• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.5
• /
• pp.573-577
• /
• 2006

The rutin content of Fagopyrum tataricum is 100-fold higher than that of Fagopyrum esculentum. For the development of a rutin-containing beverage, a suitable method to extract rutin from buckwheat (Fagopyrum tataricum) with high rutin yield was investigated. A roasting temperature range of $310/240^{\circ}C$ (Ed-confirm that this is indeed a range; otherwise perhaps, 'Roasting temperatures ranging from 310 to $240^{\circ}C$ were considered$\ldots$') was considered to be the best as the basic color reference. Rutin content varied according to the roasting time and heating temperature; i.e., it decreased with increasing roasting time and temperature. (Ed- this sentence is unnecessarily complicated and should be simplified to 'Rutin content decreased with increasing roasting time and heating temperature.') The optimal extraction temperature and processing time were obtained as $80^{\circ}C$ and 10 minutes to maximize the rutin concentration in the extract.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.5
• /
• pp.653-662
• /
• 2002

Korean native Perilla Jangachi (salted and fermented vegetable) is popular and well-known but little study on its composition and most palatable condition has been reported. This study was performed to observe the change in the contents of chemical components and sensory evaluation of Perilla Jangachi which was prepared through two processing. First, as a pretreatment, Perilla leaves were soaked in salt water. The optimal level of salt concentration and soaking time (salt 4%, soaking time 42hours) was determined. Second, soaked Perilla Jangachi was steamed and then fermented in various ingredients like soy sauce, sugar, onion and so on. In this study, Perilla Jangachi was made by 3 levels of steaming time(30 seconds, 60 seconds, 90 seconds) and onion contents (10%, 30%, 50%). The optimal level of onion contents and steaming time was determined with the results of sensory evaluation by response surface methodology and analysis of composition. Sodium contents were decreased as the levels of onion contents were increased. Flavonoids contents weren't increased although contents of onion were increased. But they were influenced on steaming time that as the levels of steaming time were shortened, flavonoids contents were increased. To lengthen the shelf-life of Perilla Jangachi, the activities of enzyme peroxidase - which changes Jangachi's quality bad - by various levels of steaming time were measured. After steaming 50 seconds, peroxidase became inactive. Reducing sugar contents were decreased relying on either increased steaming time and onion contents. While steaming 30 seconds and 10% onion contents, the content of reducing sugar was 0.858% but steaming 90 seconds and 50% onion contents, it became 0.372%. Among the sensory attributes, brownness was increased as onion contents increased and steaming more than 60 seconds. Saltiness, sweetness, perilla flavor were greater relying on decreased onion contents. Toughness was decreased as both the amounts of onion and steaming time were increased. With this results, the most optimal adding level of onion content and steaming time was determined. Steaming 72 seconds and adding onion 27% was established as a optimal condition of Perilla Jangachi.

• Korean Journal of Ichthyology
• /
• v.31 no.4
• /
• pp.235-240
• /
• 2019

The anaesthetic effect of tricaine methanesulfonate (MS-222) concentrations and water temperatures for longtooth grouper (Epinephelus moara) and hybrid grouper (E. moara ♀ × E. lanceolatus ♂) were investigated. Anesthetic induction and recovery time were measured at 18, 22, 26 and 30℃ of Cwater temperature and 100, 150, 200 and 250 ppm of anesthetic concentrations. Anesthetic induction time tended to decrease with increasing concentration and water temperature. Recovery time was proportional to concentration, but inversely proportional to water temperature. However, there was no significant differences in recovery time at 22℃ or lower. The optimal anesthesia condition was 30℃ and 100 ppm, which was the shortest recovery time for longtooth grouper, and 150 ppm at 30℃ in the case of hybrid grouper because anesthetic time is significantly different with 100 ppm in spite of no significant differences with 100 ppm for recovery time. As a results of two-way ANOVA test, there was a significant difference between the species of longtooth and hybrid grouper. On the other hand, there was no interaction effect between concentration and species. Also, there was no interaction effect among species, concentration, and water temperature.

• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.703-712
• /
• 2017

The composite blades of offshore wind turbines accumulate structural damage such as fatigue cracking due to harsh operation environments during their service time, leading to premature structural failures. This paper investigates various fatigue crack models for reproducing crack development in composite blades and proposes a stochastic approach to predict fatigue crack evolution and to analyse failure probability for the composite blades. Three typical fatigue models for the propagation of fatigue cracks, i.e., Miner model, Paris model and Reifsnider model, are discussed to reproduce the fatigue crack evolution in composite blades subjected to cyclical loadings. The lifetime probability of fatigue failure of the composite blades is estimated by stochastic deterioration modelling such as gamma process. Based on time-dependent reliability analysis and lifecycle cost analysis, an optimised maintenance policy is determined to make the optimal decision for the composite blades during the service time. A numerical example is employed to investigate the effectiveness of predicting fatigue crack growth, estimating the probability of fatigue failure and evaluating an optimal maintenance policy. The results from the numerical study show that the stochastic gamma process together with the proper fatigue models can provide a useful tool for remaining useful life predictions and optimum maintenance strategies of the composite blades of offshore wind turbines.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1225-1232
• /
• 2023

The ¹⁸⁰W is the lightest isotope of Tungsten with small abundance ratio. It is slightly radioactive (α decay), with an extremely long half-life. Its separation is possible by non-conventional single withdrawal cascades. The ¹⁸⁰W is used in radioisotopes production and study of metals through gamma-ray spectroscopy. In this paper, single withdrawal cascade model is developed to evaluate multicomponent separation in non-conventional transient cascades, and available experimental results are used for validation. Numerical studies for separation of ¹⁸⁰W in a transient single withdrawal cascade are performed. Parameters affecting the separation and equilibrium time of cascade such as number of stages, cascade arrangements, feed location and flow rate for a fixed number of gas centrifuges (GC) are investigated. The Salp Swarm Algorithm (SSA) as a bio-inspired optimization algorithm is applied as a novel method to minimize the feed consumption to obtain desired concentration in the collection tank. Examining different cascade arrangements, it is observed in arrangements with more stages, the separation is further efficient. Based on the obtained results, with increasing feed flow rate, for fixed product concentration, the cascade equilibrium time decreases. Also, it is shown while the feed location is the farthest stage from the collection tank, the separation and cascade equilibrium time are well-organized. Finally, using SSA optimal parameters of the cascade is calculated, and optimal arrangement to produce 5 gr of ¹⁸⁰W with 90% concentration in the tank, is proposed.

• International Journal of Reliability and Applications
• /
• v.13 no.1
• /
• pp.19-35
• /
• 2012

This paper presents an optimum design of step-stress partially accelerated life test (PALT) plan which allows the test condition to be changed from use to accelerated condition on the occurrence of fixed number of failures. Various life distribution models such as exponential, Weibull, log-logistic, Burr type-Xii, etc have been used in the literature to analyze the PALT data. The need of different life distribution models is necessitated as in the presence of a limited source of data as typically occurs with modern devices having high reliability, the use of correct life distribution model helps in preventing the choice of unnecessary and expensive planned replacements. Truncated distributions arise when sample selection is not possible in some sub-region of sample space. In this paper it is assumed that the lifetimes of the items follow Truncated Logistic distribution truncated at point zero since time to failure of an item cannot be negative. Optimum step-stress PALT plan that finds the optimal proportion of units failed at normal use condition is determined by using the D-optimality criterion. The method developed has been explained using a numerical example. Sensitivity analysis and comparative study have also been carried out.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• Quality Improvement in Health Care
• /
• v.9 no.1
• /
• pp.6-17
• /
• 2002

Background : This study was conducted to investigate the current situation of medical supply purchasing and stock management at general hospitals having more than 150 beds in Korea and to find methods of effective purchasing and optimal stock management. Methods : Survey was done from staff at the purchasing departments of 229 general hospitals throughout Korea. Data collection was done using a structured questionnaire between January 3 to March 15, 2001. The survey form was returned from 88 hospitals (rate of return: 38.4%). Results : Firstly, 13.6% of the hospitals did not carry the optimal stock of medical supplies, the lead time optimal stock was 3 weeks or longer in 64.4% of the hospitals. Secondly, since 69.8% of the hospitals showed passive attitude toward training on purchasing management and stock management techniques. Thirdly, as for the question on the presence or absence of a deliberation committee for purchasing of new medical supplies, 60% of the hospitals with less than 300 beds did not have one, and 9.4% of the hospitals opened the deliberation committee less than twice a year. Conclusion : At the time of purchasing new medical supplies, purchasing should be done according to the decision by the deliberation committee so that no deduction is made at the time of claiming insurance, and by setting a certain period of time, purchasing of those medical supplies that were not purchased during this period needs to be done according to the decision by the deliberation committee.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.2
• /
• pp.55-64
• /
• 2008

This study aims to analyze the sensitivity of WSM(weighted scenario method)-AHP method according to variation of nonlinear exponent for accessibility criteria, which are used to make urbanization potential maps with the optimal weighting value for multiple criteria in grid-based GIS technique. Besides this study tried to develop WSM-AHP2 which is simplified by using rank of the potential value for each scenario. The two methods were applied to the test area, Suwon city located south area of Seoul, with time series land-use maps of 1986 and 1996. The evaluation system of urbanization potential have 7 criteria including 6 accessibility criteria. The results of WSM-AHP2, the optimal weighting values and their corresponding potential maps, have almost similar with those of WSM-AHP. In the application of CA(cellular automata) model for expansion of urbanized area using the three potential maps by WSM-AHP, WSM-AHP2, and specialists's AHP evaluation, it also showed that the accuracy of simulation for actual urban area is the highest in the potential map of WSM-AHP, followed by WSM-AHP2 and specialists's AHP evaluation. From the results of this study, WSM-AHP and simplified WSM-AHP2 will be used to generate the optimal potential maps for land-use planning in urban fringe area.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.318-326
• /
• 1999

Recently, electronic systems including computers have been rapidly shrinking in size while at the same time the complexity and the capability of these systems continue to grow/sup [1]/. Thus, system volumes have decreased as system power has increased, resulting in dramatic increases in system heat density. The high temperature of the computer system is considered as the major reason for low performance and shortening life of the product. It is necessary to solve this problem due to the heat density increased and to develop the design skill of the computer cabinet according to miniaturization. M4500 desk-top computer was selected for analyzing the thermal management inside cabinet. The cabinet volume, the configuration of the heating devices, the size and location of air ventilation, and the fan selection have been investigated as the important parameters to find out an optimal cabinet design. The objectives of this project were to analyze which design parameters would affect cooling performance by thermal strategy, to design an optimal model, and to measure the temperatures of the main parts to confirm the effect of the thermal design. The temperatures of each part of the optimal model were compared with those of the existing model. As a result. the volume of this miniaturized model was about 16% smaller than that of M4500 without any change in operating performance.