• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.472-478
• /
• 2017

본 논문에서는 네트워크 토폴로지 설계방법들(minimum spanning tree와 Dijkstra algorithm)을 사용하여 교통 격자 가로망을 최적화 하는 방안을 다루며, 최소신장트리(minimum spanning tree)에서 직진 교통신호등간의 연동들을 통해 출발지와 목적지간의 지연시간을 최소화 하는 것으로 교통격자 가로망을 최적화한다. 또한 컴퓨터 네트워크에서 사용되어지는 Dijkstra algorithm을 통해 구해진 경로에 따라 차량 운전자들이 그 경로를 준수한다고 가정한다면 격자망에서 교통신호등의 연동을 통해 최적화할 수 있음을 보여준다. 격자 가로망에서의 모의실험결과는 직진 교통신호등의 연동을 통해 망을 가로지는 지연시간을 최소화함을 보여준다.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.292-297
• /
• 2013

Nowadays, a strategy of the self-optimizing machining process is an imperative approach to improve the product quality and increase productivity of manufacturing systems. This paper presents a concept of self-optimizing forming system that allows the forming system automatically to adjust the forming parameters online for guarantee the product quality and avoiding the machine stop. An intelligent monitoring system that has the functions of observation, evaluation and diagnostic is developed to evaluate the pully quality during forming process. Any abnormal variation of forming machining parameters could be detected and adjusted by an intelligent control system aiming to maintain the machining stability and the desired product quality. This approach is being practiced on the pully forming machine for evaluating the efficiency of the proposed strategy.

• 한국강구조학회 논문집
• /
• 제21권2호
• /
• pp.193-201
• /
• 2009

철골 Pre-Engineered Building System(PEBS)이 국내에서도 80년도 후반부터 상당히 일반화되었지만 변단면 PEBS는 대부분 국외에서 개발된 최적화 프로그램으로 구조설계가 수행되고 있다. 이 연구에서는 3차원 변단면 PEBS의 구조설계를 AISC2005의 허용응력설계법과 KBC 기준에 따라 주어진 여러 제약조건들을 만족하도록 수치해석법으로 최적화하는 프로그램을 개발하였다. 변단면 구조물의 최적화 설계는 구조해석과 최적 부재설계를 수행하는데, 구조물의 최소 중량화를 위해서 구조해석과 부재설계 과정을 허용응력조건과 변위조건이 만족될 때까지 반복 수행한다. 2, 3차원 변단면 구조물을 최적화 설계한 결과에 의하면 변단면 용접 H-형강으로 설계하는 것이 압연 H-형강보다 상당한 철골 절약효과가 있는 것으로 나타났다. 변단면 용접 H-형강으로 설계하는 경우 구조물의 종류에 따라 차이는 있지만 AISC2005 기준으로 설계하는 것이 AISC1989 기준보다 철골량이 줄어들었고, 부재 춤도 작게 설계되어 웨브 좌굴에 새 기준이 더 안전한 것으로 평가되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.76.2-76.2
• /
• 2005

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.226-232
• /
• 2005

Contact material is widely used in the field of electrical parts. Ag-CdO material has a good wear resistance and stable contact resistance. In order to establish optimizing heat treatment condition, rolling temperature and oxidation process, we studied the microstructure of Ag-CdO material with various conditions. The experimental procedure were melting using high frequency induction, heat treatment, rolling and internal oxidation. And we experimented on difference process, Post-oxidaion. In this study, we obtained the optimizing heat treatment condition was $700^{\circ}C$ for 15 min. and the optimizing rolling temperature was $730^{\circ}C$. In investigation of the microstructure of oxidized material, coarse oxide and depleted oxidation layer existed. The hardness was average Hv 70. When we used Post-oxidation, oxides were finer than prior process and depleted oxidation layer did not exist. The hardness of Post-oxidation material was average Hv 80. And the optimizing rolling temperature was $800^{\circ}C$.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.52-59
• /
• 2000

Experimental studies were performed to improve the THC emission characteristics by optimizing the flow in the exhaust manifold and CCC in a SI engine. For this purpose the flow characteristics in the exhaust manifold and CCC were measured by using LDV technique under various engine conditions, Referring to these data a new type exhaust manifold was designed to improve the cold-start emission characteristics and the response characteristics of {{{{ OMICRON _2}}}} sensor by optimizing the flow pattern and reducing the thermal inertia of the exhaust manifold system. It was found through the vehicle emission tests that the emission characteristics of THC of the new type exhaust manifold was improved by 12% through the optimizing the flow pattern in the exhaust manifold.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.105-117
• /
• 2003

The purpose of this research aimed at performing the easy design. and also the easy on-the-job application or the maintenance interval determination methodology by presenting the determining model or the optimizing maintenance interval in TBM for the preventive maintenance or facility TBM(time-based maintenance) as the preventive maintenance requires the adequate determination or the maintenance interval. The maintenance interval or TBM shall be applied differently for the each interval such as He patrol inspection, maintenance, overhaul inspection. exchange. And it is based on the composition level of equipment. The already informed theories or interval determination methodology for the patrol inspection. repair. and overhaul inspection are difficult for adopting because or the several restriction problems in applying the maintenance schemes as the theory So, the model for determining the optimizing exchange interval or part, maintenance interval of auxiliary machine, unit equipment etc. was presented to apply in the maintenance easily and appropriately.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권4호
• /
• pp.283-288
• /
• 2016

Optimizing the number of ad clicks is a large-scale learning problem that is central to the multi-billion-dollar mobile advertising industry. There are currently several optimization methods being used, including ad mediation and ad positioning. Recently, researchers have recommended using ad refresh interval as a new method for optimizing mobile advertising. This paper applies that new method to optimize content duration for mobile ads. The result achieved from this optimization study could further increase revenue for mobile advertisers and publishers. This research has high applicability for the growing mobile advertising industry. It also lays out a solid background for future research in this promising area.

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.1-10
• /
• 2000

One of the primary goals of the simulation experiments is to understand the overall system behavior and to analyze the system, ultimately to optimize the system. Optimizing the system includes determining the optimum condition of the system parameters of interest. This paper is concerned with the simulation methodology for estimating the unknown objective function for the system of interest and optimizing the system with respect to the controllable factors. In the process of estimating the unknown objective function, which is assumed to be a second order spline function, we use common random numbers for different set of the controllable factors resulting in more accurate parameter estimation for the objective function. We will show some mathematical result for the benefit of using common random numbers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.223-225
• /
• 1999

The procedure of optimum design is consist of a system analysis module, an optimum design module and an optimizing method module. In this paper, the method to connect the system analysis module with the optimizing method module using the self script language of OPERA has been provided. Optimum design for a magnet whose central field must be 27 has been carried out with the presented method. OPERA Pre/Post-processor has been used as a system analysis module and mixed decent/gradient method as an optimizing method.