• ETRI Journal
• /
• v.30 no.1
• /
• pp.81-88
• /
• 2008

The security threat posed by worms has steadily increased in recent years. This paper discusses the application of the optimal and sub-optimal Internet worm control via Pontryagin's maximum principle. To this end, a control variable representing the optimal treatment strategy for infectious hosts is introduced into the two-factor worm model. The numerical optimal control laws are implemented by the multiple shooting method and the sub-optimal solution is computed using genetic algorithms. Simulation results demonstrate the effectiveness of the proposed optimal and sub-optimal strategies. It also provides a theoretical interpretation of the practical experience that the maximum implementation of treatment in the early stage is critically important in controlling outbreaks of Internet worms. Furthermore, our results show that the proposed sub-optimal control can lead to performance close to the optimal control, but with much simpler strategies for long periods of time in practical use.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.250-256
• /
• 2005

This study was aimed to investigate treatment feasibility of leachate from D landfill that is located in gyr대ungbuk. From the analytical results of leachate, organic and nonbiodegradable matters were contained in high concentration. Thus chemical treatment was introduced to degrade nonbiodegradable matters in pre or post biological process. Two types of Fenton oxidation were adapted in this study. The first one is pre treatment process before biological treatment. The second one is post treatment process after biological treatment. The optimal conditions of both treatment methods were investigated as follows. In case of pre treatment process, the optimal conditions appeared in $Fe^{+2}/H_2O_2$(mmol/mmol): 0.1, $H_2O_2/CODcr$(mg/mg): 27.0, pH: 3 and reaction time: 2hrs. On the other hand, in case of post treatment process, the optimal conditions appeared in $Fe^{2+}$(mmol/mmol): 0.14, $H_2O_2/COD_{cr}$(mg/mg): 57.4, pH: 3 and reaction time: 1.25hrs. In the above optimal conditions, high COD removal was obtained in pre and post treatment process. Also it can expect that Fenton oxidation converted nonbiodegradable matters into biodegradable matters.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.73-82
• /
• 2000

This study was implemented to find an optimal model for wastewater treatment processes using PHOENICS(Parabolic, hyperbolic or Elliptic Numerical Integration Code Series) and ASM(Activated Sludge Model). PHOENICS is a general software based upon the laws of physics and chemistry which govern the motion of fluids, the stresses and strains in solids, heat flow, diffusion, and chemical reaction. The wastewater flow and removal efficiency of particle in two phase system of a grit chamber in wastewater treatment plant were analyzed to inquire the predictive aspect of the operational model. ASM was developed for a biokinetic model based upon material balance in complex activated sludge systems, which can demonstrate dynamic and spatial behavior of biological treatment system. This model was applied to aeration tank and settling chamber in Choonchun city, and the modeling result shows dynamic transport in aeration tank. PHOENCS and ASM could be contributed for the optimal operation of wastewater treatment plant.

• The Journal of Korean Medicine
• /
• v.39 no.4
• /
• pp.16-29
• /
• 2018

Introduction: We aimed to investigate the predictive factors and optimal age for response to herbal medicine treatment for height gain in children. Methods: This retrospective chart review included 61 children (age range, 5-16 years) treated for height gain between 2011 and 2015. A predictive model was established by multiple linear regression analysis. Dependent variables were defined by the differences in percentile before and after herbal medicine treatment. The optimal cutoff value of patient age was determined by receiver operating curve analysis. Results : The age of initiation of herbal medicine therapy (p = 0.012) and administration of Forsythiae fructus (p = 0.002) were significant variables for treatment response. The adjusted R2 value was 0.231. The mean ages of the responder and non-responder groups were significantly different (p = 0.023). The optimal cutoff value of age for predicting treatment response was 9.75 years. Treatment response was better among children below 9.75 years of age. Conclusions: Patient age and administration of Forsythiae fructus were identified as determinants of response to herbal medicine treatment. Treatment of rhinitis and initiation of height gain treatment at an early age are critical for better response. These findings will provide fundamental data for further research.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.85-90
• /
• 2005

The effect of sodium acetate to reduce the fiber damage and hardening of acetate fabrics during alkaline treatment is studied. The optimal condition is controlled concentration 2%, at $50^{\circ}C$ for 6 minutes and at $70^{\circ}C$ for 2 minutes through the result of weight loss, shrinkage and tensile strength. Alkaline treated acetate fabrics under optimal condition show softer than untreated acetate fabrics. Alkaline treatment with sodium acetate brings the reduction in hardening and shrinkage in internal fiber of acetate fabric. Also, alkaline treatment with sodium acetate improves the tensile strength of acetate fabrics compared with only alkaline treatment. The moisture regain of acetate fabrics is also improved by alkaline treatment under optimal condition.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.379-384
• /
• 2005

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.61-72
• /
• 2014

The aim of this study is to define the condition of optimal pre-treatment for preferable activated carbon fibers (ACFs), which are based on rayon fibers. This paper shows the ideal path of ACFs preparation process; implies that rayon fibers are pre-treated by various solvents with different times before the heating process. The pre-treated rayon fibers finally turned into desirable rayon fiber-based ACFs through optimal pre-treatment condition by heating processes. The thermal analysis method of pre-treated rayon fibers by thermo-gravimetry analyser (TGA) is an idealized tool, which analyzes the best thermal condition of pre-treatment process. Surface morphologies of resulting rayon fibers based ACFs were examined by scanning electron microscope(SEM). The results of TGA and SEM analyses show that the optimal pre-treatment condition for preparing ACFs was clearly defined, in terms of thermal stability and surface morphology.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.72-79
• /
• 2017

A full treatment of damping material is not an effective method because the damping effect is not significantly increased compared to that obtained by an effective partial damping treatment. Thus, a variety of methodologies has been considered in order to achieve an optimal damping treatment. One of the widely applied approaches is topology optimization. However, the high computational expenses can be an issue in topology optimization. A new efficient convergence criterion, reducible design variable method (RDVM), is applied to reduce computational expense in topology optimization. The idea of RDVM topology optimization is to adaptively reduce the number of design variables based on the history. The iteration repeats until the number of design variables becomes zero. The aim of this research is to adopt RDVM topology optimization into obtaining an optimal damping treatment. In order to demonstrate the effectiveness and efficiency of RDVM topology optimization, optimal damping layouts and computational expenses are compared between conventional and RDVM topology optimization.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.20-25
• /
• 2000

The wastewater treatment for the purpose of water-recycling was performed using Fenton's & ozone's methods. These methods were used to increase the treatment efficiency of textile wastewater and to search for the optimal operating conditions. The optimal conditions by Fenton process were determined so that input amounts of $FeSO_4{\cdot}7H_2O$ and $H_2O_2$ were $7.2mM/{\;}{\ell}$ and $49.0m/{\;}{\ell}$ respectively, treatment by ozone process had 92% removal efficiency at ozone concentration of 9.73g/min and $130mM/{\;}{\ell}$ of $H_2O_2$.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.61-61
• /
• 2022

For high quality bread wheat production in Korea, it is necessary to develop optimal nitrogen (N) fertilizer methods. For optimal N fertilizer, we evaluated the alteration of growth, yield, yield components and end-use qualities according to the treatment of N fertilizer amounts and timings at heading stages. Growth, yield, yield components, and end-use quality weren't altered by various timings of N fertilizer treatment conditions whereas, 1,000 grain weight and lodging degree was increased by increasing amounts of N fertilizer treatment conditions at 7 days after heading (7 DAH). Especially, lodging degree was significantly increased by 6kg/10a of N fertilizer treatment conditions at 7 DAH. The flour protein contents increased by various amounts of N fertilizer treatment conditions. However, SDS-sedimentation and bread loaf volumes were decreased by exceeding 6kg/10a of N fertilizer treatment conditions at 7 DAH. When considering the quality of bread, 6kg/10a N fertilizer treatment is best, but 3kg/10a N fertilizer treatment is more suitable for both quality and lodging at 7 DAH. Therefore, it is preferable to fertilize 3kg/10a of nitrogen at 7 DAH in addition to standard fertilizer when cultivate bread wheat.