• Korean Journal of Microbiology
• /
• v.29 no.6
• /
• pp.387-391
• /
• 1991

Methylobacterium extorquens AM1 growing on methanol as a sole source of carbon and energy was found to grow most rapidly (t$t_{d}$ =6h) at 30.deg.C in a mineral medium (pH 7.0) containing 0.5% (v/v) methanol which was agitated at 200 rpm (optimal cultivation condition). Cells grown under the optimal cultivation condition contained more spermidine, but less putrescine, than the cells grown on 2.5%(v/v) ( $t_{d}$ =8h ) or at 20.deg.C ( $t_{d}$ =8h ). Cells cultivated under the optimal condition was found to contain more spermidine than the cells grown at pH 6.0 (( $t_{d}$ =7h ) and pH 8.0 ($t_{d}$ =7.3h). the cells growing at the stationary phase under the optimal condition accumulated more spermine or putrescine than the cells growing at the same phase on 2.5%(v/v) methanol or at pH 6.0 and pH 8.0, respectively. M. extorquens AM1 grown in a medium agitated at 100 rpm ( $t_{d}$ =8.8h ) contained less spermidine and spermine than the cells grown under the optimal cultivation condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.59-64
• /
• 2006

High Speed Machining(HSM) reduces machining time and improves surface accuracy because of the high cutting speed and feedrate. Development of HSM makes it allowable to machine difficult-to-cut material and use small-size-endmill. It is however limited to cutting condition and tool material. In the machining operation, it is important to check main parameter of tool life and select optimal cutting condition because tool breakage can interrupt progression of operation. In this study, cutting parameters are determined to 3 factors and 3 levels which are a spindle speed, a feedrate and a width of cut. Experiment is designed to orthogonal array table for L9 with 3 outer array using Taguchi method. Also, it is proposed to inspect significance of the optimal factors and levels by ANOVA using average of SN ratio for tool life. Finally, estimated value of SN ratio in the optimal cutting condition is compared with measured one in the floor shop and reduction of loss is predicted.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.37-41
• /
• 1990

The quality of cutting surface such as surface roughness, heat affected zone, serf width can be improved by controlling the parameters of cuting process. These parameters includes cutting velocity, laser beam power, material depth and assistant gas. Thermodynamic analysis and systematical experiments are attempted to pedict and determine the optimal cutting condition. There exists the optimal cutting condition to ensure high quality surface. Under this operation, the minimum surface roughness of the mild steel, the stainless steel and the titanium becomes 3.8${\mu}{\textrm}{m}$ 13${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$ respectively.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.4
• /
• pp.135-140
• /
• 2004

It considers advertising as an instrument to increase the stock of goodwill or reputation. summarising the effects of past and current advertising expenditures carried out by a firm. on the current demand for her goods. A relevant result emerging from the Dorfman-Steiner (1954) condition. establishing that advertising investment is proportional to sales. This paper investigates optimal advertising level between the good firm and the bad firm. So. We knew that between the good firm and the bad firm are establishing the Dorfman-Steiner condition.

• 전기의세계
• /
• v.19 no.2
• /
• pp.21-23
• /
• 1970

Necessary conditions of optimal distributed parameter control systems, Hamiltons coanonical equations, welerstress condition, transversality condition and boundary condition are obtained, when the control function is constrained and the performance index takes on the general form. Also it is concluded that the lumped parameter system is the special case of the distributed parameter system.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.68-71
• /
• 1989

This paper is to investigate the optimal condition of fabrication for glass-cloth/epoxy composite material. According to the result in this paper, in fabrication of composite materials, the optimal condition of treatment for epoxy silane coupling agent is 1.5% water solution of silane coupling agent by weight. Then, % weight ratio of silane coupling agent VS, glass cloth is about 0.3%. And the optimal post cured condition of glass cloth/epoxy composite material is about 30 hours at 100$^{\circ}C$.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.185-189
• /
• 2003

The purpose of this study is to obtain the optimal operating condition of conduction cooled taper shape high-temperature superconductor (HTS) current lead operated in current sharing mode. In our previous study, we discovered that the optimal operating condition of constant cross-section area HTS current lead is in the current sharing state, and in optimal condition, the temperature gradient at warm end is not zero. The analysis result of taper HTS current lead is quiet similar to the constant area HTS current lead. The minimum dissipation of taper HTS current lead is not influenced by taper angle, however the optimal operation condition is varied with taper angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4726-4731
• /
• 2011

This paper proposed the algorithm to select optimal grinding condition for plunge grinding in the batch production unit. In order to apply to the proposed algorithm, the state variable for plunge grinding process was defined and the optimal grinding condition for each cycle in batch production was decided by genetic algorithm. Based on the optimized grinding condition in each cycle, the optimal grinding condition for whole batch production was selected by dynamic programming. The proposed algorithm was evaluated by computer simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.9
• /
• pp.1325-1334
• /
• 1998

The objectives of the present study are to develop a systematic method rather than a conventional trial-and-error method for an optimal shape design using a mathematical theory, and to apply it to engineering problems. In the present study, an optimal condition for a minimum pressure loss in a two-dimensional curved duct flow is derived and then an optimal shape of the curved duct is designed from the optimal condition. In the design procedure, one needs to solve the adjoint Navier-Stokes equations which are derived from the Navier-Stokes equations and the cost function. Therefore, a computer code of solving both the Navier-Stokes and adjoint Navier-Stokes equations together with an automatic grid generation is developed. In a curved duct flow, flow separation occurs due to an adverse pressure gradient, resulting in an additional pressure loss. Optimal shapes of a curved duct are obtained at three different Reynolds numbers of 100, 300 and 800, respectively. In the optimally shaped curved ducts, the separation region does not exist or is significantly reduced, and thus the pressure loss along the curved duct is significantly reduced.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.109-125
• /
• 2004

This paper deals with an optimal process control problem in production of hull structural steel plate with high defective rate. The main quality characteristic(dependent variable) is the internal quality(defect) of plates and is dependent on process parameters(independent variables). The dependent variable(quality characteristics) has three categorical ordinal data and there are 35 independent variables(29 continuous variables and 6 categorical variables). In this paper, we determine the main factors and to develop the mathematical model between internal quality predicted probabilities and the main factors. Secondly, we find out the optimal process condition of main factors through analysis of variance(ANOVA) using simulation. We consider three models to obtain the main factors and the optimal process condition: linear, quadratic, error models.