• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.129-138
• /
• 2013

산업화의 발달과 더불어, 도로 등 교통시설과 건설 장비의 발달로 공장 제작하여 운반 설치하는 프리캐스트 구조물이 급속히 확장되는 추세이며, 2000년 대 부터는 철근콘크리트 옹벽도 프리캐스트 공법이 개발되고 현장에서 적용이 확대되고 있는 추세이다. 본 연구에서는 기존에 항타하여 설치해 온 앵커 파일 옹벽에서 기초에 설치되는 앵커파일을 일반돌기에서 나선형 플렌지 타입으로 설치하여 유압모터를 이용한 압입, 회전 방식으로 설치하고 앵커파일의 형태를 개선하고 이에 따른 기술적 검증과 최적의 적용형태를 도출하였다. 이를 위하여 현장 실규모 시험 및 수치해석적 검증을 수행하였으며, 인발실험 결과 앵커파일은 나선형 플렌지를 설치하는 것이 돌기가 없거나 다른 형상의 돌기가 설치된 파일에 비해 1.5~8배의 높은 인발 저항력을 보였으며, 나선형 플렌지가 설치된 APC옹벽에서 인발 저항력의 증대로 기초와 벽체의 변위도 25% 이상 감소됨을 보였다.

• 정보처리학회논문지B
• /
• 제10B권5호
• /
• pp.503-508
• /
• 2003

척추에 대한 외과수술은 신경조직을 손상하지 않아야 하기 때문에 수술 절차가 신중하게 계획되고 고도의 정밀을 요구한다. 척추성형술(verte-broplasty)은 골다공증으로 인한 척추의 골절을 치료하기 위해 제안된 비교적 새로운 외과적인 수술방법으로 최소침습적인 수술 기법으로 피부를 통하여 골절된 척추부위에 구멍을 내고 그곳에 PMMA(polymethylmethacrylate)라 불리는 골시멘트(bone cement)를 주입하여 치료하는 방법이다. 최근의 연구결과, 수술 후 즉각적인 고통의 경감을 가져오며, 골다공증으로 인한 골절부위에 강도가 강한 골시멘트를 주입하게 됨으로써 골다공증 척추체에 구조적인 안정성을 제공해 주는 것으로 알려져 있다. 수술 후 발생하는 합병증의 대부분은 과도한 골시멘트의 주입으로 인한 것으로 알려져 있으며, 따라서 척추성형술의 치료에 가장 중요한 요인은 주입한 골시멘트의 양을 조절하는 것이다. 이에 본 연구에서는 환자의 컴퓨터단층촬영(computer tomography)을 통하여 획득한 영상을 토대로 척추성형술 시술시 필요한 의료 영상 시스템을 설계 및 개발하고, 텍스처 분석을 통하여 개개인의 환자에게 필요한 골시멘트의 양을 계산하는 알고리즘을 개발하여 이를 실제 환자의 시술시에 적용해 보았다. 결과적으로 본 시스템은 척추성형술시에 최적의 골시멘트의 양을 예측할 수 있었으며, 정형외과의 다른 부위의 수술시에도 적용가능성을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1171-1176
• /
• 2005

The latest technical development of steel plate girder railway bridge are developing in ways to maximize its durability of materials in use of high strength steel and efficiency of maintenance and management by the introduction of simplified and standardization ideas. In addition to this, it is also expected to reduce the cost of bridge construction and to simplify the process of bridge manufacturing. Referring to this, composite few plate girder railway bridge is highly recommendable that is very economical with the fine exterior. In this paper, it will analyse the variation of dynamic behavior of existing composite few plate girder railway bridge with ballast caused by modified Slab Track through interpretation of limited enzyme in order to obtain the existing data for improvement of Slab Track system from Ballast Track system. Consequently, it can help maximize economic efficiency and structural capability. As a results, although the natural frequency by modified Slab Track are decreased, it is hardly influencing on the safety of railway bridges. It is also evident in the case of slab deck with a reduced scale in comparison with Ballast Track. Therefore, it is expected to reduce the cost of a railway bridge plan. And, it can expect the synergistic effect of the ensure long term durability of bridge caused by decreased stresses of bottom flange due to reduced dead load. As a result, the analytical study are carried out to investigate the composite few plate girder railway bridge could be the optimal design method for the dynamic safety of a girder section.

• Human Ecology Research
• /
• 제58권4호
• /
• pp.539-560
• /
• 2020

This study presents work-family multiple-role planning by female university students as a new approach to worklife balance. Accordingly, this study examines university years as a key time frame during which students establish their career paths. This study integrates the social cognitive career theory and the planned behavior theory to design and evaluate a model that explains the work-family multiple-role planning process; in addition, it develops an optimal model to predict the intentions of female university students in work-family multiple-role planning. This study has conducted a structural survey with 500 female university students. After inspecting the data, the responses of 435 participants were used in the data analysis (SEM) with SPSS 21.0 and AMOS 21.0. The findings include the following. First, suitability of predictive model presents a satisfying fit. The major factors in this study's model (parental support, subjective norms, attitudes toward multiple-role planning, career decision self-efficacy, and outcome expectations) are verified as direct and indirect predictors of the work-family multiple-role planning intent of female university students. Second, the strongest predictive factor for the work-family multiple-role planning intent is the social environment factor (subjective norms), indicating that the influence of social pressure on intent is relatively large. The predictive model formulated under this study's integrated theoretical framework supplements existing research that focused on attitudes toward multiple-role planning as well as provides a more profound theoretical foundation on which work-family multiple-role planning behaviors can be better understood.

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.333-336
• /
• 2017

스피커 진동판은 고유 특성에 의해 분할진동을 발생 시킨다. 이 분할진동은 진동판의 형상 변화를 가져올 정도로 뚜렷한 영향을 주는데, 본 논문에서는 IT 분야의 첨병인 스마트 폰을 포함한 초박형 멀티미디어 기기에서 많이 사용되는 마이크로 스피커를 그 대상으로 삼는다. 마이크로 스피커는 일반적인 스피커와 다른 평판형의 구조적인 형태와 공간적인 제약이 존재한다. 특히 구동 공간이 밀폐형으로 설계되어 무빙 코일에서 발생하는 열의 냉각이 열악하고 보조적인 서스펜션 구조를 갖추기 어렵다. 본 연구에서는 진동판의 열전달과 분할진동 모드의 연관성을 연구한다. 이를 위해 진동판의 레이저 스캔을 통한 분할진동 측정과 열화상 카메라 촬영을 통한 열변화 측정의 두 단계로 나누어 실험을 진행한다. 이를 통해 특정 주파수 범위에서 분할진동 모드와 열전달 형태를 비교함으로써, 열화상 카메라를 통한 촬영 결과로 진동판 분할진동 모드의 경향성을 빠르게 예상할 수 있어, 마이크로 스피커의 최적 설계에 도움이 되는 지표를 제공할 수 있을 것으로 기대한다.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.167-177
• /
• 2021

Due to various benefits such as unlimited degrees of freedom, environment adaptability, and safety for humans, engineers have used soft materials with hyperelastic behavior in various industrial, medical, rescue, and other sectors. One of the applications of these materials in the fabrication of bending soft actuators (SA) is that they have eliminated many problems in the actuators such as production cost, mechanical complexity, and design algorithm. However, SA has complexities, such as predicting and monitoring behavior despite the many benefits. The first part of this paper deals with the prediction of SA behavior through mathematical models such as Ogden and Darijani, and its comparison with the results of experiments. At first, by examining different geometric models, the cubic structure was selected as the optimal structure in the investigated models. This geometrical structure at the same pressure showed the most significant bending in the simulation. The simulation results were then compared with experimental, and the final gripper model was designed and manufactured using a 3D printer with silicone rubber as for the polymer part. This geometrical structure is capable of bending up to a 90-degree angle at 70 kPa in less than 2 seconds. The second section is dedicated to monitoring the bending behavior created by the strain sensors with different sensitivity and stretchability. In the fabrication of the sensors, silicon is used as a soft material with hyperelastic behavior and carbon fiber as a conductive material in the soft material substrate. The SA designed in this paper is capable of deforming up to 1000 cycles without changing its characteristics and capable of moving objects weigh up to 1200 g. This SA has the capability of being used in soft robots and artificial hand making for high-speed objects harvesting.

• Structural Engineering and Mechanics
• /
• 제83권5호
• /
• pp.655-669
• /
• 2022

Passive vibration control devices like tuned liquid column dampers (TLCD) not only significantly reduce buildings' vibrations but also can serve as a water storage facility. The recently introduced modified form of TLCD known as tuned liquid column ball damper (TLCBD) suppressed external vibration efficiently compared to traditional TLCD. For excellent performance, the mass ratio of TLCBD should be in the range of 5% to 7%, which does not include the mass of the ball. This additional mass of the ball increases the overall structure mass. Therefore, in this paper, an effort is made to reduce the mass of TLCBD. For this purpose, a new modified version of TLCBD known as tuned liquid column hollow ball damper (TLCHBD) is proposed. The existing mathematical modeling of TLCBD is used for this new damper by updating the numerical values of the mass and mass moment of the ball. Analytically the optimal design parameters are obtained. Numerically the TLCHBD is investigated with a single degree of freedom structure under harmonic and seismic loadings. It is found that TLCHBD performance is similar to TLCBD in both loadings' cases. To validate the numerical results, an experimental study is conducted. The mass of the ball of TLCHBD is reduced by 50% compared to the ball of TLCBD. Both the arrangements are studied with a multi-degree of freedom structure under harmonic and seismic loadings using a shake table. The results of the experimental study confirm the numerical findings. It is found that the performance behavior of both the dampers is almost similar under harmonic and seismic loadings. In short, the TLCHBD is lighter in weight than TLCBD but has a similar vibration suppression ability.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4146-4158
• /
• 2022

Ultra-high performance concrete (UHPC) has been widely utilized in military and civil protective structures to resist intensive loadings attributed to its excellent properties, e.g., high tensile/compressive strength, high dynamic toughness and impact resistance. At present, aiming to improve the defects of the traditional vertical concrete cask (VCC), i.e., the external storage facility of spent fuel, with normal strength concrete (NSC) shield, e.g., heavy weight and difficult to fabricate/transform, the feasibility of UHPC applied in the shield of VCC is numerically examined considering its high radiation and corrosion resistance. Firstly, the finite element (FE) analyses approach and material model parameters of NSC and UHPC are verified based on the 1/3 scaled VCC tip-over test and drop hammer test on UHPC members, respectively. Then, the refined FE model of prototypical VCC is established and utilized to examine its dynamic behaviors and damage distribution in accidental tip-over and end-drop events, in which the various influential factors, e.g., UHPC shield thickness, concrete ground thickness, and sealing methods of steel container are considered. In conclusion, by quantitatively evaluating the safety of VCC in terms of the shield damage and vibrations, it is found that adopting the 300 mm-thick UHPC shield instead of the conventional 650 mm-thick NSC shield can reduce about 1/3 of the total weight of VCC, i.e., about 50 t, and 37% floor space, as well as guarantee the structural integrity of VCC during the accidental drop simultaneously. Besides, based on the parametric analyses, the thickness of concrete ground in the VCC storage site is recommended as less than 500 mm, and the welded connection is recommended for the sealing method of steel containers.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.673-686
• /
• 2023

Determining the properties of pile from cone penetration test (CPT) is costly, and need several in-situ tests. At the present study, two novel hybrid learning models, namely PSO-RF and HHO-RF, which are an amalgamation of random forest (RF) with particle swarm optimization (PSO) and Harris hawks optimization (HHO) were developed and applied to predict the pile set-up parameter "A" from CPT for the design aim of the projects. To forecast the "A," CPT data along were collected from different sites in Louisiana, where the selected variables as input were plasticity index (PI), undrained shear strength (S_u), and over consolidation ratio (OCR). Results show that both PSO-RF and HHO-RF models have acceptable performance in predicting the set-up parameter "A," with R² larger than 0.9094, representing the admissible correlation between observed and predicted values. HHO-RF has better proficiency than the PSO-RF model, with R² and RMSE equal to 0.9328 and 0.0292 for the training phase and 0.9729 and 0.024 for testing data, respectively. Moreover, PI and OBJ indices are considered, in which the HHO-RF model has lower results which leads to outperforming this hybrid algorithm with respect to PSO-RF for predicting the pile set-up parameter "A," consequently being specified as the proposed model. Therefore, the results demonstrate the ability of the HHO algorithm in determining the optimal value of RF hyperparameters than PSO.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.391-399
• /
• 2008

강바닥판 포장에 사용되는 특수아스팔트 중의 하나인 구스아스팔트는 $240^{\circ}C$이상의 고온 상태에서 포설되기 때문에 시공중인 교량에 예상하지 못한 높은 온도와 이에 따른 열변형 및 열응력을 발생시킬 수 있다. 본 연구에서는 고온의 아스팔트 시공이 강바닥판에 미치는 열영향을 평가하고 이를 최소화하는 최적 포장공정을 찾기 위한 수치해석기법으로 등가열원을 이용한 열응력해석 기법을 제시하였다. 등가열원은 포장체 포설시의 열영향을 강상판 내부에서 발생하는 등가의 가상열원이다. 이를 이용하여 일반적인 구조해석 프로그램에서 구현하기 어려운 포장체의 포설에 의한 열전도, 열대류 등을 쉽게 모사할 수 있다. 포장 시공중 지점의 들림을 고려한 강상판 해석 및 다양한 포설 공정을 적용한 곡선교량해석을 통하여 등가열원방법의 적용성을 검토하였다.