• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.163-172
• /
• 2012

As more diesel engines have been employed in underground limestone mines with large cross section, underground space environment is worsened by diesel exhausts and heat flow. This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow, diesel exhaust gas concentrations and the effects of mechanization and deepening working face on temperature and humidity. Due to the insufficient capacity of the main exhaust fan and poor airway management, stagnant airflows were observed at various locations, while the flow direction was reversed instantly with passing diesel equipment and the flow reversal was also made by the seasonal variation of the outside surface weather. During the loading operation, CO concentration measurements were found to be frequently higher than the threshold limit of 50 ppm, and most of the $NO_2$ measurements during drilling and loading operations shows even more serious levels surpassing the permissible limit of 3 ppm. The actual ventilation quantity was considerably less than the required quantity estimated by the mine health and safety law, and this shortage problem was less serious in colder winter showing more effectiveness of the natural ventilation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2779-2784
• /
• 2015

The prediction of the accurate traffic information can provide an optimal route from the place of departure to a destination, therefore, this makes it possible to obtain a saving of time and money. To predict traffic information, we use a Bayesian network method based on probability model in this paper. Existing researches predicting the traffic information based on a Bayesian network generally used to study the data for all time. In this paper, however, only data corresponding to same time and day of the week to predict selectively will be used for learning. In fact, the experiment was carried out for 14 links zone in Seoul, also, the accuracy of the prediction results of the two different methods should be tested with MAPE (Mean Absolute Percentage Error) which is commonly used. In view of MAPE, experimental results show that the proposed method may calculate traffic prediction value with a higher accuracy than the method used to learn the data for all time zones.

• Journal of Gastric Cancer
• /
• v.5 no.3 s.19
• /
• pp.139-145
• /
• 2005

Gastric cancer is the most prevalent cancer in Korea and comprises the second cause of cancer death. Surgery only can provide chance of cure, but most locally advanced cancers recur after a curative resection, even though important advances in the surgical and nonsurgical treatments of gastric cancer have taken place. Preoperative chemotherapy theoretically can provide the advantages of reducing the bulk of tumor, which might improve the R0 resection rate, and of treating micrometastases early. Also, preoperative chemotherapy is expected to render unresectable tumors resectable without increasing postoperative morbidity and mortality. There are many new chemo-therapeutic agents available for the treatment of advanced gastric cancer, but still the most effective agent, the optimal time and number of cycle for administration are still not known. The addition of postoperative chemotherapy through an intraperitoneal route and/or radiotherapy might affect the outcome of surgery favorably, but that hasn't been proved yet. A multicenter prospective randomized phase III trial should be peformed to answer for those questions and to improve the curability of gastric cancer treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6793-6803
• /
• 2014

A self-administered survey was conducted on dental hygiene students at colleges or universities in Chungcheong Province to increase the levels of practice for them and provide basic data that could improve their major satisfaction after practice. The data was collected from December 2012 to April 2013 and 766 questionnaires, except for 13 containing insincere responses, were finally analyzed using SPSS/Win18.0. The on- and off-campus practice groups formed 59.7% and 57.4%, respectively. The most frequent place for practice was university dental hospitals, followed in order by hospitals/clinics and health centers. University students were more satisfied with on-campus practice in terms of factors, such as practice contents, practice time, and practice performance than those at three-year colleges. The students in the higher grades were more satisfied with the practice time. The university students were also more satisfied with off-campus practice in terms of all the factors than those at three-year colleges. The students in higher grades were more satisfied with the practice time and practice performance. The on- or off-campus practice group was generally more satisfied with their major than the non-practice group, and each of the factors-practice performance, practice time, practice environment, and practice contents-significantly affected the major satisfaction. The results highlight the need to plan and provide satisfactory education based on an understanding and awareness of students so that they can take pride in their major through on- and off-campus practice. In addition, it is also necessary to develop educational guidelines for clinical practice and efficient programs so that clinical practice can create the optimal learning situation.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.82-89
• /
• 2023

Microalgae, as photosynthetic organisms, possess the ability to produce a diverse array of bioactive compounds. This study focused on the transformant Chlamydomonas reinhardtii dZL and subjected it to cultivation under varying light intensities (60, 120, 180, and 240 µmol/m²/s). Our aim was to assess the impact of light intensity on both microalgal biomass and carotenoid production. The cultivation took place in 80 mL bubble column photobioreactors, specifically the Multi-cultivator. Notably, the culture exposed to 240 µmol/m²/s exhibited the most rapid cell growth, surpassing even the cell concentration achieved at 180 µmol/m²/s by day 8. A detailed analysis of the specific irradiance rate over time unequivocally revealed a sharp decline in growth rates when the rate fell below 2 × 10^-10 µmol/cell/s. Although the culture with 60 µmol/m²/s yielded the highest carotenoid content (1.2% of dry weight), the culture exposed to 240 µmol/m²/s recorded the highest carotenoid concentration at 8.9 mg/L owing to its higher biomass. Our findings reveal the critical importance of maintaining a specific irradiance rate above 2 × 10^-10 µmol/cell/s to enhance biomass and carotenoid productivity. This study lays the groundwork for defining optimal light intensity conditions applicable to mass culture systems, with the objective of augmenting C. reinhardtii biomass and optimizing carotenoid productivity.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.264-268
• /
• 2017

In the 21st century, information and communication technology (ICT) worldwide presents a new vision for agriculture. Time and place, as well as the high-tech industry, to overcome barriers to the fusion of the so-called "smart agriculture," are changing the agricultural landscape. Core container production in precision agriculture for mushroom cultivation, optimal temperature, humidity, irradiation, self-regulation of factors such as carbon dioxide, and environment for mushroom cultivation were adopted. Lentinula edodes (shiitake) is an edible mushroom native to East Asia, cultivated and consumed in many Asian countries. It is considered to be medicinal in certain practices of traditional medicine. We used different controlled light sources (Blue-Red-White-combined LED, blue LED, red LED, and fluorescent light) with different LED radiation intensities (1.5, 10.5, and $20.5{\mu}mol/m^2s$ for LEDs) to compare growth and development. Mushrooms were treated with light in a 12-hour-on/12-hour-off cycle, and maintained in a controlled room at $19{\sim}21^{\circ}C$, with 80~90% humidity, and an atmospheric $CO_2$ concentration of 1,000 ppm for 30 days. Growth and development differed with the LED source color and LED radiation intensity. Growth and development were the highest at $10.5{\mu}mol/m^2s$ of blue LED light. After harvesting the fruit bodies, we measured their weight and length, thickness of pileus and stipe, chromaticity, and hardness. The $10.5{\mu}mol/m^2s$ blue-LED-irradiated group showed the best harvest results with an average individual weight of 39.82 g and length of 64.03 mm, pileus thickness of 30.85 mm and pileus length of 43.22 mm, and stipe thickness of 16.96 mm with fine chromaticity and hardness. These results showed that blue LED light at $10.5{\mu}mol/m^2s$ s exerted the best effect on the growth and development of L. edodes (shiitake) mushroom in the ICT-system container-type environment.

• Korean Journal of Food Science and Technology
• /
• v.3 no.1
• /
• pp.37-43
• /
• 1971

(1) Relatively active polyphenol oxidase influence was seen at $0{\circ}C$, and the optimal pH level for the enzyme from the seeds of a small type sweet pepper Zairaisisi is 6.5. (2) The starting stage of the brown coloration with low-temperature injuries showed a strong activity of polyphenol oxidase, and the activity drops to 0 as the entire seed became brownish. (3) The browning effect with enzyme solution of polyphenol extracts suggested that the brown coloration continues in vitro even if polyphenol oxidase activity is nil. (4) Although cytochrome oxidase activity dropped when an abnormality occurrs in electron pathways of respiration at the starting stage of the browning with low temperature injuries, there was no marked influence of it on the total respiration, indicating the fact that polyphenol oxidase can take place of terminal oxidase in the compensatory respiration process.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.277-292
• /
• 2017

The development impact fee (DIF) zoning is a very beneficial public tool to provide the pre-planned urban infrastructures in those areas where significant urban sprawl had already taken place. In order to guarantee its benefit, however, it is required to designate the zone boundaries accurately and consistently. This study, in this context, tries to test the validity of the 50m-grid suggested in the official DIF manual, and to compare an alternative Hot Spot Analysis tool with the existing Spatial Aggregation method in configuring the zone boundaries. The results indicate that, unlike the case of population growth rate, current 50m grid size could not be much adequate in the case of using the development-permit increase rate to configure the primary DIF zones. Also, the optimal grid sizes seem to differ in the cases of Spatial Aggregation and Hot Spot Analysis. Further extended studies, in this regard, seem necessary to check the validity of the existing grid-size criteria as well as the boundary configuration methods.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.40-51
• /
• 2015

This study is to estimate the viability of aerobic stabilization technology for reducing greenhouse gas (GHG) emissions from landfills in Korea. In this study, methane emissions were estimated by applying Landfill gas estimation model (LandGEM) to Y landfill in Korea. By comparison of an anaerobic condition (baseline) and an aerobic condition, the amount of $CO_2eq$ savings was calculated. The $CO_2eq$ savings take place inside the landfilled waste during aeration due to the conversion of previously anaerobic biodegradation to aerobic processes, releasing mainly $CO_2$. It was demonstrated that 86.6% of the total GHG emissions occurring under anaerobic conditions could be reduced by aerobic stabilization technology. This means the aerobic stabilization technology could reduce environmental contamination through early stabilization and GHG emissions considerably at the same time. Therefore, the aerobic stabilization technology is one of the optimal technologies that could be employed to domestic landfill sites to achieve sustainable landfill.

• Advanced Industrial SCIence
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2023

Since silicone rubber heaters are flexible, they can be directly attached or installed in objects to be heated even in flat, curved or three-dimensional shapes. Since the current heating method heats the entire object to be heated and raises it to a required temperature, ignoring areas or positions where heat is not required, partial intensive heating cannot be performed. When using multi-heating zones, rather than heating the entire object to be heated, only the parts that need heat are intensively heated according to the process, so it is possible to heat quickly by local location by applying different amounts of heat with a small amount of electric capacity to each place that needs heat, and heat energy can reduce. In this study, the temperature and heating time of the partially concentrated region in the multi-heating region structure are measured so that a uniform temperature or temperature difference occurs in the region requiring thermal fusion. In order to determine the optimal power density range and reduce capacitance, the safety of a silicon rubber heater manufactured with a multi-heating zone structure is investigated. If the silicon rubber heater is manufactured in a multi-heating method, the multi-intensive heating technology can be ideally applied to all heating processes.