed in parallel. Each circuit was composed of 10 Josephson transmission lines (JTLs) connected in series with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to both circuits. The outputs of the two circuits were compared with an RSFQ exclusive OR (XOR) to measure the bit error rate of the RSFQ switch. By using a computerized bit-error-rate test setup, we measured the bit error rate of $2.18{\times}10^{-12}$ when the bias to the RSFQ switch was 0.398 mA that was quite off from the optimum bias of 0.6 mA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.577-583
• /
• 2012

This study was carried out to investigate the supplemental effects of dietary garlic extract (GE) on growth performance of juvenile sterlet sturgeon (Acipenser ruthenus). The first experiment was designed to determine the optimum levels of garlic extract as growth promoter during 10 weeks. Three groups (two replicates/group) of 240 fish with mean body weight of 85 g were fed with diets containing 0 (control), 0.5 and 1.0% of GE. The highest weight gain (%) and feed efficiency (%) were found in fish groups fed with diet containing 0.5% GE. Subsequently, the supplemental effects of dietary GE was studied on growth of juvenile sterlet sturgeon (Acipenser ruthenus) with an average body weight of 59.6 g. Fish cultured in freshwater were randomly allotted to each of 10 tanks (two groups of five replicates, 20 fish/tank) and fed diets with 0.5% GE or without GE (control), respectively, at the level of 2.0% of fish body weight per day for 5 weeks. Weight gain (51.1%), feed efficiency (79.1%), specific growth rate (1.18%) and protein efficiency ratio (1.50) of fish fed 0.5% GE were significantly (p<0.05) higher than those fish fed the control diet. Significantly higher protein (PRE 20.4%) and lipid retention efficiencies (LRE, 74.5%) were also found in 0.5% GE group (p<0.05). The present results suggested that dietary GE could improve growth and feed utilization of juvenile sterlet sturgeons.

• Fisheries and Aquatic Sciences
• /
• v.24 no.6
• /
• pp.219-227
• /
• 2021

The effects of various feeding ratios on the growth, body composition, and blood chemistry of the juvenile mandarin fish Siniperca scherzeri (initial body weight 9.6 g) were examined in recirculating freshwater system equipped with 21, 300 L tanks at 20 fish per tank. The triplicate groups of seven feeding ratios treatments were prepared: 100% (control), 95%, 90%, 85%, 80%, 75%, and 70% of satiation. The feed amount of control group was determined by supplying with apparent satiation and then the feed amounts of the other six feeding groups were determined based on the feed amount of the control group. Fish were hand-fed with test diet (55.4% crude protein) for 10 weeks. Weight gain (WG) and specific growth rate of fish fed to 100% satiation were not significantly (p > 0.05) different from those of fish fed to ≥ 80% satiation but were significantly higher than those of fish fed to 75% and 70% satiation. Feed efficiency, protein efficiency ratio, and protein retention of 100% satiation were not significantly different from those of 95% and 90% satiation but were significantly (p <0.05) lower than ≤ 85% satiation. Condition factor, hepatosomatic index, and coefficient variation were not significantly (p > 0.05) affected by feeding ratio. Whole body composition and contents of hematocrit, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase, glucose, total protein, and high-density lipoprotein cholesterol in blood serum were not significantly (p > 0.05) affected by the feeding ratio; however, content of total cholesterol tended to decrease as the feeding ratio decreased. Using broken-line analysis of WG, it was suggested that the optimum feeding ratio of juvenile mandarin fish, ranging from 9.0 g to 37.0 g, appeared to be 87.7% of satiation without growth inhibition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.159-166
• /
• 2013

In order to develop the optimum shape of an MQL carbide end-mill suitable for high speed machining of wing ribs which are a detailed part of larger wing structures, using a new material Al-Li alloy, a new MQL carbide end-mill is created that has various quantities of holes, hole sizes, and hole locations. A theoretical machining graph is generated using the hammer test and FRF simulation, and a machining test is performed in order to verify the machining stability in the high speed machining area. The optimum configuration of the MQL carbide end-mill is also presented through comparing the chattering, machining noise and cutting conditions, including the maximum cutting depth, rpm, and feed rate per teeth, for each cutter.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.68-69
• /
• 2003

The present study was conducted to investigate the effects of dietary supplementation of $\beta$-1,3 glucan and feed stimulants(BAISM) as a feed additive for juvenile olive flounder (Paralichthys olivaceus). Eight experimental diets supplemented with $\beta$-1,3 glucan and feed stimulants at 0%, $\beta$-1,3 glucan 0.05% ＋ Baism 0.45%, $\beta$-1,3 glucan 0.05% ＋ Baism 0.95%, $\beta$-1,3 glucan 0.10% ＋ Baism 0.90%, $\beta$-1,3 glucan 0.10% ＋ Baism 1.90%, $\beta$-1,3 glucan 0.15% ＋ Baism 1.35%, $\beta$-1,3 glucan 0.15% ＋ Baism 2.85% and $\beta$-1,3 glucan 0.30% ＋ Baism 2.70% of diets as a dry-matter(DM) basis were prepared. Three replicate groups of fish averaging 9.2 $\pm$ 0.1g (Mean $\pm$ SD) were randomly distributed in each aquarium as a group of 15 fish and fed one of eight experimental diets for seven weeks. After the feeding trial, $\beta$-1,3 glucan 0.10% ＋ Baism 0.90%, $\beta$-1,3 glucan 0.10% ＋ Baism 1.90% diets had a higher weight gain (WG), feed efficiency(FE), specific growth rate(SGR) and protein efficiency ratio(PER) than did fish fed 0%, $\beta$-1,3 glucan 0.05% ＋ Baism 0.45%, $\beta$-1,3 glucan 0.05% ＋ Baism 0.95%, $\beta$-1,3 glucan 0.15% ＋ Baism 2.85% and $\beta$-1,3 glucan 0.30% ＋ Baism 2.70% (P<0.05). however, there was no significant difference among fish fed $\beta$-1,3 glucan 0.05% ＋ Baism 0.45%, $\beta$-1,3 glucan 0.05% ＋ Baism 0.95%, $\beta$-1,3 glucan 0.15% ＋ Baism 2.85% and $\beta$-1,3 glucan 0.30% ＋ Baism 2.70%(P>0.05). and $\beta$-1,3 glucan 0.10% ＋ Baism 0.90% diets had a higher peak value of CL(Chemiluminescence) and lysozyme activity, than did fish fed the other diets (P<0.05). These results indicated that dietary sipplementation of $\beta$-1, 3 glucan and Baism affected growth, feed efficiency, specific growth rate, protein efficiency ratio, Peak value of CL and Lysozyme activity, and the optimum dietary supplementation level of $\beta$-1, 3 glucan and Baism as a feed additive could be approximately $\beta$-1, 3 glucan 0.10% ＋ Baism 0.90% of diet in juvenile olive flounder (Paralichthys olivaceus).

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2005

A feeding trial of two feeding rate (satiation and $80\%$ satiation) $\times$ four feeding frequency (three meals a day, two meals a day, one meal a day and one meal every two days) factorial design with three replications was carried out to investigate the optimum feeding frequency and rate for growth of flounder during the winter season. Juvenile flounder averaging 45 g were fed a extruded pellet for 60 days. Weight gain was affected by both feeding frequency (P<0.001) and feeding rate (P<0.01). The best weight gain obtained from fish fed two meals a day with satiation was not different from that of fish fed three meals a day with satiation and $80\%$ satiation. Feed efficiency and protein efficiency ratio of fish fed the diet three times daily were the highest among groups, but not different to other groups of fish except for one meal every two days with satiation and $80\%$ satiation feeding. Daily feed intake was affected by both feeding frequency and feeding rate (P<0.001), these values of fish fed two and three meals a day with satiation were the highest among the groups. Moisture, crude protein, crude lipid and ash contents of fish were not affected by both feeding frequency and feeding rate (P>0.05). The results of this study indicate that the optimum feeding frequency for the growth of juvenile flounder grown from 45 g to 53 g is two meals a day with satiation feeding during the winter season.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.