• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.481-484
• /
• 2007

Efficiency of geothermal heat exchanger operation has close relation with temperature variation of the aquifer where the exchanger is installed. In the case of long-term operation, temperature distribution of the aquifer would be similar to that of water circulating in the exchanger, which causes the decrease of heat exchange rate. Therefore, the operation period of the heat exchanger should be controlled so that the temperature distribution of the aquifer is recovered. We developed a model to determine the operation period to acquire the optimal efficiency under the given aquifer condition. With this suggested method, when we use closed-loop heat exchanger, the operation efficiency of the geothermal heat exchanger is expected to be maximized by determining the optimal operation period.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.379-385
• /
• 2011

This paper presents an optimal design of a direct-drive permanent magnet synchronous generator for a small-scale wind energy conversion system. An analytical model of a small-scale grid-connected wind energy conversion system is presented, and the effects of generator design parameters on the payback period of the system are investigated. An optimization procedure based on genetic algorithm method is then employed to optimize four design parameters of the generator for use in a region with relatively low wind-speed. The aim of optimization is minimizing the payback period of the initial investment on wind energy conversion systems for residential applications. This makes the use of these systems more economical and appealing. Finite element method is employed to evaluate the performance of the optimized generator. The results obtained from finite element analysis are close to those achieved by analytical model.

• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.39-47
• /
• 1992

This paper is concerned with cost analysis and determination of warranty period in a stepdown warranty policy. Manufacturer's warranty cost is analyzed for nonrepairable item, where the warranty is assumed to be renewed at any failure within the warranty period. It is shown that from this result in free replacement policy, pro-rata policy and hybrid policy can be easily calculated. The method of determining optimal warranty period is also explored.

• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.511-522
• /
• 2024

The optimal yield is defined as the amount of groundwater that maintains a dynamic equilibrium state of the groundwater system over a long period. We examined the current problems, improvements, and methods for estimating the optimal groundwater yield in Korea, considering sustainable groundwater development. The optimal yield for individual wells and the sustainable yield for the entire groundwater basin were reviewed. Generally, the optimal yield for individual wells can be determined using long-term pumping and step drawdown tests. The optimal yield can be determined by groundwater quantity and quality, economic, and water use rights factors. The optimal yield of individual wells in the groundwater basin must be determined within the total sustainable amount of the entire groundwater basin, such that the optimal yield of a new well must be less than the remaining total sustainable amount, exempting the total optimal yield of the existing wells. Therefore, the optimal yield may be determined based on the estimated optimal yield at least twice per year. In addition, if groundwater level and pumping quantity data for at least one year are available, it may be effective to use the Hill, Harding, and zero groundwater-level change methods to re-estimate the optimal yield.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.137-149
• /
• 2013

PURPOSES: This study is to suggest the Contribution of Road Capital in Industry and Optimal Level of Road Investment in South Korea METHODS: Based on the literature review, This research is empirically estimated using disaggregate and disaggregated data composed of 10-sectors covering the entire korea economy for the period 1970~2000. The relevant policy questions addressed in this report are : cost reduction and Scale elasticities of road, effect of road capital stock on demand for labor, capital and materials, marginal effect of road, industry TFP growth decomposition, Net Social Rates of Returns, optimal of road capital. RESULTS : The marginal benefits of the road capital at the industry level were calculated using the estimated cost elasticities. Demand for the road capital services varies across industries as do the marginal effects. The marginal benefits are positive for the principal industries. This suggests that for these industries the existing stock of road capital may be under supplied. CONCLUSIONS: This results emerges is that the ratio of the optimum to actual road capital, measured by road, was high at beginning of the period 1970s and declined 1990s. There appears to be evidence of under-investment in road capital. That is continuous and premeditated investment for road which lead to saving time and finance.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.79-84
• /
• 2017

In a cognitive radio network (CRN), cognitive radio users (CUs) should be powered by a small battery for their operations. The operations of the CU often include spectrum sensing and data transmission. The spectrum sensing process may help the CU avoid a collision with the primary user (PU) and may save the energy that is wasted in transmitting data when the PU is present. However, in a time-slotted manner, the sensing process consumes energy and reduces the time for transmitting data, which degrades the achieved throughput of the CRN. Subsequently, the sensing process does not always offer an advantage in regards to throughput to the CRN. In this paper, we propose a scheme to find an optimal policy (i.e., perform spectrum sensing before transmitting data or transmit data without the sensing process) for maximizing the achieved throughput of the CRN. In the proposed scheme, the data collection period is considered as the main factor effecting on the optimal policy. Simulation results show the advantages of the optimal policy.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.306-320
• /
• 2021

To ensure safe port operations around the world, it is important to solve mooring problems. In particular, the many ports that face open seas have difficulties with long-period waves. As a countermeasure, the installation of a breakwater is proposed for mooring safety. However, this often cannot be put into practice because of financial issues. Instead, port terminals control berthing schedules with weather forecasting. However, mooring problems remain unsolved, because of inaccurate wave forecasting. To quantify the current situation, numerical simulations are presented with ship motions, fender deflections, and rope tensions. In addition, novel simulations for mooring ropes are proposed considering tension, friction, bending fatigue, and temperature. With this novel simulation, the optimal mooring method in terms of safety and economic efficiency was confirmed. In terms of safety, the optimal mooring method is verified to minimize dangerous mooring situations. Moreover, the optimal mooring method shows economic benefits and efficiency. It can help to reinforce the safety of port terminals and improve the efficiency of port operations.

• Journal of Applied Reliability
• /
• v.12 no.2
• /
• pp.57-66
• /
• 2012

In this paper, we consider the periodic preventive maintenance model for a repairable system following the expiration of replacement-repair warranty. Under this preventive maintenance model, we derive the expressions for the expected cycle length, the expected total cost and the expected cost rate per unit time. Also, we determine the optimal preventive maintenance period and the optimal preventive maintenance number by minimizing the expected cost rate per unit time. Finally, the optimal periodic preventive maintenance policy is given for Weibull distribution case.

• International Journal of Reliability and Applications
• /
• v.12 no.1
• /
• pp.41-48
• /
• 2011

This paper considers the maintenance model suggested by Jung and Park (2010) to adopt the Bayesian approach and obtain an optimal replacement policy following the expiration of NFRRW. As the criteria to determine the optimal maintenance period, we use the expected cost during the life cycle of the system. When the failure times are assumed to follow a Weibull distribution with unknown parameters, we propose an optimal maintenance policy based on the Bayesian approach. Also, we describe the revision of uncertainty about parameters in the light of data observed. Some numerical examples are presented for illustrative purpose.

• Korean Journal of Veterinary Research
• /
• v.27 no.1
• /
• pp.41-45
• /
• 1987

The present study was carried out to investigate the optimal conditions on blastogenesis of guinea pig lymphocytes. A microculture system in conjuction with a semiautomatic multiple sample harvester was used to study the in vitro optimal condition of guinea pig lymphocytes. Careful analysis of lymphocyte transformation to concanavalin A (Con A) and lipopolysaccharide (LPS) mitogen determined optimal conditions as: (a) 10% fetal bovine serum in RPMI-1640 medium (b) 48-hour culture period.