• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.922-930
• /
• 2009

유도 전동기를 전압 제어하기 위한 최적 PWM 스위칭 방법을 제시하려한다. 전압 인버터의 공간 벡터 변조 방식은 DC-버스 이용을 향상시키고 정류 손실을 감소시키기 때문에 디지털 구현의 경우 특히 선호하는 PWM 방법이다. 유도 전동기 전압 제어를 위한 최적 PWM 스위칭 방법은 제시한 최적 PWM 알고리즘을 사용하여 두 개의 활성 전압 벡터(active voltage vector)와 하나의 영 전압 벡터(zero voltage vector)로 구성하였다. 선택된 스위칭 순차 열은 변조 지수(modulation index)와 운송파(carrier wave) 주기의 함수로 정의 된다. 순차 열은 인버터 스위칭 손실과 전류 리플 값을 기준으로 사용하여 선택된다. 실험 결과 중 저 전력용으로 사용할 경우 스위칭 주파수를 증가시킴에 따라 고조파 왜곡이 감소하고 동특성이 좋아짐을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제22권6호
• /
• pp.453-462
• /
• 2016

This paper proposes a torque control method for surface mounted permanent magnetic synchronous motor (PMSM) driven by a 2-level voltage source driven inverter, which has fast torque response and small torque ripple. The proposed torque control method follows the finite control set model predictive control (FCS-MPC) strategy. A reference state is derived at each time step for the given time varying torque reference and the cost index is defined so that the tracking error for this reference state should be penalized. The choice of an optimal output voltage vector is made first from the 6 possible active voltage vectors of the 2-level voltage source inverter. Then a modulation factor for the chosen optimal voltage vector is obtained so that the torque ripple can be reduced further. It is shown that the proposed FCS-MPC control method yields fast torque tracking response and small torque ripple through simulation and experiments.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.163-172
• /
• 2016

The modular multilevel converter (MMC) has been receiving increased attentions in recent years. The new modular multilevel converter is a derivative topology from the traditional MMC in which the number of sub-modules (SMs) necessitated by each phase can be reduced by one. This paper presents a phase-shifted carrier pulse-width modulation (PSC-PWM) for the new MMC with an optimal phase-shifted angle to suppress the harmonics of the output voltage. Further, the harmonic features when the capacitor voltage of the middle SM is selected as two different values are also investigated. Moreover, in order to avoid introducing an unnecessary dc offset current at the ac terminals of the new MMC, a novel capacitor voltage balancing scheme is proposed by adjusting the amplitude of the reference signals rather than the offset. Finally, the validity and effectiveness of the proposed modulation and balancing schemes have been verified by experimental results based on a three-phase prototype of the new MMC.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.168-178
• /
• 2019

Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.554-557
• /
• 1993

The error analysis for the Time-in-Flight Laser Range Finder with Multiple Tone Amplitude Modulation relevant to the phase detection error is made. The distance can be estimated to solve the formulate which express the relationship between the absolute distance from the range finder to the object and the wavenumbers and the phases of the modulated waves by the optimization technique. The main cause of the estimation error can be considered as the phase detection error induced from the amplitude modulator and the phase detector. To clarify the phase detection error and the optimal amplitude frequency set, the numerical analysis are made.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.264-269
• /
• 2014

We consider transmission over body area networks. Due to the difficulty in assessing an accurate statistical model valid for multiple scenarios, we advocate a system design technique favoring robustness. Our approach, which is based on results in [12] and generalizes them, examines the variation of a performance metric when the nominal statistical distribution of fading is replaced by the worst distribution within a given Kullback-Leibler divergence from it. The sensitivity of the performance metric to the divergence from the nominal distribution can be used as an indication of the design robustness. This concept is applied by evaluating the error probability of binary uncoded modulation and the outage probability-the first parameter is useful to assess system performance with no error-control coding, while the second reflects the performance when a near-optimal code is used. The usefulness of channel coding can be assessed by comparing its robustness with that of uncoded transmission.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.77-83
• /
• 2012

In this paper, an optimal solution to the harmonic reduction problem in a cascaded multilevel inverter with non-equal DC sources using a genetic algorithm (GA) is presented. Switching angles are generated for different values of modulation index by the proposed algorithm, considering minimum voltage total harmonic distortion (THD) whereas selected harmonics are controlled within the allowable limits at all desired modulation indices including the point of discontinuity. Results are stored as a look-up table to be used to control the inverter for a certain operating point. The computed angles are used in a simulated circuit in Matlab\Simulink to validate the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.583-585
• /
• 1994

In this study, we have evaluated the effect of amplitude and frequency perturbation of EGG signal during single vowels associated with laryngeal pathology. The normal EGG signal is properly characterized by an autoregressive model which has the optimal order of ninth using the parametric method. This can be analyzed by determining the transfer function. Perturbations in the fundamental pitch and in the peak amplitude of EGG signal derived with a four-electrode system using the modulation/demodulation techniques were investigated for the purpose of developing a decision criteria for the laryngeal function identification.

• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.386-398
• /
• 1987

本 論文은 PWM(Pulse Width Modulation)인버어터의 스위칭作用에 의해서 發生하는 高周波 影響을 最小化하기 위한 Suboptimal PAWM(Pulse Amplitude Width Modulation)을 提示하였다. 本 方式은 Suboptimal PWM에서 THD(Total Harmonic Distorition)가 最小가 되는 固定點(基本波 電壓 u1=1.2)에서 하나의 스위칭패턴을 決定하였다. 그리고 電壓은 DC Link에서 DC Chopper에 의해 制御하게 하고 인버어터에서는 단지 高周波만을 制御하도록 하였다. 本 方式은 3相 誘導電動機의 VSD(Variable Speed Drive)에 適用하여 電動機의 騷音, 인버어터의 線間電壓 및 電流, 電流高周波 스펙트럼을 測定하였으며, 他 方式과 比較해 보았다. 그 結果로부터 本 方式의 妥當性을 立證할 수 있었다.