• 대한산업공학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 1979

This paper discusses an application of discrete variable Servo Theory to the analysis of the effectiveness of production-inventory control system which uses exponential smoothing as a specific forecasting technique by establishing a new model which consists of such three departments as production planning, production, and inventory. The objective of the new production-inventory model is to keep the production to the optimal level of minimum production cost in production planning problem for obtaining, the stability of inventory subject to demand variation. On this basis, the dynamic characteristic of the system with the change of the parameters is clarified by the numerical analysis. The results of the numerical analysis show the effect that is obtained by the simultaneous stability of production and inventory as soon as possible.

• Journal of Microbiology and Biotechnology
• /
• 제6권6호
• /
• pp.451-455
• /
• 1996

Physiological studies on the expression of Bacillus thuringiensis subsp. tenebrionis (Btt) gene coding for insecticidal protein in recombinant Escherichia coli 537 were carried out to identify optimal culture condition. It was necessary to shift culture temperature from 30 to $42^{\circ}C$ to express the gene. Expression of the Btt toxin gene by recombinant E. coli 537 began within one hour after induction. Complex nitrogen sources increased production of the insecticidal protein. The total insecticidal protein was 0.5 g/I when using yeast extract as a complex nitrogen source. Soybean hydrolysate showed apparently the highest induction efficiency. After induction, the cellular content of the insecticidal protein was 5.4 times higher than it had been before induction. The optimal cultivation strategy was found to grow cells for 7hours at $30^{\circ}C$ and then 5-8 hours at $42^{\circ}C$. The optimal cultivation pH for the production of insecticidal protein was 6.5. The Btt toxin produced by the recombinant E. coli 537 was found to have the same level of potency against Colorado potato beetle as the original toxin.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권5호
• /
• pp.423-443
• /
• 2009

We present the design and implementation of a unique sensing and actuation application -- the Illuminator: a sensor network-based intelligent light control system for entertainment and media production. Unlike most sensor network applications, which focus on sensing alone, a distinctive aspect of the Illuminator is that it closes the loop from light sensing to lighting control. We describe the Illuminator's design requirements, system architecture, algorithms, implementation and experimental results. The system uses the Illumimote, a multi-modal and high fidelity light sensor module well-suited for wireless sensor networks, to satisfy the high-performance light sensing requirements of entertainment and media production applications. The Illuminator system is a toolset to characterize the illumination profile of a deployed set of fixed position lights, generate desired lighting effects for moving targets (actors, scenic elements, etc.) based on user constraints expressed in a formal language, and to assist in the set up of lights to achieve the same illumination profile in multiple venues. After characterizing deployed lights, the Illuminator computes optimal light settings at run-time to achieve a user-specified actuation profile, using an optimization framework based on a genetic algorithm. Uniquely, it can use deployed sensors to incorporate changing ambient lighting conditions and moving targets into actuation. Experimental results demonstrate that the Illuminator handles various high-level user requirements and generates an optimal light actuation profile. These results suggest that the Illuminator system supports entertainment and media production applications.

• 한국미생물·생명공학회지
• /
• 제25권3호
• /
• pp.311-316
• /
• 1997

A high xylitol producing yeast was isolated from the sludge of xylose manufacturing factory and then identified as Candida tropicalis DS-72 according to physiological properties. The strain was able to produce xylitol in a high concentration up to 72g/l from 100g/l xylose in 32 hours. Medium optimization for xylitol production by C. tropicalis DS-72 was performed. Effect of various nitrogen sources on xylitol production was investigated. Of nitrogenous compounds, yeast extract was the most suitable organic nitrogen nutrient for the enhancement of xylitol production. However, inorganic nitrogen resulted in a low cell concentration and did not produce xylitol. Effect of inorganic salts such as KH$_{2}$PO$_{4}$, and MgSO$_{4}$, 7H$_{2}$O on xylitol production was also studied. Optimal medium was selected as xylose 100g/l, yeast extract 10g/l, KH$_{2}$PO$_{4}$, 5 g/l and MgSO$_{4}$, 7H$_{2}$O 0.2 g/l. Xylitol of 88 g/l was produced from 100 g/l xylose in 30 hours using the optimal medium in a flask. In a fermentor, a fed-batch culture with 300g/l xylose was carried out. A final xylitol concentration of 240 g/l in the culture could be obtained in 43 hours of culture time by maintaining the high level of dissolved oxygen during growth phase and limiting the dissolved oxygen in the same culture during production phase. This result corresponded to a xylitol yield of 80% and a xylitol productivity of 5.58 g/1-h.

• Preventive Nutrition and Food Science
• /
• 제5권4호
• /
• pp.194-196
• /
• 2000

A bacterium capable of producing polygalacturonase was isolated from kimchi, and identified as a strain of Bacillus. The effects of culture conditions and medium composition on enzyme production were investigated. Among the tested carbon sources, polygalacturonic acid or pectin was most effective for the production of the enzyme. Therefore, it seemed that the enzyme was induced when pectin or polygalacturonic acid was used as a sole source of carbon. The optimal concentration of polygalacturonic acid was 0.5%. For nitrogen sources, yeast extract was best for the production of the enzyme, at a level of 0.25%. The enzyme was maximally produced by cultivating the isolated Bacillus sp. at an initial pH of 88.0 and temperature of 45$^{\circ}C$ for 20 hours.

• 한국미생물·생명공학회지
• /
• 제17권5호
• /
• pp.519-523
• /
• 1989

Aspergillus sp.로부터 glucoamylase를 생성키 위한 조건을 검토하였다. 곰팡이는 탄소원으로 soluble starch, 질소원으로 yeast extract를 사용했을 때 최대 효소생성을 얻을 수 있었다. 그리고, 탄소원 및 질소원의 농도에 따른 효소생성은 soluble starch를 5%, yeast extract를 1% 수준으로 사용했을 때 효소생성은 극대화하였다. 또한 배지의 초기 pH를 6.0, 그리고 배양온도를 28$^{\circ}C$로 유지했을 때 효소생성이 높았다. 고체배지를 사용했을 때에는, 밀기울 배지가 glucoamylase 생성을 위해서 가장 효과가 좋았다.

• 대한교통학회지
• /
• 제14권1호
• /
• pp.51-67
• /
• 1996

The optimal path-finding problem becomes complicated when multiple variables are simultaneously considered such as physical route length, degree of congestion, traffic capacity of intersections, number of intersections and lanes, and existence of free ways. Therefore, many researchers in various fields (management science, computer science, applied mathematics, production planning, satellite launching) attempted to solve the problem by ignoring many variables for problem simplification, by developing intelligent algorithms, or by developing high-speed hardware. In this research, an integration of expert system technique and case-based reasoning in high level with a conventional algorithms in lower level was attempted to develop an optimal path-finding system. Early application of experienced driver's knowledge and case data accumulated in case base drastically reduces number of possible combinations of optimal paths by generating promising alternatives and by eliminating non-profitable alternatives. Then, employment of a conventional optimization algorithm provides faster search mechanisms than other methods such as bidirectional algorithm and $A^*$ algorithm. The conclusion obtained from repeated laboratory experiments with real traffic data in Seoul metropolitan area shows that the integrated approach to finding optimal paths with consideration of various real world constraints provides reasonable solution in a faster way than others.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.51-64
• /
• 1998

Mean shifts may be found in tool wear in machining, drawing, stamping and moulding operations, which make the process quality level deteriorate over time. In such situations, it is necessary to reset or readjust the manufacturing process at regular time basis or by inspection to prevent defective items produced. Although the deterioration rate may be assumed to be linear in a production cycle, there are many cases where the rate varies after resetting due to the variation of tool characteristics or by using the resharpened tools. In such cases, the deterioration rate should not be assumed to be a deterministic constant but a random variable. This paper is to find an optimal resetting period and quality level for such production processes.

• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.956-962
• /
• 2005

This paper presents an integrated analysis of production and financing decisions. We assume that a cash storage unit is installed to manage the cash flows related with production activities such as raw material procurement, process operating setup, Inventory holding cost and finished product sales. Temporarily financial investments are allowed for more profit. The production plant is modeled by the Batch-Storage Network with Recycle Streams in Yi and Reklaitis (2003). The objective function of the optimization is minimizing the opportunity costs of annualized capital investment and cash/material inventory while maximizing stockholder's benefit. No depletion of all the material and cash storage units is major constraints of the optimization. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the cash and material inventory holdups. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two subproblems and analytical lot sizing equations under a mild assumption about the cash flow pattern of stockholder's dividend. The first subproblem is a separable concave minimization network flow problem whose solution yields the average material flow rates through the networks. The second subproblem determines the decisions about financial Investment. Finally, production and financial transaction lot sizes and startup times can be determined by analytical expressions as far as the average flow rates are calculated. The optimal production lot and storage sizes considering financial factors are smaller than those without such consideration. An illustrative example is presented to demonstrate the results obtainable using this approach.

• 한국미생물·생명공학회지
• /
• 제30권4호
• /
• pp.325-331
• /
• 2002

아카시재목 버섯 균사체로부터 혈전용해효소를 생산하기 위한 최적 배양조건을 조사하였다. 복합배지 중 CVM이 가장 우수하였으며, 탄소원, 질소원, 인산원 및 무기질원으로 각각 2% galactose, 0.6% yeast extract와 0.1% $NaNO_3$, 0 0.1 % $K_2HPO_4$, 및 0.05% $MgSO_4$. $7H_2O$의 첨가에 의하여 효소의 활성이 가장 증가하였다. 따라서 F. fraxinea로부터 혈전용해효소를 생산하기 위한 최적 배지조건은 2% galactose, 0.6% yeast extract, 0.1 % $NaNO_3$, 0.1 % $K_2HPO_4$ 및 0.05% $MgSO_4$. $7H_2O$이다. 이상의 배지를 사용하여 배양온도 $25^{\circ}C$ 초기 pH 9에서 10일 동안 배양하였을 때 효소의 생산이 가장 높은 결과를 나타내었다. 배양액 중의 효소의 최적 온도 및 pH는 $40^{\circ}C$ 및 pH 10이었다. 본 효소의 활성이 PMSF와 aprotinin에 의하여 완전히 억제되는 것으로 보아 본 효소가 senne protease 계열의 효소임을 추정할 수 있었다.