• 한국수산과학회지
• /
• 제36권6호
• /
• pp.669-675
• /
• 2003

To increase fishery resources in coastal waters, juvenile fish and bivalves are artificially released every year in Korea. This study provides a methodology to estimate an optimal release quantity based on the carrying capacity of the receiving basins. Carrying capacity was defined by E.p. Odum's theory of ecosystem development as the upper limit of biomass, where total system respiration equals total primary production. The Ecopath trophic ecological model was used to determine carrying capacity in the surfzone ecosystem of Bangjukpo on the southern coast of Korea. Using a top-down control method, various biomasses of fish groups were given to the simulation, with primary production constant and no catch. The results showed that biomass of selected fish groups increased by two orders of magnitude, yielding a five-fold increase in overall consumer biomass. The resultant values are 10 times higher than those estimated in open seas. This can be explained by higher primary production in the Bangjukpo surfzone ecosystem. This method can be used for strategic releases and ecosystem management, particularly when based on an ecological background.

• 수산경영론집
• /
• 제46권2호
• /
• pp.59-74
• /
• 2015

This study aims to estimate optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the offshore Stow Net and the offshore Gill Net fisheries using the current value Hamiltonian method and the surplus production model. As analyzing processes, firstly, this study uses the Gavaris general linear model to estimate standardized fishing efforts of yellow croaker caught by the above multiple fisheries. Secondly, this study applies the Clarke Yoshimoto Pooley(CY&P) model among the various exponential growth models to estimate intrinsic growth rate(r), environmental carrying capacity(K), and catchability coefficient(q) of yellow croaker which inhabits in offshore area of Korea. Thirdly, the study determines optimal harvesting production, fishing efforts, and stock levels of yellow croaker using the current value Hamiltonian method which is including average landing price of yellow croaker, average unit cost of fishing efforts, and social discount rate based on standard of the Korean Development Institute. Finally, this study tries sensitivity analysis to understand changes in optimal harvesting production, fishing efforts, and stock levels of yellow croaker caused by changes in economic and biological parameters. As results drawn by the current value Hamiltonian model, the optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the multiple fisheries were estimated as 19,173 ton, 101,644 horse power, and 146,144 ton respectively. In addition, as results of sensitivity analysis, firstly, if the social discount rate and the average landing price of yellow croaker continuously increase, the optimal harvesting production of yellow croaker increases at decreasing rate and then finally slightly decreases due to decreases in stock levels of yellow croaker. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts of the multiple fisheries decreases, but the optimal stock level of yellow croaker increases. The optimal harvest starts climbing and then continuously decreases due to increases in the average unit cost. Thirdly, when the intrinsic growth rate of yellow croaker increases, the optimal harvest, fishing efforts, and stock level all continuously increase. In conclusion, this study suggests that the optimal harvesting production and fishing efforts were much less than actual harvesting production(35,279 ton) and estimated standardized fishing efforts(175,512 horse power) in 2013. This result implies that yellow croaker has been overfished due to excessive fishing efforts. Efficient management and conservative policy on stock of yellow croaker need to be urgently implemented.

• 산업공학
• /
• 제10권1호
• /
• pp.15-22
• /
• 1997

In semiconductor manufacturing, the probe process between fabrication and assembly process is constrained mostly by the equipment capacity because most products pass through the similar procedures. The probe process is usually performed in a batch mode with relatively short cycle times. The capability of the probe process can be determined by the optimal combination of the equipments and the products. A probe line usually has several types of equipment with different capacity. In this study, the probe line is modeled in terms of capacity to give the efficient planning and control procedure. For the practical usage, the hierarchical capacity planning procedure is used. First, a monthly capacity plan is made to meet the monthly production plan of each product. Secondly, the daily capacity planning is performed by considering the monthly capacity plan and the daily fabrication output. Simple heuristic algorithms for daily capacity planning are developed and some experimental results are shown.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.106-118
• /
• 2007

This paper present a new optimization model to generate aggregate production planning by considering electric cost. The new Time Of Switching (TOS) electric type is introduced by switching over Time Of Day (TOD) and Time Of Use (TOU) electric types to minimize the electric cost. The fuzzy demand and Dynamic inventory tracking with multiple plant capacity are modeled to cover the uncertain demand of customer. The constraint for minimum hour limitation of plant running per one start up event is introduced to minimize plants idle time. Furthermore; the Optimal Weight Moving Average Factor for customer demand forecasting is introduced by monthly factors to reduce forecasting error. Application is illustrated for multiple cement mill plants. The mathematical model was formulated in spreadsheet format. Then the spreadsheet-solver technique was used as a tool to solve the model. A simulation running on part of the system in a test for six months shows the optimal solution could save 60% of the actual cost.

• 한국유통학회지:유통연구
• /
• 제2권1호
• /
• pp.59-85
• /
• 1997

The automobile industry in Korea has grown to the fifth in the world in terms of production capacity. In spite of the production growth, the marketing aspects such as distribution and customer service in the auto industry are still behind the world-class. Thus, the major purposes of this paper are as follows. The first is to analyze competitive structure of the industry and to compare distribution strategies of the major auto firms(Hyundai, Daewoo, and Kia). The second is to theoretically explain the transition from the vertical marketing system to the dealer system using transaction cost analysis. The third is to compare auto distribution channels in Korea with those in the U.S. and Japan. Finally, an optimal channel stucture in the auto industry is suggested after reviewing five alternative channel structures such as corporate-owned VMS, sales-specializing firm, multiplex system(VMS+limited dealer system), dual sales channel, and advanced dealer system. In the short-run, sales-specilizing firm was suggested as an optimal channel system to enhance customer satisfaction by integrating sales and customer service. In the long-run, advanced dealer system through regional differentiation was desirable for an optimal channel structure by organically integrating new car sales, used car sales, and after service to provide total marketing service to customers.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 추계학술대회 및 정기총회
• /
• pp.36-40
• /
• 1998

Tool shop of the‘D’Motor Co.(DMC) fabricates dies for producing automotive press panels. In order to increase the production capacity of the tool shop, DMC established an FMS that consists of high-speed machines and a CMM at the tool shop in 1997. Due to the difference in machine capability among the existing machines and the new FMS it is needed to find an optimal way of allocating workloads among machines to maximize the production. In a way to solve this, we model the die fabrication process of the tool shop and analyze its performance by computer simulation. In this study, we at first identify the bottleneck processes of the die fabrication process under the current operation policy. Then, we derive some alternative operating policies applicable to the tool shop, and analyze the optimal operation policy by comparing the performance of the tool shop following each alternative policy.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.802-810
• /
• 1998

The purpose of this study is to find the analytic solution of determining the optimal capacity of processes and storages to meet the product demand. Recent trend to reduce product delivery time and to provide high quality product to customer requires the increasing capacity of storage facilities. However, the cost of constructing and operating storage facilities is becoming substantial because of increasing land value, environmental and safety concern. Therefore, reasonable decision making about the capacity of processes and storages is important subject for industries. The industrial solution for this subject is to use the classical economic lot sizing method, EOQ(Economic Order Quantity) model, trimmed with practical experience but the unrealistic assumption of EOQ model is not suitable for the chemical plant design with highly interlinked processes and storages. This study, a first systematic attempt for this subject, clearly overcomes the limitation of classical lot sizing method. The superstructure of the plant consists of the network of serially and/or parallelly interlinked processes and storages. A novel production and inventory analysis method, PSW(Periodic Square Wave) model, is applied. The objective function of optimization is minimizing the total cost composed of setup and inventory holding cost. The advantage of PSW model comes from the fact that the model provide a set of simple analytic solution in spite of realistic description of material flow between process and storage. The resulting simple analytic solution can greatly enhance the proper and quick investment decision for the preliminary plant design confronting diverse economic situation.

• 대한산업공학회지
• /
• 제22권4호
• /
• pp.677-687
• /
• 1996

We study simultaneous decision making model for a monopolistic or competitive supplier to decide inventory and pricing policies under capacity constraint. Economic implications are obtained from the optimality conditions such as production lot sizes, pricing schedules and so on. Sensitivity analysis gives us the optimal relations among the critical economic quantities.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.476-480
• /
• 2002

The theory of constraints (TOC) has become a valuable system in modern operations management. Using the ideas and methods of the TOC, companies can achieve a large reduction of work-in-process and finished-goods inventories, significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to calculate the optimal size of the time buffer which is used to accommodate disruptions in production processes and provide maximum productivity of capacity constrained resources. After the problem formulation in terms of single server queueing model, we observed the system behavior by sensitivity analyses.

• 산업경영시스템학회지
• /
• 제24권67호
• /
• pp.19-26
• /
• 2001

A design issue for a flexible manufacturing system is to find the number of each resource type which assures a given production ratio with a minimal cost. The FMS is modeled as a closed queueing network with a local buffer of limited capacity. An efficient method to determine this optical configuration is presented. The proposed method consists of three steps : 1) determine a lower configuration, 2) derive a heuristic solution, 3) find the optimal solution. The derived heuristic solutions are close to the optical solution.