• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.436-440
• /
• 2012

This study was carried out to find optimal rice varieties and selection index for sushi. The suitability tests about appearance and palatability were conducted by 31 professional sushi chefs and the physicochemical and pasting properties of the selected 7 rice varieties (Koshihikari, Dami, Deuraechan, Boramchan, Juanbyeo, Sindongjin and Hopum) of milled and cooked rice were evaluated. According to the adaptability for sushi shape and taste of rice, Hopum and Sindongjin showed more suitable appearance and taste than others. Also, they showed remarkable pasting properties similar to Koshihikari which is widely known as a suitable for sushi. In the relationship between suitability and pasting properties for sushi, peak viscosity and breakdown viscosity showed highly positive correlation, and setback viscosity showed negative correlation. These results suggest that pasting properties can be applied to select the suitable varieties for sushi.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.491-496
• /
• 2007

This study conducted a chemical experiment on the Leisegang phenomenon, which is known to be the principle of rhyolite formation, and analyzed the results. Even if the same chemical elements precipitated, the shape of Leisegang rings was different according to the condition of medium and depending on inner electrolyte and outer electrolyte. The experiment used agar, gelatin and mung-bean jelly as media. We prepared 0.01M inner electrolyte containing agar 1%, gelatin 2% and mung-bean jelly 5% and curdled the solution at room temperature for 12 hours and, as a result, we obtained viscosity optimal for experimenting on the diffusion of outer electrolyte, and Leisegang rings appeared clearly according to the characteristic of each chemical element. In $PbI_2$ with solubility product($K_{sp}$) of $7.9{\times}10^{-9}$ the intervals of Leisegang rings caused by the reaction of inner electrolyte 0.01M KI and outer electrolyte 25% $Pb(NO_3){_2}$ were narrow between 0.01cm and 0.12cmm but increased gradually, but in with of $8.3{\times}10^{-17}$ the intervals of Leisegang rings caused by the reaction of inner electrolyte 0.01M KI and outer electrolyte 25% $AgNO_3$ were between 0.7cm and 0.45cm and decreased gradually. This suggests that, in the chemical formation of Leisegang rings, the interval and size of the rings are correlated with the solubility product of the precipitates.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

High power lasers provide a controllable and precise energy source in surface transformation hardening. A careful control of the process is needed in order that the surface layer of the material reaches the austenizing temperature, but that it does not melt. In order to achieve this the results of theoretical and experimental studies on the laser surface hardening of a medium carbon steel are described. A two-dimensional computer program, which can be used generally for the determination of transient temperature distributions in welding and heat treatment, was established on the basis of the finite element method. For the confirmation of the accuracy of the numerical analysis, a medium carbon steel (SM 45C) of 5mm thickness was heat-treated with a 1kW CW CO$_{2}$ laser machine, while the traverse speed and the distance from the focal point (defocused distance) were varied. Experimental and numerical results showed a similar tendency in correlations between the hardened zone shape and the process parameters. With increasing beam spot diameter the width and depth of the hardened zone increased for relatively small beam spot diameters, but decreased rapidly after reaching the maximum value, while with increasing traverse speed the width and depth of the hardened zone decreased monotonously. Too small beam spot diameters are to be avoided, since the surface melting would lower the surface hardness and produce an uneven surface which may be unacceptable because of the possible requirement for subsequent machining. It could be observed that for a given traverse speed and laser power input there exists a optimal range of the beam spot diameter, which produce a large width of the hardened zone but no melting on the surface.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.375-384
• /
• 2005

Three dimensional urban models are being increasingly applied for various purposes such as city planning, telecommunication cell planning, traffic analysis, environmental monitoring and disaster management. In recent years, technologies from CAD and GIS are being merged to find optimal solutions in three dimensional modeling of urban buildings. These solutions include modeling of the interior building space as well as its exterior shape visualization. Research and development effort in this area has been performed by scientists and engineers from Computer Graphics, CAD and GIS. Computer Graphics and CAD focussed on precise and efficient visualization, where as GIS emphasized on topology and spatial analysis. Complementary research effort is required for an effective model to serve both visualization and spatial analysis purposes. This study presents an efficient way of using the CAD plans included in the building register documents to reconstruct the internal space of buildings. Topological information was built in the geospatial database and merged with the geometric information of CAD plans. as well as other attributal data from the building register. The GIS network modeling method introduced in this study is expected to enable an effective 3 dimensional spatial analysis of building interior which is developing with increasing complexity and size.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.316-319
• /
• 2010

The gray mold disease occurred on tuberous roots of yacon in storage facilities in Gangneung, Korea, in March 2010. Symptoms typically appeared as in the form of dark brown discoloration on the surface of tuberous roots and water-soaked brown lesions in cross sections of the affected portions. A total of five isolates of Botrytis sp. were obtained from the symptomatic portions. All isolates on potato-dextrose agar (PDA) produced abundant conidia which were pale brown, one-celled, mostly ellipsoid or ovoid in shape and $8.2{\sim}14.8{\times}6.5{\sim}9.9\;{\mu}m$ in size. Large numbers of round to irregular, smooth, black, hard sclerotia were produced on PDA over time. The optimal temperature for mycelial growth and sclerotia formation of the fungal isolates was $20^{\circ}C$. On the basis of morphological and cultural characteristics, all the fungal isolates were identified as Botrytis cinerea. Pathogenicity test on host plants showed that the fungus could infect not only tuberous roots but also leaves and petioles of yacon. This is the first report on gray mold of yacon (Smallanthus sonchifolius) caused by Botrytis cinerea in Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.23-33
• /
• 2017

In this study, water and organic treatment efficiency and operating characteristics (temperature, salinity effect) were evaluated when food waste with high water content was treated by Bio-dying method. In addition, the optimum conditions for producing pellets for evaluating the decomposition products as SRF(Solid Refuse Fuel) after Bio-drying and evaluating the use value of SRF as a solid fuel were analyzed. As a result, the temperature, $CO_2$ concentration, organic matter removal rate and weight reduction rate according to the daily dose were about 86% and 68% at the input of 2.4 kg/day. The optimal food waste input was estimated to be 2.4 kg/day. As a result of the pellet molding and produce, Pellets can be produced within 10~25% of raw material water content. It was judged that the water content of 25%, which showed the best quality results in terms of external shape maintenance and strength. The high calorific value of SRF of decomposition products after Bio-drying was more than 3,500 kcal/kg.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.207-210
• /
• 2016

In 2010, a new variety for sawdust cultivation,was produced by monokaryotic-monokaryotic crossing between Sanjo 701ho and FMRI0995. The optimum temperature for Sanjo 708ho mycelial growth was $25^{\circ}C$; mycelial growth on potato dextrose agar was 51.6 mm over 7 days. The fruiting pattern was sporadic, and the optimal temperature range for fruiting was $5{\sim}20^{\circ}C$. Regarding fruiting body characteristics, the pileus was 65.8 mm in size, 16.1 mm in thickness, and hemispherical in shape. The stipe was 42.6 mm in and 19.6 mm in thickness. Mproductivity was good during thelow-temperature period from autumn to spring, with an average productivity of 310.7 g/bag.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.146-157
• /
• 1994

Wasong(Orostachys japonicus A. Berger) has been used as anti-cancer medicinal plants from ancient time. This experiment was conducted to obtain some fundamental informations concerning anatomical study, germination test, soil analysis of indigenious districks, adaptaion of soil for wasong. The leaf of wasong was xerotype with spine, mesophyl chloroplast is dense surrounded vascular bundle, with a many large water storage tissue without chloroplast, and was bifacial stomata leaf type. The stem of wasong was amphicribral vascular bundle, central cylinder was cylinder type and protostele. Root was polarch type, potoxylem of it's was arranged in ring shape of annulation and metaxylem. The structure of flower was cymose, was caylyx of 5 sepals, corolla of 5 petals, roecium of 10 stames, ovules of five, placentation parietal, ovary superior, axile placenta. The optimum temperature for seed germination was $25^{\circ}C$ under light and germination percentage was 22.5%. Dormancy breaking was effective for 6-8 days at 5$^{\circ}C$ and at 100 ppm level of $GA_3$ The soil analysis of wasong local districks, content of available $P_2O_5$, Ca were higer than optimal level of upland and C.E.C., exchangeable k was not significantly different of that, but exchangeable magnesium was very low. The growth of wasong was affected draining regardless soil combination treatment.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.231-242
• /
• 2010

In order to assess applicability of debris flow simulation on natural terrain in Korea, this study introduced the DEBRIS-2D program which had been developed by Liu and Huang (2006). For simulation of large debris flows composed of fine and coarse materials, DEBRIS-2D was developed using the constitutive relation proposed by Julien and Lan (1991). Based on the theory of DEBRIS-2D, this study selected a valley where a large debris flow was occurred on July 16th, 2006 at Deoksanri, Inje county, Korea. The simulation results show that all mass were already flowed into the stream at 10 minutes after starting. In 10minutes, the debris flow reached the first geological turn and an open area, resulting in slow velocity and changing its flow direction. After that, debris flow started accelerating again and it reached the village after 40 minutes. The maximum velocity is rather low between 1 m/sec and 2 m/sec. This is the reason why debris flow took 50 minutes to reach the village. The depth change of debris flow shows enormous effect of the valley shape. The simulated result is very similar to what happened in the field. It means that DEBRIS-2D program can be applied to the geologic and topographic conditions in Korea without large modification of analysis algorithm. However, it is necessary to determine optimal reference values of Korean geologic and topographic properties for more reliable simulation of debris flows.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.651-654
• /
• 2011

Cymbidium 'Orange Bowl' (Lucky Rainbow 'Randevous' ${\times}$ 'Eastern Star') was developed from a cross between hybrids at the National Institute of Horticultural & Herbal Science, Rural Development Administration in 2006. A cross was made between the pink colored flower C. Lucky Rainbow 'Randevous' as maternal line and pure yellow colored flower, C. 'Eastern Star' as paternal line in 1995. The seed germination, cultivation, selection, and characteristic trials were conducted from 1996 to 2006. The line was named as Wongyo F1-18 and phenotype was characterized in 2006 as a new 'Orange Bowl'. The 'Orange Bowl' has having light yellow basal color (RHS, YO21D) and orange line (RHS, OR30B) on both of sepal and petal with red lip (RHS, OR30B). 'Orange Bowl' has about 10.9 flowers per flower stalk and flower size of 7.4 cm. General appearance of the petals and sepals is slightly incurved shape. The plant size is intermediate having erect peduncle. Blooming is started from the late of January (mid winter) under optimal culture condition. Leaf attitude and twisting is half- erect and very weak respectively. This hybrid has attractive floral arrangement, long flower stalk (71.8 cm) and vigorous growth. We expect that 'Orange bowl' has a great potential for exporting to Chinese market.