• Journal of Information Display
• /
• v.9 no.1
• /
• pp.6-13
• /
• 2008

Mobile phones use the embedded memory in LDI (LCD Driver IC). In memory accessing mode, data overlapping phenomenon can occur. These days, various contents such as DMB, Camera, Game are merged to phone. Accordingly, with more data transmission, there would be more data overlapping phenomenon in memory accessing mode. Human eyes perceive this data overlapping phenomenon as simply horizontal line noise. The cause of the data overlapping phenomenon was analysed in this paper. The data overlapping phenomenon can be changed by the speed of data transmission between the host and LDI. The optimum memory accessing position can be defined. This paper proposes a new algorithm for avoiding data overlapping.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.181-186
• /
• 2004

Recently, there has been intensive focus on Turbo Product Codes(TPCs) which have low decoding complexity and achieve near-optimum performances at high code-rate. This paper present a parallel algorithm of turbo product codes enable simultaneous decoding of row and column. The row and column decoders operate in parallel and update each other after row and column has been decoded. simulation results show that the performance of proposed parallel turbo code is almost the same as that conventional scheme for several turbo product codes.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.941-944
• /
• 1988

To assure a successful completion of an assigned task without interruption, the hand of mechnical manipulator often travels along a preplanned path. This paper presents a method of obtaining a time sechdule of velocities and acceleration along the path, under the constraints. Because of the involvement of a linear performance index and a largr number of nonlinear constraints, the "method of approximate programming (AMP)" is applied. To overcome the false solutions AMP is modified. To reduce the computing time, a "direct approximate programming algorithm (DAPA)" is developed.

• 전기의세계
• /
• v.31 no.5
• /
• pp.375-382
• /
• 1982

The optimum control of voltage and reactive power in large system requires large amounts of complicated calculation. If the large power system is controlled by the centralized control scheme, the necessary computing time, memory requirments and data transmission channels increase exponetially, and computer control of the system becomes difficult. Piecewise method which aims at the reduction of the difficulties of centralized control scheme is to decompose a large power system into several subsystems, each of which is controlled by a local computer and the control efforts of each subsystem are coordinated by a central computer. Unless sufficient coordination is made between subsystems, the control quality may become very poor. This paper describes how piecewise method can be applied in the optimal control of voltage and reactive power in large system, and presents effective calaulating algorithm for the solution of the problem. The numerical example for model system is presented here.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.59-64
• /
• 2002

In this paper, 10$\mu$ m-elevated MEMS CPWs on various substrates are presented. Effective dielectric constants of elevated CPW(ECPW) on polyimide-loaded silicon or alumina substrate are examined and characteristic impedances are also computed versus elevation height. Dispersive property of ECPW and its electromagnetic field distributions are studied through 3-D FDTD algorithm for optimum design. Attenuation of ECPW is measured with TRL calibration procedure and revealed about 3.2 43 lower than that of conventional CPW on the same low-resistivity silicon at 40 CHz. ECPW on polyimide-loaded silicon with overlapped configuration reveals 0.2 dB/mm. Especially, alumina substrate imposes better attenuation than silicon.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.837-838
• /
• 2006

In this paper, a novel permanent magnet array is proposed and the magnetic field distribution is evaluated analytically by using magnetic scalar potential. The characteristics of the synchronous permanent magnet planar motor with this novel magnet array such as inductance, back-EMF, and force are calculated by analytical method. The superiority and feasibility of the novel magnet array are verified by comparing with Asakawa array, Chitayat array, and experiment data. Otherwise, the force is developed form 27.77[N] to 30.37[N] by using the method of genetic algorithm.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1133-1136
• /
• 1997

This study established AC-DC system model including DC Link, and then BC Link equation was derived from the model. The equation was included into the calculational algorithm of AC system and solved using fast decoupled method. To minimize the line loss of AC-DC system, optimum theory was applied to the equations.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.390-393
• /
• 1997

Fuzzy logic and neural networks are complemetary technologies in the design of intelligent system. Fuzzy neural network(FNN) as an auto-tuning method is actually known to an excellent method for the adjustment of the fuzzy rule. However, this has a weak point, because the convergence to the optimum depends on the initial condition. In this paper we develop a coding format to determine a FNN model by chromosome in GA and present systematic approach to identify the parameters and structure of FNN. The proposed hybrid tuning method realizes to construct minimal and optimal structure of the fuzzy mode simultaneously and automatically. This paper shows effectiveness of the tuning system by simulations compared with conventional methods.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.98-100
• /
• 2004

This paper is proposed vibration minimize method of PMLSM which is designed to minimize detent force. To minimize of vibration at acceleration discontinuous point of velocity curve, genetic algorithm is applied. The vibration characteristic is compared general trapezoid velocity curve with proposed velocity profile.

• Advances in Computational Design
• /
• v.1 no.2
• /
• pp.175-194
• /
• 2016

Nature has provided inspiration for most of the man-made technologies. Scientists believe that dolphins are the second to humans in smartness and intelligence. Echolocation is the biological sonar used by dolphins for navigation and hunting in various environments. This ability of dolphins is mimicked in this paper to develop a new optimization method. Dolphin Echolocation Optimization (DEO) is an optimization method based on dolphin's approach for hunting food and exploration of environment. DEO has already been developed for discrete optimization search space and here it is extended to continuous search space. DEO has simple rules and is adjustable for predetermined computational cost. DEO provides the optimum results and leads to alternative optimality curves suitable for the problem. This algorithm has a few parameters and it is applicable to a wide range of problems like other metaheuristic algorithms. In the present work, the efficiency of this approach is demonstrated using standard benchmark problems.