• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.559-560
• /
• 2006

Powder forging is used for heavy-loaded parts (rings of rolling-contact bearings, gears etc.) production. Rolling contact fatigue is material property values of which characterize possibility of practical utilization of such parts. Rolling contact fatigue of some steels obtained out of prealloyed powders Astaloy CrM, Atomet 4601, Atomet 4901 and powder blends iron-carbon-nickel by hot forging is studied in the present paper. Effect of various kinds of heat and thermomechanical treatment on rolling contact fatigue is determined. Thermomechanical treatment provides optimal values of rolling contact fatigue. In this case steel structure contains up to 40% of retained metastable austenite which is transformed to martensite on trials. Thus typically crack is generated on residual pores and non-metallic inclusions instead of martensite zones in wrought steels.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.38-38
• /
• 2003

Blocking the first mitotic cleavage of the zygote is a key tool for chromosome-set manipulations in fish. We developed an improved method for inducing tetraploidy by blocking the mitosis with a combination of heat shock at 40.5$^{\circ}C$ for 1, 2 or 3 min followed by cold shock at $1.5^{\circ}C$ for 30, 45 or 60 min. When applied during the first cleavage metaphase of mud loach (Misgurnus mizolepis) zygotes, the optimal combination was heat for 2 min followed by cold for 45 min. At 1 month, the frequency of 4N survivors and the yield from total eggs fertilized was 55.7% and 14.4%, respectively, compared to heat shock alone with 20.0% efficiency and 3.6% yield. The effectiveness of the procedure was confirmed by diploid mitotic gynogenesis using transgenic markers. The overall yield of homozygous diploids, 34.0%, was better than that for single heat shock, 17.3%. The tetraploids and homozygous diploids had higher early mortality than normal diploid controls. However at 1 month, the viability of the tetraploids was the same as normal diploids. For gynogenetic diploids, the survival was similar to normal diploids after 3 months. The high efficiency of this new protocol extends the opportunity to study polyploidy in basic and applied research.

• 생명과학회지
• /
• 제29권12호
• /
• pp.1358-1363
• /
• 2019

본 연구에서는 우엉의 뿌리를 차의 원료로 가공하는 과정에서 필요한 적정한 가열 처리 조건 설정에 대한 자료를 얻고자 열처리 단계의 가열 온도와 시간에 따른 유리아미노산의 함량 변화와 항산화 활성수준 등을 비교하였다. 항산화 활성을 비교하기 위해 실시한 DPPH와 ABTS 라디칼 소거능 측정 결과에서 180℃-4분 가열 처리 조건과 200℃-3분 가열 처리 조건이 비교적 높은 활성을 가지는 것으로 나타났다. 이는 폴리페놀 함량 측정에서 200℃-3분 가열 처리 조건과 180℃-4분 가열 처리 조건에서 각각 62.74 mg/l와 60.09 mg/l로 다른 가열 조건보다 상대적으로 높은 결과를 보인 것과 관련된 것으로 판단되었다. 가열 조건별 우엉차의 유리 아미노산 분석 결과에서 가열온도와 시간이 증가됨에 따라 초기의 아미노산 함량보다 감소되는 경향을 확인할 수 있었다. 특히 phenylalanine, histidine, leucine과 isoleucine 등의 함량 변화가 높은 비율로 나타났으며, aspartic acid, proline 등은 비교적 감소 비율이 낮았다. 전반적으로 180℃에서 3분~4분 가열 조건과 200℃의 2분 가열 조건을 넘어서는 온도와 시간 조건에서는 아미노산 함량이 급격히 감소되었다. 이상의 결과에서 실험이 실시된 항산화 활성과 유리 아미노산 함량을 기준으로 180℃-4분 수준의 가열 처리 조건이 가장 우수한 것으로 판단되었다.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.513-521
• /
• 2017

Robust optimal operation of a microgrid is required since the increase of the penetration level of renewable generators in the microgrid raises uncertainty due to their intermittent power output. In this paper, an application of probabilistic optimization method to economical operation of a microgrid is studied. To simplify the treatment of the uncertainties of renewable generations and load, the new 'band of virtual equivalent load variation' is introduced considering their uncertainties. A simplified robust optimization methodology to generate the scenarios within the band of virtual equivalent load variation and to obtain the optimal solution for the worst scenario is presented based on Monte Carlo method. The microgrid to be studied here is composed of distributed generation system(DGs), battery systems and loads. The distributed generation systems include combined heat and power(CHP) and small generators such as diesel generators and the renewable energy generators such as photovoltaic(PV) systems and wind power systems. The modeling of the objective function for considering interruption cost by the penalty function is presented. Through the case study for a microgrid with uncertainties, the validity of proposed robust optimization methodology is evaluated.

• 대한의용생체공학회:의공학회지
• /
• 제44권1호
• /
• pp.85-91
• /
• 2023

Stress urinary incontinence (SUI) occurs when abdominal pressure increases, such as sneezing, exercising, and laughing. Surgical and non-surgical treatments are the common methods of SUI treatment; however, the conventional treatments still require continuous and invasive treatment. Laser have been used to treat SUI, but excessive temperature increase often causes thermal burn on urethra tissue. Therefore, the optimal conditions must be considered to minimize the thermal damage for the laser treatment. The current study investigated the feasibility of the laser irradiation condition for SUI treatment using non-ablative 980 nm laser from a safety perspective through numerical simulations. COMSOL Multiphysics was used to analyze the numerical simulation model. The Pennes bioheat equation with the Beer's law was used to confirm spatio-temporal temperature distributions, and Arrhenius equation defined the thermal damage caused by the laser-induced heat. Ex vivo porcine urethral tissue was tested to validate the extent of both temperature distribution and thermal damage. The temperature distribution was symmetrical and uniformly observed in the urethra tissue. A muscle layer had a higher temperature (28.3 ℃) than mucosal (23.4 ℃) and submucosal layers (25.5 ℃). MT staining revealed no heat-induced collagen and muscle damage. Both control and treated groups showed the equivalent thickness and area of the urethral mucosal layer. Therefore, the proposed numerical simulation can predict the appropriate irradiation condition (20 W for 15 s) for the SUI treatment with minimal temperature-induced tissue.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권9호
• /
• pp.1314-1321
• /
• 2006

The objective of this work was to study the effect of mixed culture solid substrate fermentation of C. tropicalis ZD-3 with A. niger ZD-8 on detoxification of cottonseed meal (CSM), and to investigate the effect of fermentation period, proportion of CSM in substrate, sodium carbonate, minerals and heat treatment on the reduction of free gossypol levels during mixed culture solid substrate fermentation of CSM. Experiment 1: Three groups of disinfected CSM substrate were incubated for 48 h after inoculation with either of the fungi C. tropicalis ZD-3, A. niger ZD-8 or mixed culture (C. tropicalis ZD-3 with A. niger ZD-8). One non-inoculated group was used as the control. Levels of initial and final free gossypol (FG), CP and in vitro CP digestibility were assayed. The results indicated that mixed culture fermentation was far more effective than single strain fermentation, which not only had higher detoxification rate, but also had higher CP content and in vitro digestibility. Experiment 2: CSM substrates were treated according to experimental variables including fermentation period, proportion of CSM in substrate, sodium carbonate, minerals and heat treatment, Then, the treated CSM substrates were inoculated with mixed culture (C. tropicalis ZD-3 with A. niger ZD-8) and incubated at $30^{\circ}C$ for 36 h in a 95% relative humidity chamber. After fermentation ended, FG and CP content of fermented CSM substrate was assayed. The results showed that the appropriate fermentation period was 36 h, and the optimal proportion of CSM in substrate was 70%. Addition of sodium carbonate to CSM substrate was beneficial for fermentative detoxification. Heat treatment could facilitate fermentative detoxification, and supplementation with minerals was instrumental in reducing gossypol levels during mixed culture solid substrate fermentation of CSM.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.53-59
• /
• 2013

Fe-TiC composite powder was fabricated via two steps. The first step was a high-energy milling of FeO and carbon powders followed by heat treatment for reduction to obtain a (Fe+C) powder mixture. The optimal condition for high-energy milling was 500 rpm for 1h, which had been determined by a series of preliminary experiment. Reduction heat-treatment was carried out at $900^{\circ}C$ for 1h in flowing argon gas atmosphere. Reduced powder mixture was investigated by X-ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM) and Laser Particle Size Analyser (LPSA). The second step was a high-energy milling of (Fe+C) powder mixture and additional $TiH_2$ powder, and subsequent in-situ synthesis of TiC particulate in Fe matrix through a reaction of carbon and Ti. High-energy milling was carried out at 500 rpm for 1 h. Heat treatment for reaction synthesis was carried out at $1000{\sim}1200^{\circ}C$ for 1 h in flowing argon gas atmosphere. X-ray diffraction (XRD) results of the fabricated Fe-TiC composite powder showed that only TiC and Fe phases exist. Results from FE-SEM observation and Energy-Dispersive X-ray Spectros-copy (EDS) revealed that TiC phase exists uniformly dispersed in the Fe matrix in a form of particulate with a size of submicron.

• 한국결정성장학회지
• /
• 제33권3호
• /
• pp.91-96
• /
• 2023

석영유리 도가니(QC)의 사용 중 기포 품질을 검증하기 위하여 적절한 가속 시험 방법을 제안하였다. 실제 Czochralski(Cz) 공정에서 얻어진 폐기물 도가니의 기포 상태를 분석하고 QC 시험편을 이용하여 온도, 압력, 시간을 변화시켜 최적의 열처리 조건을 제시하였다. Cz 공정에서 생성되는 유사한 기포 크기와 밀도로 제어하기 위해서는 1450℃, 0.4 Torr 및 40시간의 열처리 조건이 적절하였다. 특히 Cz 공정에서 적용하는 압력인 10~20 Torr보다 상대적으로 낮은 압력인 0.4 Torr를 선택함으로써 기포 형성 가속시험의 시간을 단축시킬 수 있었다. 열처리 온도를 1550℃ 높일 경우, Ostwald ripening 현상으로 인하여 기포가 커지고 밀도가 급격히 낮아지며, 결정화 발생으로 적절한 가속시험 조건은 아닌 것으로 판단하였다.

• Biomolecules & Therapeutics
• /
• 제23권3호
• /
• pp.290-295
• /
• 2015

Aging is defined as a collective process that alters organism's functional capacity and appearance over the course of life. Apart from an increase in susceptibility to many diseases, aging affects the cellular system that is responsible for decoding painful stimuli. Yet, aging-associated molecular mechanisms of pain perception remains elusive. Using Drosophila, we showed a decrease in temperature tolerance and a reduction in high temperature thermal avoidance with aging. Locomotor activity assay demonstrated that the age-dependent changes in heat nociception did not stem from the general decline in muscular activity. However, we identified pain-related gene expression alteration with aging. We anticipate that our findings would help opening a new window onto developing the optimal pain treatment for the elderly.