• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.747-752
• /
• 1994

The switched reluctance motor has high efficiency over a wide range of speed and torque. However the switched reluctance motor exhibit comparatively low efficiency in the chopped excitation which produces additional inverter losses. This paper examines the optimal efficiency operation using choppingless excitation under the changed supply voltage. The excitation is designed to produce the required torque and speed satisfying the optimal efficiency in a nonlinear switched reluctance motor. The optimal algorithm is applied to 119 operation points which are chosen over the full range of driving torque and speed. The result in this paper indicate the improved efficiency comparing to the efficiency obtained by both switched and chopped excitataions under a fixed supply voltage.

• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.67-86
• /
• 1995

It requires the detector system which can collect highly reliable traffic data in order to perform the real-time traffic signal control. This study is to decide the optimal shape of inductive loop for the real-time traffic signal control .This loop is located at the stopline in the signalized intersection for DS(Degree of Saturation) control. In order to find out the optimal shape of loop, 6types of experiments were performed . The results of the basic experiments of loops are as follows ; -the optimal number of turns for loop is 3 turns. -the impedance values of the loop detectors are similar to that of NEMA standards -the 1.8${\times}$4.5M loop is excellent for sensitivity in actual detection range of car length comparing to other shape of inductive loops. At the experimental of establishments of the optimal loop shape, it found that 1.8 4.5M loop has the highest values of $\DeltaL$ comparing to other types of loops, It means that the range of Lead-in cable length of this loop. And this loop is highly reliable in occpupancy time. Conclusivley, the 1.8${\times}$4.5M inductive loop is the optimal solution as a stop line loop detector for real -time traffic signal control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.31-37
• /
• 2010

Based on the analyses of satellite range measurement, the optimal operation for satellite range measurement of KOMPSAT II, which operates in the low-earth orbit, was proposed in this paper. The orbital motion of the satellite was analyzed in viewpoints of radial velocity, acceleration and speed of acceleration. Correspondingly the effects for satellite ranging signal due to satellite motion were analyzed in viewpoints of doppler phenomena, which are doppler frequency, doppler rate and speed of doppler rate. The accuracy and ambiguity probability of the satellite range measurement were quantitatively analyzed under various circumstances. The optimal operation parameters for satellite range measurement were also analyzed based on the analyzed results. The analyzed results in this paper can be utilized in design of small-sized ground station for satellite range measurement.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.47-56
• /
• 2008

In the detection of an underwater target, there exists an optimal search depth for the sonar systems, at which the Probability of Detection is maximized. The optimal search depth is dependent on the depths of the target and sonar, the sound speed profile, and the bathymetry. In this paper, we address this question in range-dependent environments, particularly for the bathymetry with slope and with warm eddy. For range-dependent bathymetry, the typical sound profile in the East Sea of Korea was used. The detection range was greater when the sonar was located in deep water than in shallow water. As for the case of eddy, mesoscale warm eddy was used, and the detection range was greater when looking out of the warm eddy than when looking into the eddy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.178-183
• /
• 1993

This paper presents a new optimal range of the step size to converge LMS adaptive algorithm considering quantization error of equalizer coefficient and excess MSE. And the simulation of transversal equalizer shows the propriety of it.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.158-159
• /
• 2003

In four-wave-mixing wavelength converter, we investigated the performance through simulation by using VPI tool, changing the input signal power and CW power at 2.SGb／s. Controlling optimal CW power to each input signal power, we extended the input signal power range to 20dB, which guarantees the minimum power penalty.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.56-61
• /
• 2004

An optimal cooling method for a long HTS power transmission cable was scrutinized by using theoretical models. Cooling length of HTS cable is determined by pressure range and temperature range of LN2 in the HTS cable. Results showed limitation from temperature range is stricter than that from pressure range. The well-known one-side cooling was modified to two-side cooling. It was shown that cooling length can be nearly doubled by adopting two-side cooling of the same capacity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.113-118
• /
• 1997

A new approach to process optimal design in non-isothermal, non-steady state metal forming is presented. In this approach, the optimal design problem is formulated on the basis of the integrated thermo-mechanical finite element process model so as to cover a wide range of the objective functions and design variables, and the derivative based approach is adopted for conducting optimization by design iteration. The process model, the formulation for process optimal design, and the procedures for the evaluation of the design sensitivity and for design iteration for optimization are described.