Acknowledgement
본 논문은 2019년 충남대학교 해외파견 연구비 지원에 의한 결과입니다.
References
- D. J. Kim et al., 'Development of HSU and Transmission Control Technology for Continuously Variable transmission of Tractor and Forklift,'' Journal of Drive and Control Vol.15, No.1, pp.51-60, 2018.
- N. G. Lee et al., 'A Study on the Improvement of Transmission Error and Tooth Load Distribution using Micro-geometry of Compound Planetary Gear Reducer for Tractor Final Driving Shaft,' Jouanl of Drive Control Vol.17, No.1, pp.1-12, 2020.
- D. S. Jung et al., 'Study of Test for and Evaluation of HMT for a Tractor,' Journal of Applied Reliability Vol.19, No.3, pp.275-283, 2019 https://doi.org/10.33162/JAR.2019.09.19.3.275
- KAMICO, KSAM, 'Agricultural Machinery Yearbook Republic of Korea,' Korea Agricultural Machinery Industry Cooperation, 2019.
- Y. J. Kim et al., ''Evaluation of Tractor PTO Severeness during Rotary Tillage Operation,'' Journal of Biosystems Engineering Vol.36, No.3, pp.163-170, 2011. https://doi.org/10.5307/JBE.2011.36.3.163
- D. C. Kim, Y. S. Kang, ''Case Study if Accelerated Life Test Method for Agricultural Tractor Transmission,'' Journal of Biosystems Engineering Vol.34, No.5, pp.326-330, 2009.
- J. H. Kim et al., ''Severeness of Transmission Loads of Agricultural Tractor,'' Journal of Biosystems Engineering Vol.23, No.5, pp.417-426, 1999.
- W. S. Kim et al., ''Analysis of Power Requirement of 78 kW Class Agricultural Tractor According to the Major Field Operation,'' Transaction of the Korean Society of Mechanical Engineers A Vol.43, No.12, pp.911-922, 2019. https://doi.org/10.3795/KSME-A.2019.43.12.911
- W. S. Kim et al., ''Work Load Analysis for Determination of the Reduction Gear Eatio for a 78 kW all Wheel Drive Electric Tractor Design,'' Korean Journal of Agricultural Science Vol.43, No.3, pp.613-627, 2019.
- Y. J. Kim et al., ''Analysis of Power Requirement of Agricultural Tractor during Baler Operation,'' Journal of Biosystems Engineering Vol.36, No.4, pp.243-251, 2011. https://doi.org/10.5307/JBE.2011.36.4.243
- M. G. Kong, C. K. Song, Y. D. Kim, ''Strength Design Evaluation of the Multi-range Transmission,'' Journal of the Korea Society for Power System Engineering Vol.15, No.3, pp.12-17, 2011. https://doi.org/10.9726/kspse.2011.15.3.012
- T. J. Kim et al., ''Strength Analysis of Mechanical Transmission using Equivalent Torque of Plow Tillage of an 82 kW-class tractor,'' Korean Journal of Agricultural Science Vol.46, No.4, pp.723-735, 2019.
- S. M. Baek et al., ''Design of the Hydro-Mechanical Transmission for a 55 kW-Class Agricultural Tractor,'' Journal of Drive and Control Vol.17, No.2, pp.19-27, 2020. https://doi.org/10.7839/KSFC.2020.17.2.019
- J. H. Jang et al., ''Effects of PTO Gear Face Width on Safety Factors,'' Korean Journal of Agricultural Science Vol.43, No.4, pp.650-655, 2016. https://doi.org/10.7744/kjoas.20160068
- S. J. Hong et al., ''Analysis of the Axle Load of an Agricultural Tractor during Plow Tillage and Harrowing,'' Korean Journal of Agricultural Science Vol.43, No.4, pp.665-669, 2016. https://doi.org/10.7744/kjoas.20160087
- J. M. Serrano et al., ''Tractor Energy Requirements in disc Harrow Systems,'' Biosystems Engineering Vol.98, pp.286-296, 2007. https://doi.org/10.1016/j.biosystemseng.2007.08.002
- S. U. Park, ''Fatigue Life Evaluation of Spiral Bevel Gear of Transmission using Agricultural Workload of Tractor,'' Ph.D, Dissertation, Chungnam National University, Korea, 2019.
- ISO(International Organization for Standardization), ''Calculation of Load Capacity of Spur and Helical Gears - Part 6:Calculation of Service Life under Variable Load'', In ISO 6336-6:2010.
- D. H. Lee, ''Analysis of Power Requirements of Tractor for Field Operation,'' Master, Dissertation, Sungkyunkwan University, Suwon, Korea, 2011.
- ISO(International Organization for Standardization), ''Calculation of Load Capacity of Spur and Helical Gears - Part 1:Basic Principles, Introduction and General Influence Factors'', In ISO 6336-1:2015.
- P. U. Lee et al., ''Load Capacity Simulation of an Agricultural Gear Reducer by Surface Heat Treatment,'' Korean Journal of Agricultural Science Vol.43, No. 4, pp.656-664, 2016. https://doi.org/10.7744/kjoas.20160069
- U. G. Jeong, ''Durability Verification of Gears in the Multi-range Transmission using Cumulative Damage rule,'' Ph.D. Dissertation, Gyeongsang National University, Jinju, Korea, 2013.
- ISO(International Organization for Standardization), ''Calculation of Load Capacity of Spur and Helical Gears - Part 3:Calculation of Tooth Bending Strength'', In ISO 6336-3:2015.
- ISO(International Organization for Standardization), ''Calculation of Load Capacity of Spur and Helical Gears - Part 2:Calculation of Surface Durability (pitting)'', In ISO 6336-2:2015.