• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.52-66
• /
• 2003

Generally we have difficulty in removing oil using mechanical devices because recovery rate and recovery efficiency decrease remarkably when operating in thin oil films or in oils of very high viscosity In the Present study a series of experiments were carried out to study the effect of operating conditions on the rate of recovery for the spilled oil using a drum type skimmer. For each set of experiments depth of immersion, oil film thickness and the circumferential speeds were varied systematically to find the effects on the recovery rate. The results shows that recovery rate is dependent on the contact angle for the depth of immersion and the highest rate of oil recovery shows in the case of a contact angle of 45°(h/d=0.15). For the removal of spilled oil the optimal circumferential speed can be found as the critical value to reach the saturated recovery rate for a given oil film thickness and depth of immersion. Even in thin oil thickness we have enough recovery rate and recovery efficiency within critical circumferential speed this way.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3825-3828
• /
• 2014

Surgical outcomes of colorectal cancer treatment depend not only on good surgery and tumor biology but also on an optimal perioperative care. The enhanced recovery program (ERP) - a multidisciplinary and multimodal approach, or so called 'fast-track surgery' - has been designed to minimize perioperative and intraoperative stress responses, and to support the recovery of organ function aiming to help patients getting better sooner after surgery. Compared with conventional postoperative care, the enhanced recovery program results in quicker patient recovery, shorter length of hospital stay, faster recovery of gastrointestinal function, and a lower incidence of postoperative complications. Although not firmly established as yet, the enhanced recovery program after surgery could be of oncological benefit in colorectal cancer patients because it can enhance recovery, maintain integrity of the postoperative immune system, increase feasibility of postoperative chemotherapy, and shorten the time interval from surgery to chemotherapy. This commentary summarizes short-term outcomes and potential long-term benefits of enhanced recovery programs in the treatment of colorectal cancer.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.3
• /
• pp.312-321
• /
• 2007

We address a disposal issue of returned products in a product recovery system where a single product is stocked in order to meet a demand from customers who may return products after usage. Product returns occur randomly and can be accepted for remanufacturing or disposed of depending on the state of the system. We examine the structure of the optimal disposal policy for returned product that utilizes the information of the inventory of both serviceable and remanufacturable products. Numerical study indicates that it can be characterized by a monotonic threshold type of the curve. A disposal is allowed only when the remanufacturable inventory level exceeds a threshold which is the function of the inventory level of serviceable product and it is decreasing as the serviceable inventory level increases. Sensitivity analysis also indicates that the optimal disposal policy and the optimal profit have monotonic properties with respect to system parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.4
• /
• pp.281-286
• /
• 2011

The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.103-108
• /
• 2015

Production of foreign proteins by transgenic plant cell cultures has several advantages such as post-translational modification, low risk of product contamination and low-cost production and purification. However, target proteins are degraded by extracellular proteases existing in the media. A solution to this problem is the use of perfusion culture and ion exchange chromatography for the application of integrated bioprocess using in situ recovery. With this method, production of human granulocyte-macrophage colony-stimulating factor (hGM-CSF) was investigated in this study. First, optimization of cell concentration during the induction phase for the production of hGM-CSF was examined. As cell concentration increased, the level of hGM-CSF was decreased due to the presence of extracellular proteases. Induction using sugarfree media produced 33% more hGM-CSF. The effects of pH on the binding of hGM-CSF to cationic and anionic exchange resins were also investigated. In terms of stability, optimal pH was found to be 5~7. In the case of using buffer exchange when CM-Sepharose was used as a cationic exchange resin, optimal pH for binding was 4.8 and adsorption yield was 77%. When DEAE-Sepharose was used as an anionic exchange resin, it was 5.5 (74%). Without buffer exchange, optimal pH was 4.6 (84%). From these results, an integrated bioprocess using in situ recovery with simultaneous production and separation of foreign protein in transgenic plant cell suspension cultures was found to be feasible.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.55-66
• /
• 2019

Storage system often applies erasure codes to protect against disk failure and ensure system reliability and availability. Liberation code that is a type of coding scheme has been widely used in many storage systems because its encoding and modifying operations are efficient. However, it cannot effectively achieve fast recovery from single disk failure in storage systems, and has great influence on recovery performance as well as response time of client requests. To solve this problem, in this paper, we present HRSF, a Hybrid Recovery method for solving Single disk Failure. We present the optimal algorithm to accelerate failure recovery process. Theoretical analysis proves that our scheme consumes approximately 25% less amount of data read than the conventional method. In the evaluation, we perform extensive experiments by setting different number of disks and chunk sizes. The results show that HRSF outperforms conventional method in terms of the amount of data read and failure recovery time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.68-74
• /
• 2005

Optimal shape of a typical ramjet intake is examined numerically to maximize the total pressure recovery. A response surface method is introduced to approximately predict its performance with respect to the design parameters over the each design domain. The first deflection angle of ramp, the area of inlet throat, and the diffuser angle are chosen as a design parameter. ANOVA is used to verify the trustability of the achieved response surface. The total pressure recovery of the optimum model, compared to that of the base model, is increased by 36%. The loss of viscosity through the diffuser is estimated less than 5%.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.267-273
• /
• 2018

Hydrothermal liquefaction of Chlorella vulgaris feedstock containing 80% (w/w) water was conducted in a batch reactor as a function of temperature (300, 325 and $350^{\circ}C$) and reaction times (5, 10 and 30 min). The biocrude yield, elemental composition and higher heating value obtained for various reaction conditions helped to predict the optimum conditions for maximizing energy recovery. To optimize the recovery of inorganic nutrients, we further investigated the effect of reaction conditions on the ammonium ($NH_4{^+}$), phosphate ($PO_4{^{3-}}$), nitrate ($NO_3{^-}$) and nitrite ($NO_2{^-}$) concentrations in the aqueous phase. A maximum energy recovery of 78% was obtained at $350^{\circ}C$ and 5 min, with a high energy density of 34.3 MJ/kg and lower contents of oxygen. For the recovery of inorganic nutrients, shorter reaction times achieved higher phosphorus recovery, with maximum recovery being 53% at $350^{\circ}C$ and 5 min. Our results indicate that the reaction condition of $350^{\circ}C$ for 5 min was optimal for maximizing energy recovery with improved quality, at the same time achieving a high phosphorus recovery.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.