• Journal of Communications and Networks
• /
• 제14권6호
• /
• pp.662-671
• /
• 2012

Plug-in hybrid electric vehicles (PHEVs) will be widely used in future transportation systems to reduce oil fuel consumption. Therefore, the electrical energy demand will be increased due to the charging of a large number of vehicles. Without intelligent control strategies, the charging process can easily overload the electricity grid at peak hours. In this paper, we consider a smart charging and discharging process for multiple PHEVs in a building's garage to optimize the energy consumption profile of the building. We formulate a centralized optimization problem in which the building controller or planner aims to minimize the square Euclidean distance between the instantaneous energy demand and the average demand of the building by controlling the charging and discharging schedules of PHEVs (or 'users'). The PHEVs' batteries will be charged during low-demand periods and discharged during high-demand periods in order to reduce the peak load of the building. In a decentralized system, we design an energy cost-sharing model and apply a non-cooperative approach to formulate an energy charging and discharging scheduling game, in which the players are the users, their strategies are the battery charging and discharging schedules, and the utility function of each user is defined as the negative total energy payment to the building. Based on the game theory setup, we also propose a distributed algorithm in which each PHEV independently selects its best strategy to maximize the utility function. The PHEVs update the building planner with their energy charging and discharging schedules. We also show that the PHEV owners will have an incentive to participate in the energy charging and discharging game. Simulation results verify that the proposed distributed algorithm will minimize the peak load and the total energy cost simultaneously.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.435-442
• /
• 2011

In an attempt to respond to the increase in international oil prices and reduce operating expenses, ship remodeling was carried out on a 740ton class tuna purse seiner. To strengthen the competitiveness of the fisheries industry by improving vessel performance, a bulbous bow was newly equipped. The slipway and rudder area were also lengthened and enlarged with the propeller and main engine remained unchanged. To reduce the hull resistance, a circle type bulbous bow was attached on the hull behind bow thruster and thus the cost for exchanging electrical equipment for bow thruster was reduced. The new rudder area was expanded 15% more than the old one within the extent that the existing mechanical control part and rudder stock were not changed. To prevent fishing net damage and stabilize wake field, slipway was lengthened to the optimal position. All of the new design of remodeling parts went through the model tests in towing tank and CWC. Besides resistance test, all of necessary model test results were delivered for hydrodynamic character for the modified ship. The maneuvering simulation to verify that the remodeled ship satisfies the IMO rules was performed in both zigzag and turning tests. The estimated resistance with new bulbous bow and lengthened stern was reduced by 4.8% in the 2-dimensional analysis and 17.4% in the 3-dimensional analysis in comparison of conventional ship. The average reduction of resistance was estimated about 10%. Maneuvering character of modified hull form was found to satisfy all regulations under IMO. The remodeling of tuna purse seiner can not only improve fishing performance but also contribute to reduction of operating cost by saving energy for the fisheries industry.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.513-520
• /
• 2004

A steady-state/transient performance simulation model was newly developed for the propulsion system of the CRW (Canard Rotor Wing) type UAV (Unmanned Aerial Vehicle) during flight mode transition. The CRW type UAV has a new concept RPV (Remotely Piloted Vehicle) which can fly at two flight modes such as the take-off/landing and low speed forward flight mode using the rotary wing driven by engine bypass exhaust gas and the high speed forward flight mode using the stopped wing and main engine thrust. The propulsion system of the CRW type UAV consists of the main engine system and the duct system. The flight vehicle may generally select a proper type and specific engine with acceptable thrust level to meet the flight mission in the propulsion system design phase. In this study, a turbojet engine with one spool was selected by decision of the vehicle system designer, and the duct system is composed of main duct, rotor duct, master valve, rotor tip-jet nozzles, and variable area main nozzle. In order to establish the safe flight mode transition region of the propulsion system, steady-state and transient performance simulation should be needed. Using this simulation model, the optimal fuel flow schedules were obtained to keep the proper surge margin and the turbine inlet temperature limitation through steady-state and transient performance estimation. Furthermore, these analysis results will be used to the control optimization of the propulsion system, later. In the transient performance model, ICV (Inter-Component Volume) model was used. The performance analysis using the developed models was performed at various flight conditions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the turbine inlet temperature overshoot limitation as well as the compressor surge margin. Because the engine performance simulation results without the duct system were well agreed with the engine manufacturer's data and the analysis results using a commercial program, it was confirmed that the validity of the proposed performance model was verified. However, the propulsion system performance model including the duct system will be compared with experimental measuring data, later.

• 한국인터넷방송통신학회논문지
• /
• 제21권4호
• /
• pp.117-122
• /
• 2021

영구자석 동기전동기는 높은 출력밀도와 효율 확보가 가능하나, 제작에 필요한 재료의 가격이 비싸고 설계가 유도전동기 대비 다소 어려운 문제점을 가지고 있다. 따라서 효율 및 유지보수 편의성 등이 모두 고려된 최적의 전동기 개발 및 관련 제어연구가 필요한 실정이다. 뿐만 아니라, 실질적인 전동기에 의한 구동은 좁은 정격영역에서의 최고효율의 증대 요구와 전체 전기구동 영역에서의 평균 효율 증대, 평균 출력의 증대 요구로 이어지고 있다. 이러한 움직임에 의해 영구자석이 필요 없는 릴럭턴스 전동기 (Reluctance Motor)가 하나의 대안으로 검토되고 있다. 본 논문에서는 희토류 영구자석 전동기를 대체할 수 있는 미래기술 개발과, 희토류 저감형 전동기와 탈 희토류 전동기의 기술 선점을 요구하는 시대적 이슈 (Issue)에 맞춰 영구자석이 필요 없는 스위치드 릴럭턴스 전동기 (Switched Reluvtance Motor, SRM)에 대해 기계언어(C 언어)를 통한 modeling과 그에 따른 SRM의 특성을 연구하고자 한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.69-72
• /
• 2022

This paper actually investigates the load on major large-scale buildings in the downtown area, examines the economic feasibility of installing PV and ESS in a microgrid target building, and evaluates whether an electric vehicle capable of V2G through two buildings is effective as an economical analysis program (HOMER) was analyzed using. It is economical to install a mixture of ESS rather than using the whole PV, and it is shown that if there is an electric vehicle using the V2G function of EV, there is an economic effect to replace the PV. So that Incentives and policies are needed to replace a large area of PV and utilize the existing parking lot to lead EV as a resource of the microgrid. Currently, P2X technology that stores power as ESS or converts it to other energy to control when surplus renewable energy occurs in large-capacity solar power plants and wind farms, etc. This is being applied, and efforts are being made to maintain the stability of the system through the management of surplus power, such as replacing thermal energy through a heat pump. Due to the increase in electric vehicles, which were recognized only as a means of transportation, technologies for using electric vehicles are developing. Accordingly, existing gas stations do not only supply traditional chemical fuels, but electricity, and super stations that also produce electricity have appeared. Super Station is a new concept power plant that can produce and store electricity using solar power, ESS, V2G, and P2G. To take advantage of this, research on an urban microgrid that forms an independent system by tying a large building and several buildings together and supplies power through a super station around the microgrid is in full swing.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.226-241
• /
• 2014

This study proposes schemes of GIS-based system development for integrated information management in water environment linked with Korean Reach File (KRF). For this purpose, precedent studies and systems of the U.S. were investigated and analyzed to induce optimal methodology for Korean circumstances. Thereafter, data linkage methods of KRF and Water Environment Information System (WEIS), system configuration plans, application development plans, and KRF improvement and maintenance plans were considered. For data linkage and system configuration, three methods were suggested: an overlay operation-based data linkage method, entering spatial addresses into the existing DB, and creating link information between KRF and the existing DB. The first method was predicted to be the most effective for system implementation, the second method is advantageous for search tasks, and the third method is advantageous for system security and maintenance. Various types of applications should be developed in the consideration of the types of the users and their usages. Moreover, there is a need for further research on regular renewal of KRF, standard development, expansion of construction areas, etc. Based on the present results, research on actual system design and development also should be conducted for supporting Total Maximum Daily Loads (TMDLs).

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.141-151
• /
• 2020

The aim of this study was to analyze the safety factor of range-shift gear pairs on multi-purpose agricultural implement machinery for an optimal design of a transmission system. Gear-strengths such as bending and contact stress and safety factors were analyzed under three load conditions: an equivalent engine torque at plow tillage, a rated engine torque, and the maximum engine torque. Root and contact safety factor were calculated to be 3.88, 5.14, 2.24, 2.11, 2.21, 0.99 and 0.78, 0.94, 0.65, 0.68, 0.84, 0.85, respectively, under equivalent engine torque condition at the plow tillage. The root and contact safety factor were calculated to be 1.91, 2.53, 1.10, 1.04, 1.07, 0.48 and 0.55, 0.66, 0.46, 0.48, 0.59, 0.59, respectively, under rated engine torque condition. The root and contact safety factor were calculated to be 1.60, 2.11, 0.92, 0.87, 0.90, 0.40 and 0.51, 0.61, 0.42, 0.44, 0.54, 0.54, respectively, under the maximum engine torque condition. The multi-purpose agricultural implement machinery could be conducted under plow tillage operation. However, gear specifications for tooth surface need modification because the gear surface would be broken at all driving conditions as safety factors are lower than 1.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.26-35
• /
• 2013

Outbreak of animal infectious diseases such as foot-and-mouth disease, avian influenza are becoming prevalent worldwide. For prevent the further infection, tremendous numbers of the infected or culled stocks are buried around farm. This burial method can generate a wide range of detrimental components such as leachate, nutrient, salt, and pathogenic bacteria, consequently. In this study, for the stabilization of livestock carcasses leachate, advanced oxidation processes utilizing the Fenton reaction was investigated in lab-scale experiments for the treatment for $COD_{Cr}$ of livestock carcass leachate. $COD_{Cr}$ reduction by the Fenton oxidation was investigated response surface methodology using the Box-Begnken methods were applied to the experimental results. A central composite design was used to investigate the effects of the independent variables of pH ($x_1$), dosage of $FeCl_2{\cdot}4H_2O$ ($x_2$) and dosage of $H_2O_2$ ($x_3$) on the dependent variables $COD_{Cr}$ concentration ($y_1$). A 1 M NaOH and $H_2SO_4$ was using for pH control, $FeCl_2{\cdot}4H_2O$ was used as iron catalyst and NaOH was used for Fenton reaction. The optimal conditions for Fenton oxidation process were determined: pH, dosage of $FeCl_2{\cdot}4H_2O$ and dosage of $H_2O_2$ were 3, 0.6 g (0.0151 M) and 7 mL(0.259 M), respectively. Statistical results showed the order of significance of the independent variables to be pH > initial concentration of ferrous ion > initial concentration of hydrogen peroxide.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1097-1103
• /
• 2012

우리나라의 서남해안은 어류의 양식 어가가 많이 있다. 양식 어가의 양식장은 해수를 유입시켜 순환시키는 기본적인 특성에 기인하는 관계로 약간의 부주의 및 잘못된 설계는 양식어의 폐사에 까지 영향을 끼치며, 또한 어종별로 최적의 서식온도가 존재함이 이미 밝혀져 있으며 이러한 환경을 사계절에 무관하게 유지하기는 극히 힘든 일인 동시에 필수적 과제이다. 이 논문에서는 열의 기본 성질과 열전달 메커니즘에 대하여 연구하였고, 이를 바탕으로 일정한 격리된 공간에 열을 축적하기 위해 샌드위치 판넬 단열재를 이용하여 밑이 트인 단열 수조를 설계 및 제작을 하고 모의실험을 하였다. 이를 바탕으로 무한히 많은 물중에서 일정 구획을 단열재로 단열하고, 밑이 트인 단열 수조에 히터를 장치하여 국부적인 부분만 가열하여 일정온도를 유지하는 것이 가능함을 확인하였다. 또한 마이크로프로세서를 통하여 온도를 검출하기 위한 온도제어기를 제작하였으며, 일정한 온도 값을 유지하기 위한 AC 전력 제어기를 제작하여 히터의 발열량 제어가 가능한 시스템을 구현하였다.

• 정보처리학회논문지C
• /
• 제8C권1호
• /
• pp.75-87
• /
• 2001

이 논문에서는 제한수신시스템의 일반구조 및 암/복호화에 사용되는 키의 안정성을 위한 키관리 메카니즘 그리고 시스템 성능 향상을 위한 키 계층 구조의 개선에 대해서 살펴본다. 또한 시스템 성능 분석을 위한 기본 개념으로 큐잉 이론(queuing theory)을 설명하고, 디지털 방송 유료화 서비스의 실현 및 시스템 성능 향상을 위한 시스템 최적화 방안으로서 몇 가지 산정된 자료를 기초로 하여 최적의 키 생성 및 전달 주기, 최적의 키관리 주기에 따른 최대/최소 키 전달 시간, 과금 데이터처리를 위한 전용선의 용량 및 시스템 용량을 산정 한다.