• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1194-1203
• /
• 2004

The RR protocole, proposed in IETF mip6 WG and standardized by RFC 3775 at lune 2004, send a message 'Binding Update' that express MN's location information to CN safety and update location information. Standard RR protocole has some problems with initiating the protocol by the MN; it causes to increases in communication load in the home network, to increases communication delay between MN and CN. Also, is connoting vulnerability to against attacker who are on the path between CN and HA in security aspect. This paper proposes doing to delegate MN's location information update rights by HA new location information update method. That is, When update MN's location information to HA, Using MN's private key signed location information certificate use and this certificate using method that HA uses MN's location information at update to CN be. It decreases the route optimization overhead by reducing the number of messages as well as the using location information update time. Also, remove security weakness about against attacker who are on the path between CN and HA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1330-1336
• /
• 2014

QoS techniques and transmitted in real-time communication with the advancement of technology a variety of applications and services are available these days, mobile devices bogeuphwa LTE technology to the development of multimedia services with high quality can be realized. In order to satisfy this condition simply with a router with an increased bandwidth expansion by considering the increase in the routing table of the network scalability problems included. Burst traffic data to be distributed according to the environment is to be centered. To do this, the destination -based routing method to transmit the current paper -based (Source routing) routing settings are required. In this paper, published by the IETF, IP switching system based on standardized protocol Label Switching Multi-Protocol Label Switching (MPLS) network by using the existing Best Effect is difficult to guarantee QoS for multimedia transmission in MPLS network environment using optimized QoS guarantees to transmit the multicast.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.79-91
• /
• 2012

In the Digital Convergence era, the center of social networking is moving into on-line space. This means also that space for public is moving into the on-line space. Along with this, spaces in commercial area, offered as attraction factors, are taking a role as a public space. So, this paper defines these spaces mentioned above as public space and the like. Liberal and affluent communication of Digital Convergence has caused in new spatial cognitions such like, constant social space, flowing space, temporary space, and multiple space. This means the hybridization of on-line and off-line space and the advent of public convergent space. However, it is on-line-centered convergence and has positive effects and negative effects on relationship. This paper suggests the optimization of public convergent space to solve the problems and make better a public space for relationship. For achieving this, social disclosure is grasped as the common way to start relationship both off-line and on-line, and it is proved that social disclosure has three characters such as self-presentation, corporeality, and subjectivity. Subsequently, the differences of the roles of off-line and on-line space are separated by each individual character. These are self-presentation of performance vs. storytelling, corporeality of embodiment vs. disembodiment, and self-subjectivity vs. inter-subjectivity. By recognizing that there are multilevel spectrums between the formers and the latters, this paper presents the direction of the spatial configuration of public convergent space which offers the right of manipulation of self-disclosure. It will be used for presenting the prototype of public convergent space.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.3
• /
• pp.206-215
• /
• 2005

In this paper, we propose a new design method of Genetic Algorithm Processor(GAP) and Evolvable Hardware(EHW). All sorts of creature evolve its structure or shape in order to adapt itself to environments. Evolutionary Computation based on the process of natural selection not only searches the quasi-optimal solution through the evolution process, but also changes the structure to get best results. On the other hand, Genetic Algorithm(GA) is good fur finding solutions of complex optimization problems. However, it has a major drawback, which is its slow execution speed when is implemented in software of a conventional computer. Parallel processing has been one approach to overcome the speed problem of GA. In a point of view of GA, long bit string length caused the system of GA to spend much time that clear up the problem. Evolvable Hardware refers to the automation of electronic circuit design through artificial evolution, and is currently increased with the interested topic in a research domain and an engineering methodology. The studies of EHW generally use the XC6200 of Xilinx. The structure of XC6200 can configure with gate unit. Each unit has connected up, down, right and left cell. But the products can't use because had sterilized. So this paper uses Vertex-E (XCV2000E). The cell of FPGA is made up of Configuration Logic Block (CLB) and can't reconfigure with gate unit. This paper uses Vertex-E is composed of the component as cell of XC6200 cell in VertexE

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.105-111
• /
• 2003

Wheel for passenger car support the car weight with tires, and they transmit rolling and braking power into the ground. Whittling away at wheel weight is more effective to boost fuel economy than lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model, and ANSYS package is selected for analyzing the design model. It has difficulties to interface these commercial software directly. For Combining both programs, response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim, and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel whee. PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm, which used the second-order information in the direction finding problem and uses the active set strategy, is used for solving optimization problems.

• Coupled systems mechanics
• /
• v.9 no.2
• /
• pp.111-123
• /
• 2020

Wastewater treatment plants (WWTPs) with activated sludge system are widely used throughout the most common technologies in the world. Most treatment plants require optimization of certain treatment processes using dynamic modeling. A lot of examples of dynamic simulations require reliable data base of diurnal variation of the inflow and typical concentrations of parameters such as Chemical Oxygen Demand (COD), Total Kjeldahl Nitrogen (TKN), etc. Such detailed data are not available, which leads to problemsin the application of dynamic simulations. In many examples of plants, continuous flow measurements are only performed after the primary clarifier, whereas measurements from influent to the plant are missing, as is the case with the examples in this paper. In some cases, a simpler, faster and cheaper way can be applied to determine influent variations, such as the "HSG-Sim" method ("Hochschulgruppe Simulation"). "Hochschulgruppe Simulation" is a group of researchers from Germany, Austria, Switzerland, Luxembourg, Netherlands and Poland (see http://www.hsgsim.org). This paper presents a model for generating daily variations of inflow and concentration of municipal wastewater quality parameters, applied to several existing WWTPs in Bosnia and Herzegovina (B&H). The main goal of the applied method is to generate realistic influent data of the existing plants in B&H, in terms of flow and quality, without any prior comprehensive survey and measurements at the site. The examples of plants show the influence of overflow facilities on the dynamics of input flow and quality of wastewater, and a strong influence of the problems of the sewerage systems.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.291-309
• /
• 2020

To study oceanic and meteorological problems related to climate change, Korea has been operating several ocean research stations (ORSs). In 2011, the Gageocho ORS was attacked by Typhoon Muifa, and its structural members and several observation devices were severely damaged. After this event, the Gageocho ORS was rehabilitated with 5 m height to account for 100-yr extreme wave height, and the vibration measurement system was equipped to monitor the structural vibrational characteristics including natural frequencies and modal damping ratios. In this study, a mass reallocation method is presented for structural model updating of the Gageocho ORS based on the experimentally identified natural frequencies. A preliminary finite element (FE) model was constructed based on design drawings, and several of the candidate baseline FE models were manually built, taking into account the different structural conditions such as corroded thickness. Among these candidate baseline FE models, the most reasonable baseline FE model was selected by comparing the differences between the identified and calculated natural frequencies; the most suitable baseline FE model was updated based on the identified modal properties, and by using the pattern search method, which is one of direct search optimization methods. The mass reallocation method is newly proposed as a means to determine the equivalent mass quantities along the height and in a floor. It was found that the natural frequencies calculated based on the updated FE model was very close to the identified natural frequencies. In conclusion, it is expected that these results, which were obtained by updating a baseline FE model, can be useful for establishing the reference database for jacket-type offshore structures, and assessing the structural integrity of the Gageocho ORS.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.3
• /
• pp.245-252
• /
• 2007

The important problems from the point of view of preventing global warming are to save the power consumption of automotive air-conditioning systems and reduce the refrigerant amount filled. To achieve such requirements, integral receiver/dryer (R/D) condensers were developed recently. Typical integral R/D condensers have extra headers that play the role of R/D. Except an extra header and somewhat complex tube array resulting from the extra header, the most integral R/D condensers have almost the same specification that tube has multi channels, fin has louvers, flow in tube is parallel, etc. When integral condensers are applied, it is known that the refrigerating effect increases, resulting from the increase of subcooling degree in condenser, and the refrigerant amount used saves. In spite of several merits, integral condensers have not been applied a lot. That is why there is an uncertainty in performance, using integral condensers. The objective of this study is to theoretically optimize the tube array in an integral R/D condenser that is really being applied to some vehicles. The tube array has a great effect on the performance of the integral condenser as well as common ones. Through computer simulation, we could see that the tube array, 14-6-3-5-3-4, in the same condenser was the best, comparing heat release rate, pressure drop, etc. to the real array, 17-5-3-3-2-5. It should be noted that the optimization is based on the condenser performance only.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.28-39
• /
• 1991

A study on the optimization problems to find forebode shapes with minimum wavemaking and frictional resistance was performed. The afterbody was fixed as a given hull and only forebode offsets were treated as design variables. Design variables were divided into the offsets of given hull and small variation from them. For the wavemaking resistance calculation, Neumann-Kelvin theory was applied to the given hull and thin ship theory was applied to the small variation. ITTC 1957 model-ship correlation line was used for the calculation of frictional resistance. Hull surface was represented mathmatically using shape function. As object function, such as wavemaking and frictional rersistance, was quadratic form of offsets and constraints linear, quadratic programing problem could be constructed. The complementary pivot method was used to find the soulution of the quadratic programing problem. Calculations were perfomed for the Series 60 $C_{B}$=0.6. at Fn=0.289. A realistic hull form could be obtained by using proper constraints. From the results of calculation for the Series 60 $C_{B}$=0.6, it was concluded that present method gave optimal shape of bulbous bow showing a slight improvement in the wave resistance performance at design speed Fn=0.289 compared with the results from the ship theory only.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2007

As the number of public Web Services increases, there will be many services with the same functionality. These services. however, will vary in their QoS properties, such as price, response time and availability, and it is very important to choose a best service while satisfying given QoS constraints. This paper brings parallel branching and response time constraint of business processes into focus and investigates several service selection plans based on multidimensional multiple choice Knapsack model. Specifically. proposed in the paper are a plan with response time constraints for each execution flow, a plan with a single constraint over the whole service types and a plan with a constraint on a particular execution path of a composite Web Services. Experiments are conducted to observe the performance of each plan with varying the number of services, the number of branches and the values of response time constraint. Experimental results show that reducing the number of candidate services using Pareto Dominance is very effective and the plan with a constraint over the whole service types is efficient in time and solution quality for small to medium size problems.