• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.10-19
• /
• 2012

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1148-1155
• /
• 2003

The finite element method is one of the methods widely applied for predicting vibration in mechanical structures. In this paper, the effect of the mesh size of the finite element model on the accuracy of the numerical solutions of the structural vibration problems is investigated with particular focus on obtaining the optimal mesh size with respect to the solution accuracy and computational cost. The vibration response parameters of the natural frequency, modal density, and driving point mobility are discussed. For accurate driving point mobility calculation, the decay method is employed to experimentally determine the internal damping. A uniform plate simply supported at four corners is examined in detail, in which the response parameters are calculated by constructing finite element models with different mesh sizes. The accuracy of the finite element solutions of these parameters is evaluated by comparing with the analytical results as well as estimations based on the statistical energy analysis, or if not available, by testing the numerical convergence. As the mesh size becomes smaller than one quarter of the wavelength of the highest frequency of interest, the solution accuracy improvement is found to be negligible, while the computational cost rapidly increases. For mechanical structures, the finite element analysis with the mesh size of the order of quarter wavelength, combined with the use of the decay method for obtaining internal damping, is found to provide satisfactory predictions for vibration responses.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1264-1275
• /
• 2002

This paper is concerned with the investigation on the stability and convergence characteristics of the Crank-Nicolson-Galerkin scheme that is widely being employed for the numerical approximation of parabolic-type partial differential equations. Here, we present the theoretical analysis on its consistency and convergence, and we carry out the numerical experiments to examine the effect of the time-step size △t on the h- and P-convergence rates for various mesh sizes h and approximation orders P. We observed that the optimal convergence rates are achieved only when △t, h and P are chosen such that the total error is not affected by the oscillation behavior. In such case, △t is in linear relation with DOF, and furthermore its size depends on the singularity intensity of problems.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.22-29
• /
• 2005

A material cloud method, which is a new topology optimization method, is presented. In MCM, an optimal structure can be found out by manipulating sizes and positions of material clouds, which are lumps of material with specified properties. A numerical analysis for a specific distribution of material clouds is carried out using fixed background finite element mesh. Optimal material distribution can be element-wisely extracted from material clouds' distribution. In MCM, an expansion-reduction procedure of design domain for finding out better optimal solution can be naturally realized. Also the convergence of material distribution is faster and well-defined material distribution with fewer intermediate densities can be obtained. In addition, the control of minimum-member sizes in the material distribution can be realized to some extent. In this paper, basic concept of MCM is introduced, and formulation and optimization results of MCM are compared with those of the traditional density distribution method(DDM).

• 한국정보과학회논문지:시스템및이론
• /
• 제36권5호
• /
• pp.335-343
• /
• 2009

교차큐브는 병렬처리 시스템의 상호연결망으로서 널리 알려진 하이퍼큐브와 많은 면에서 비슷하면서도 절반 정도의 지름을 가지는 등 개선된 망 성질들을 가지므로 각광 받아 왔다. 크기 $4{\times}2^m$인 메쉬의 복사본 두 개, 혹은 크기 $8{\times}2^m$인 메쉬의 복사본 네 개가 교차큐브에 연장율 1, 확장율 1로 임베딩 될 수 있음이 알려져 있다.[Dong, Yang, Zhao, and Tang, 2008]. 그러나 양변의 길이가 모두 8 보다 큰 메쉬 다수 개가 교차큐브에 연장율 1, 확장율 1로 임베딩될 수 있는지는 알려진 바가 없다. 이 논문에서는 크기 $2^n{\times}2^m$인 메쉬의 복사본 $2^{n-1}$개가 교차큐브에 연장율 1, 확장율 1로 임베딩될 수 있음을 보인다. $n{\geq}1$, $m{\geq}3$. 이 연구 결과는 연장율과 확장율이라는 주요 임베딩 측정 척도에서 최적이다. 또한 이 연구 결과는 메쉬 구조를 가지는 다수 개의 작업을 교차큐브 구조를 가지는 병렬 컴퓨터에 할당하는데 효과적으로 활용될 수 있다.

• 수산해양기술연구
• /
• 제49권4호
• /
• pp.360-367
• /
• 2013

The mesh selectivity of the gillnet for Pacific herring (Clupea pallasii) was examined in field experiments with four different mesh sizes (63, 69, 75 and 81mm) from June to July, 2013 in the coastal areas of Imwon in Gangwon province. The fishing performance tests were conducted with a commercial Pacific herring gillnet and a biodegradable gillnet for Pacific herring together selectivity tests. The filed tests were carried out the total 11 times. The master curve of selectivity was estimated by the extended Kitahara's method. In the results, the catch number of Pacific herring was 9,409 (2,203kg) and occupied 84.2% in total catches weight. The optimal mesh size for 50% retention on first maturity size (female, 250mm) of Pacific herring was estimated as 64.5mm by master selectivity curves. The fishing performance of the biodegradable gillnet was showed to be equivalent with commercial gill for Pacific herring.

• 소성∙가공
• /
• 제15권6호
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.3-12
• /
• 2003

폐 탄탈륨 콘덴서에 함유된 탄탈륨 anode를 물리적인 방법으로 회수하고자 파쇄, 입도분리, 건식 자력선별 그리고 공기 분급 실험을 수행하였다. 단체분리를 위해 롤 크럿셔를 사용하여 폐회로 공정에서 8mesh 이하로 파쇄하면. 대부분의 탄탈륨 anode는 레진과의 단체분리는 이루어지나 일부 금속과의 단체분리가 되지 않은 상태로 남게된다. 파쇄된 시료를 8/10 mesh, 10/18 mesh, -18 mesh 로 분립한 결과, 금속물질은 8/10 mesh 입자에, 탄탈륨 anode는 +18 mesh에 주로 분포하며, -l8 mesh에는 레진의 함량이 71.5％로 레진이 탄탈륨 anode나 금속물질보다 미립화가 쉽게 이루어짐을 알 수 있었다. 자력선별에 의한 금속 물질의 분리효율은 원료의 입도에 따라 크게 차이가 있으나, 일부 금속물질이 약자성체이거나 탄탈륨anode와 단체분리가 이루어지지 않아 금속물질 제거율은 62.3%로 비교적 저조하였다. 탄탈륨 anode와 레진의 분리를 위한 입도별 공기 분급실험 결과, 각 입도별 최적 공기량은 각각 39㎥/h, 32㎥/h, 20㎥/h로 나타났다. 최적의 조건으로 회수한 탄탈륨 anode 생산율은 49.39wt.％, 각 성분의 함량은 97.47wt.% 탄탈륨 anode, 0.93wt.％ 레진. 1.51 wt.％ 금속으로 탄탈륨 anode 실수율은 94.45％이었다.