• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• 응용통계연구
• /
• 제27권5호
• /
• pp.773-786
• /
• 2014

본 연구는 ROC 곡선에서 형성되는 면적 형태로 나타나는 분류정확도기준인 오분류율곱(multiplication of false rates; MFR)를 제안한다. MFR 기준과 다른 기준로부터 구한 최적분류점의 분류성과에 대하여 비교 분석한다. 다양한 분포함수에 대하여 최적분류점을 구하고 이에 대응하는 FNR과 FPR을 비교하면서 MFR의 특징과 장점을 유도한다. 일반적인 비용함수를 바탕으로 분류점에 대한 비용비율을 다양한 분류기준을 이용하여 구한다. 비용곡선에 대한 비용비율의 관계를 정리하여 MFR 기준의 장점을 탐색한다. MFR 기준의 정의를 다차원 ROC 분석으로 확장하고 다차원의 다른 분류기준과의 관계를 설명하면서 토론한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.184-191
• /
• 2018

Purpose: The purpose of this study is to propose a method to calculate the optimal preventive maintenance cycle of radar used in the aviation weapon system of ROKAF. Methods: A hybrid model is used to estimate the optimal preventive maintenance cycle in a system that can perform condition based predictive maintenance (CBPM) through continuous diagnosis. The failure data of the radars operating in the military were used to calculate the reliability. Results: According to the research results, the reliability threshold of the radar began to decrease after 5 flights, and decreased rapidly after 12 flights. Since the second check, costs have continued to decline. Conclusion: A method is proposed to determine the cycle of optimal preventive maintenance of radar within operational budget through modeling results between reliability limit and cost for radar. The results can be used to determine the optimal preventive maintenance cycle and frequency of various avionics equipment.

• 한국콘텐츠학회논문지
• /
• 제11권6호
• /
• pp.18-25
• /
• 2011

이미지로부터 중요 객체를 추출하는 것은 추적, 분할, 적응적 압축, 내용기반 검색과 같은 멀티미디어 처리에 있어서 매우 중요한 부분이며, 현재 이에 관한 많은 연구가 진행 되고 있다. 중요 객체 추출을 위한 방법으로 Saliency Map을 이용한 방법이 있다. 이 방법에서는 일반적으로 이진화된 Saliency Map을 이용하여 어떤 화소가 중요 객체 내부인가 아닌가를 표시한다. 따라서 이 방법은 이진화를 위한 임계값의 선택이 성능에 매우 중요한 영향을 끼친다. 기존 연구에서는 일반적으로 휴리스틱 방법을 이용하여 임계값을 결정하거나 매개변수로 임계값을 조정하는 방법이 사용되었다. 그러나 하나의 임계값 적용은 이미지 안의 다수의 객체가 포함되어 있는 경우 적합하지 않다. 본 논문에서는 이러한 단점을 개선할 수 있는 Otsu 임계값을 이용한 전역적인 최적 임계값을 사용하는 방법을 제안한다. 제안하는 Otsu 임계화 방법은 단일-계층에 적용할 수 있는 Otsu 방법과 이를 확장하여 다중-계층에도 적용할 수 있는 Otsu 방법이다. 제안한 방법을 기존의 Saliency Map 모델에 적용한 결과 성능이 개선되었음을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4603-4624
• /
• 2016

In this paper, a new reversible watermarking algorithm with adaptive embedding threshold matrix is proposed. Firstly, to avoid the overflow and underflow, two flexible thresholds, TL and TR, are applied to preprocess the image histogram with least histogram shift cost. Secondly, for achieving an optimal or near optimal tradeoff between the embedding capacity and imperceptibility, the embedding threshold matrix, composed of the embedding thresholds of all blocks, is determined adaptively by the combination between the composite chaos and the average energy of Integer Wavelet Transform (IWT) block. As a non-liner system with good randomness, the composite chaos is suitable to search the optimal embedding thresholds. Meanwhile, the average energy of IWT block is calculated to adjust the block embedding capacity, and more data are embedded into those IWT blocks with larger average energy. The experimental results demonstrate that compared with the state-of-the-art reversible watermarking schemes, the proposed scheme has better performance for the tradeoff between the embedding capacity and imperceptibility.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (3)
• /
• pp.172-174
• /
• 2004

무선 네트워크의 TCP 성능을 제고하기 위한 방법으로 ECN 방법이 심도 있게 연구되었다. 그러나, ECN 마킹을 위한 최적의 threshold에 대한 연구 결과는 찾아 보기 힘들다. 본 논문은 ECN 마킹을 위한 최적의 threshold를 찾는 식을 제시하고, ECN 전략을 적용하는 TCP의 페트리 넷 모형을 구축한 다음, 시뮬레이션을 통하여 제시된 식의 타당성을 검증한다. 또한 제시된 식의 실용화 방안도 제안한다.

• 산업공학
• /
• 제24권4호
• /
• pp.295-303
• /
• 2011

This paper presents a discrete time optimal asset buying problem with a predetermined final deadline where an available budget is limited. A cost is paid to search for assets called the search cost. A seller who shows up offers a price for the asset and then the buyer decides whether or not to buy the asset by comparing the offered price to his optimal selection threshold. When the budget becomes less than the search cost or the price of the asset the buyer can get a necessary loan with some interests. We clarify the properties of the buyer's optimal selection threshold in order to maximize the expected value of budget which is left after paying all the search costs and the price of the asset at that point in time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.862-863
• /
• 2015

This paper presents an improved estimation procedure for the contribution to no-load flux linkage created by the permanent magnet (PM) in interior permanent magnet synchronous machines. In the proposed method, the saturation effect in stator and rotor cores are taken into account by utilizing the frozen permeability method (FPM). This improved procedure can evaluate the contribution for each local element in the PM to the no-load flux linkage. According to the analysis results, an effective PM topology optimal design can be carried out to achieve high utilization ratio of PM in the machine. In order to determine the threshold of the low contribution of PM for removing, one multi-objective optimization model is proposed. Based on the optimal threshold, the final optimal topology design of PM can be achieved.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.131-138
• /
• 2016

In this paper, we propose a simple linear bottleneck assignment problems (LBAP) algorithm to find the optimal solution. Generally, the LBAP has been solved by threshold or augmenting path algorithm. The primary characteristic of proposed algorithm is derived the optimal solution of LBAP from linear sum assignment problem (LSAP). Firstly, we obtains the solution for LSAP from the selected minimum cost of rows and moves the duplicated costs in row to unselected row with minimum increasing cost in direct and indirect paths. Then, we obtain the optimal solution of LBAP according to the maximum cost of LSAP can be move to less cost. For the 29 balanced and 7 unbalanced problem, this algorithm finds optimal solution as simple.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.312-321
• /
• 2007

We address a disposal issue of returned products in a product recovery system where a single product is stocked in order to meet a demand from customers who may return products after usage. Product returns occur randomly and can be accepted for remanufacturing or disposed of depending on the state of the system. We examine the structure of the optimal disposal policy for returned product that utilizes the information of the inventory of both serviceable and remanufacturable products. Numerical study indicates that it can be characterized by a monotonic threshold type of the curve. A disposal is allowed only when the remanufacturable inventory level exceeds a threshold which is the function of the inventory level of serviceable product and it is decreasing as the serviceable inventory level increases. Sensitivity analysis also indicates that the optimal disposal policy and the optimal profit have monotonic properties with respect to system parameters.