1 |
K. J. Lee, M. A. Donmez, M. Y. Yang, H. K. Jang"Study on Improvement of Accuracy for Evaluation of Chatter Stability in High-Seep Machining," Proc. of KSPE Spring Conference, pp. 99-100, 2009.
과학기술학회마을
|
2 |
M. Rahman, A. Senthil Kumar, M.U. Salam, "Experimental evaluation on the effect of minimal quantities of lubricant in milling," International Journal of Machine Tools & Manufacture, Vol. 42, pp. 539-547, 2002.
DOI
ScienceOn
|
3 |
J. H. Lee, T. J. Ko, D. G. Baek, "A Study on Machinability and Cost Evaluation of MQL Milling Process," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 2, pp. 26-34, 2009.
과학기술학회마을
|
4 |
Y. K. Hwang, W. J. Chung, J. Y. Jung, C.M. Lee, " A Study on the Improvement of Cutting Force and Surface Roughness in MQL Turning," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 4, pp. 83-91, 2006.
과학기술학회마을
|
5 |
S. H. Park, J. Y. Jung, C. M. Lee, "A Study on the Improvement of Surface Roughness and Analysis of Cutting Force in MQL End-milling," Proc. of KSPE Fall Conference, pp. 395-396, 2006.
과학기술학회마을
|
6 |
Anselmo Eduardo Diniz, Ricard Micaroni, "Cutting conditions for finish turing process aiming: the use of dry cutting," International Journal of Machine Tools & Manufacture, Vol. 42, pp. 899-904, 2002.
DOI
ScienceOn
|
7 |
M. Y. Yan, "Optimization of Cutting Tool for High Speed Machining," The Korean Society of Mechanical Engineering, Vol. 12, No. 6, pp. 1290-1295, 1988.
과학기술학회마을
|
8 |
T. L. Schmitz, M. A. Davies, K. Medicus, J. Snyder, "Improving High-speed Machining Material Removal Rates by Rapid Dynamic Analysis," Annals CIRP, Vol. 50, Issue. 1, pp. 263-268, 2001.
DOI
ScienceOn
|