• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.524-532
• /
• 2020

In this study, noise radiated from a high-speed fan-motor unit for a cordless vacuum cleaner is reduced by designing splitter blades on the existing impeller. First of all, in order to investigate the flow field through a fan-motor unit, especially impeller, the unsteady incompressible Reynolds-Averaged Navier-Stokes (RANS) equations are numerically solved by using computational fluid dynamic technique. With predicted flow field results as input, the Ffowcs Williams-Hawkings (FW-H) integral equation is solved to predict aerodynamic noise radiated from the impeller. The validity of the numerical methods is confirmed by comparing the predicted sound pressure spectrum with the measured one. Further analysis of the predicted flow field shows that the strong vortex is formed between the impeller blades. As the vortex induces the loss of the flow field and acts as an aerodynamic noise source, supplementary splitter blades are designed to the existing impeller to suppress the identified vortex. The length and position of splitter are selected as design factors and the effect of each design factor on aerodynamic noise is numerically analyzed by using the Taguchi method. From this results, the optimum location and length of splitter for minimum radiated noise is determined. The finally selected design shows lower noise than the existing one.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.563-570
• /
• 2019

Red tide has caused massive fish kills in Korean coastal waters with devastating economic loss in the aquaculture industry since 1995. Remote sensing technique has shown to be effective for the detection of red tide in wide areas, where the absorption property of red tide water plays a central role in understanding the red tide reflectance. This study analyzed the optical absorption property of sea waters dominated by the dinoflagellate specie of Alexandirum affine, off the Tongyeong area in August, 2017. Water samples collected from 20 stations in the ship-based campaign were measured for absorption by pigment, suspended solid, and dissolved organic matter, with the corresponding water quality variables such as chlorophyll concentration and total suspended solid. The analysis showed that Alexandrium-dominated water exhibits strong absorption in the spectral range below 400 nm unlike that of diatom-dominated waters, and greater fluctuations in the range of 400 nm - 500 nm. The packaging effect in pigment absorption was stronger in Alexandrium-dominated waters, and the exponent in the absorption by detritus and gelbstoff is disparate for diatom and Alexandrium. In the model for the detritus and gelbstoff absorption (a_dg(λ)=a_dg(λ₀)e^-s(λ-λ₀)), the optimal exponent coefficient(s) for the Alexandrium was close to 0.01 rather than to 0.015, which was commonly use for modelling diatom waters.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1746-1750
• /
• 2007

The second-order scattering (SOS) phenomenon of the interaction of Pd nanoparticles with protein was reported and a simple, sensitive, palladium nanoparticle-based assay for trace amount of protein with SOS technique was developed. The SOS intensities were significantly enhanced due to the interaction of Pd nanoparticles with bovine serum albumin (BSA) or human serum albumin (HSA) at pH 3.5 or 4.0, respectively. The maximum SOS peak appeared at 260/520 nm (λex/λem). The optimal experiment conditions, affecting factors and the influence of some coexisting substances were checked. The SOS intensity increased proportionally with the increase of Pd concentration below 3.0 × 10?5 mol·L?1, while declined gradually above 4.0 × 10?5 mol·L?1. BSA within the range of 0.01-2.6 μg·mL?1 and HSA of 0.01-1.7 μg·mL?1 can be detected with this method and the detection limits were 2.3 and 11.2 ng·mL?1, respectively. The method was successfully applied to the quantitative detection of total protein content in human serum samples with the maximum relative standard deviation (RSD) lower than 2.6% and the recoveries over the range of 99.5-100.5%.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.653-660
• /
• 2007

Since the temperature of asphalt for deck plate of steel bridge during paying procedure is relatively high as $240^{\circ}C\;to\;260^{\circ}C$, the temperature of deck plate of bridge rises mere than $100^{\circ}C$ and excessive displacement and stress could occur. In order to avoid undesirable failure of base plate and determine the optimal pavement pattern, a thorough thermal analysis is needed. General structural model which is made of beam and plate element should be modified for transient heat transfer analysis; asphalt pavement material and convection effect on surface of structure need to be added. A new technique with the Equivalent Heat Source (EHS) for numerical thermal analysis for steel bridge under thermal load of Guss asphalt pavement is proposed. Since plate/beam elements which were generally used for structural analysis for bridge cannot explain convection effect easily on plate/beam surface, EHS which is determined based on calculated temperature with convection effect is used. To verify the EHS proposed in this study, numerical analyses with plate elements are performed and the results are compared with estimated temperatures. EHS might be used for other thermal analyses of steel bridge such as welding residual stress analysis and bridge fire analysis.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.80-84
• /
• 1997

Series of new chiral N-substituted benzotriazol-1-yl derivatives were synthesized and their fungicidal activities in vitro against gray mold(Botrytis cinerea), black spot(Alternaria kikuchiana) and phytophthora blight(Phytophthora capsici) were measured by the agar medium dilution method. The substituents effects between the fungicidal activities (obs. $pI_{50}$) and a various physicochemical parameters of phenoxy or thiophenoxy group(X) & alkyl or phenyl group(Y) were analyzed by the multiple regression technique. From the analyzed substituent effects, the structure-activity relationship(SAR) equations shows that the antifungal activities depend on the parameters for the optimal molecular hydrophobicity($({\Sigma}logP)_{opt}$), Van der Waals (${\Sigma}Vw$>0) volume(${\AA}^3$) and inductive constant with electron withdrawing group(${\sigma}_I$,Y>0). The activity in affected by the inductive effect (${\sigma}_I$,Y>${\sigma}_g$X) of Y-group rather than the X-group. The phenoxy substituents, 1, showed higher antifungal activity tn the thiophenoxy substituents, 2. For 1, polar substituent constant(${\sigma}^*$) was an important factor in determining the activity. And the tribromomethyl substituent, 1g showed the highest activity against the tee fungi.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.204-219
• /
• 1997

The use of fluoride is one of the most effective methods for caries prevention. Fluoridation of public water supply has been recognized, for many years, as an effective way to reduce dental caries. The fluoride supplement has been recommended when the natural fluoride was unavailable or below the optimal range. However the mechanism of caries prevention by fluoride has not yet been clarified and it is well known that an overdose of fluoride results inacute and chronic toxicity, especially dental fluorosis. Fluoride mouthrinsing solution is widely used in dentistry due to its effectiveness in carrying anticariogenic action. Understanding the effects of fluoride mouthrinsing solution on human gingival fibroblasts will provide the safety rationale for its use during the caries preventive therapy. The purpose of this study was to evaluate the cytotoxic effect of fluoride mouthrinsing solution on the human gingival fibroblast in vitro. The human gingival fibroblasts were cultured from healthy gingiva on the extracted deciduous teeth of children. Cells were inoculated into a 24-well plate with $1{\times}10^4cells/well$ of medium at $37^{\circ}C$, 100% humidity, 5% $CO_2$ incubator for 24 hours. And the cells were counted by using the hemocytometer at each designed study. Human gingival fibroblasts were cultured in growth medium after one minute application range of 0.02%-0.2% NaF solution and 0.1% $SnF_2$ solution. The cells used in this study were between fifth to eighth passage number. The cell morphology was examined by inverted microscope and cell proliferation was measured by incorporating $[^3H]$-thymidine into DNA. DNA synthesis by human gingival fibroblasts was assessed by $[^3H]$-thymidine uptake assays while the cell activity was measured by MTT assay. Each concentrated fluoride mouthrinsing solution was estimated for its biocompatability with fibroblasts by the tissue culture technique. The results of this study were as follows : 1. It was observed that at 0.05%, 0.2% NaF mouthrinsing solution the cytoplasmic processes became globular. When 0.1% $SnF_2$ mouthrinsing solution was applied, the cytoplasmic process and cell morphology were disappeared. 2. DNA synthetic activity was reduced regardless of the concentration of the fluoride mouthrinsing solution. However, the result is statistically insignificant except 0.1% $SnF_2$ mouthrinsing solution(p<0.05). 3. Our results indicate that 0.02%, 0.05% concentrations of NaF mouthrinsing solution caused minimal cytotoxicity. But 0.2% NaF and 0.1% $SnF_2$ concentration were a significant difference between the cell activity in the experimental group and control group (p<0.05). 4. After appling 0.05% & 0.02% NaF fluoride mouthrinsing solution, cell activity was restored to the control groups level according to incubating time. The results suggest that direct exposure to fluoride solution inhibits gingival fibroblast activity. Therefore, for the most effective use of fluoride use, lowering the concentration of fluoride mouthrinsing is advisable because it maintains biocompatability and free ion in the oral fluid.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.379-389
• /
• 2014

The purpose of this study is to optimize the patient(examinee) flow in a health examination center via a simulation model and to improve operational efficiency. Two experimentation scenarios were implemented into the simulation model to determine which proposed scenario provides better improvement in terms of the following performance measures: LOS(Length of Stay), staff utilization, and occupancy level. The simulation results demonstrated that there was no significant difference in response results of two scenarios. Although the original motivation of this study was suggest optimal policy for a patient(examinee) flow, the insight into applying simulation in efficiently managing hospital operations is of more value. Simulation approach is a powerful technique that supports efficient decision-making compared to traditional healthcare management approach based on past experience, feelings, and intuition. Therefore, the proposed experimentation model has wide applicability in healthcare systems.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Construction that over 70% of the structure consists of concrete gets bigger and higher gradually and the demand of that is increasing as well. However, it's not easy to supply young and skilled persons on construction site because of social avoidance phenomena about 3D occupation, so it causes serious problems like aging and shortage of technicians. To solve the problems, executives related to the construction field make a management effort in various ways such as construction period shortening, labor productivity improvement and good quality but recently, they have an increasing interest in the necessity of the modularization of the high-rise building and the automation of the engineering development for the strengthening of international competitive power as more active and long-term alternatives. Therefore, this study is to propose the roadmap in order to make lots of efforts in developing construction technologies of high-rise buildings by performing a foundation study, the strategy for 4-step research development, on modularized construction system of concrete structure of high-rise buildings through domestic and foreign preceding research analyses associated with optimal design modularization technique, module factory automation and assembly automation of modularized objects.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.365-376
• /
• 2020

Immature embryogenesis is a useful process in wheat tissue culture, including transgenic technology, because of its high regeneration efficiency compared to that in other tissues. However, it is a very labor-intensive and time-restrictive method, because the preparation of immature embryos is limited to the optimal time after flowering. In this experiment, 'Speed Breeding', a breeding technique that accelerates breeding generation advancement by extending the photoperiod, was applied to the wheat variety 'Bobwhite'. A controlled growth room was constructed by adjusting the photoperiod (22-hour light/2-hour dark) using LED lights at temperature of 22℃. After vernalization of the Bobwhite seeds at 4℃ for 4 weeks, the seedlings were grown in a controlled growth room and a greenhouse to compare the heading date. In both conditions, calli were induced from immature embryos on the 11^th day after flowering. After 4 weeks, the calli were transferred to a regeneration medium. Regeneration efficiencies under greenhouse conditions and Speed Breeding conditions were determined as 45.05% and 43.18%, respectively. Antioxidant enzyme activity and reference gene expression analysis were performed to confirm the presence of stress due to an extremely long-day photoperiod. As a result, the antioxidant enzyme activity was not distinguished from that of the greenhouse condition. The reference gene expression analysis revealed that the PsaA and CDC genes were highly expressed under the Speed Breeding condition. However, expression of PsbA was similar expression in both conditions. These results will provide useful information for the application of immature embryogenesis to the wheat transformation system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.4
• /
• pp.283-289
• /
• 2014

This study was conducted to develop a non-destructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression(PLSR). Garlic and ginger powder, which are used as natural seasoning and in health supplement foods, were selected for this experiment. Samples were adulterated with corn starch in concentrations of 5-35%. PLSR models for adulterated garlic and ginger powders were developed and their performances evaluated using cross validation. The $R^2_c$ and SEC of an optimal PLSR model were 0.99 and 2.16 for the garlic powder samples, and 0.99 and 0.84 for the ginger samples, respectively. The variable importance in projection (VIP) score is a useful and simple tool for the evaluation of the importance of each variable in a PLSR model. After the VIP scores were taken pre-selection, the Raman spectrum data was reduced by one third. New PLSR models, based on a reduced number of wavelengths selected by the VIP scores technique, gave good predictions for the adulterated garlic and ginger powder samples.