• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.79-84
• /
• 2009

Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within a compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation is associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in a turbocharger system. In this study, a expansion muffler with lids is devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler are investigated which are related to the unsteadiness of turbulence and pressure in the turbocharger system. A transfer matrix method is used to analyze the transmission loss of the muffler. A simple expansion muffler with lids is proposed for the reduction of high frequency component noise. Turbulence simulation is carried out by a standard k - ${\varepsilon}$ model. An optimal design condition of the muffler is obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise is achieved at the optimal design of the muffler as compared with the conventional muffler.

• 설비공학논문집
• /
• 제17권10호
• /
• pp.938-946
• /
• 2005

Shape optimization of internally finned circular tube has been peformed for periodically fully developed turbulent flow and heat transfer. The physical domain considered in this study is very complicated due to periodic boundary conditions both streamwise and circumferential directions. Therefore, Pareto frontier sets of a heat exchanger can be acquired by coupling the CFD and the multi-objective genetic algorithm, which is a global optimization technique. The optimal values of fin widths $(d_1,\;d_2)$ and fin height (H) are numerically obtained by minimizing the pressure loss and maximizing the heat transfer rate within ranges of $d_1=0.2\sim1.5\;mm,\;d_2=0.2\sun1.5\;mm,\;and\;H=0.2\sim1.5\;mm$. The optimal values of the design variables are acquired after the fifth generation and also compared to those of a local optimization algorithm for the same geometry and conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1215-1217
• /
• 2007

This paper is proposed a novel method to approximate the maximum power for a photovoltaic inverter system. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking(MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method will be named linear reoriented coordinates method(LRCM) with the advantage that Pmax and $V_{op}$ can be approximated using the same variable as the dynamic model without using complicate approximations or Taylor series. This paper is proposed MPPT using LRMC method using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.353-360
• /
• 2010

This study was carried out to investigate the possibility of solid particles as a stabilizing agent instead of surfactant for preparing emulsions in the cosmetics. The type of emulsions stabilized by solid particles was dependent on wettability of the particles for water and oil. The optimal conditions of emulsions stabilized by solid particles were determined with ratio of water and oil phase, polarity of oils and amount of stabilizers. In the foundation appling the optimal condition of emulsions stabilized by solid particles without surfactant, the stable emulsion type foundation was successfully prepared. As a result, this work indicates that emulsions stabilized by solid particles can be applied to make-up cosmetics.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.1-9
• /
• 2021

This article discusses the issue of optimizing controller design issues, in which the artificial intelligence (AI) evolutionary bat (EB) optimization algorithm is combined with the fuzzy controller in the practical application of the building. The controller of the system design includes different sub-parts such as system initial condition parameters, EB optimal algorithm, fuzzy controller, stability analysis and sensor actuator. The advantage of the design is that for continuous systems with polytypic uncertainties, the integrated H2/H∞ robust output strategy with modified criterion is derived by asymptotically adjusting design parameters. Numerical verification of the time domain and the frequency domain shows that the novel system design provides precise prediction and control of the structural displacement response, which is necessary for the active control structure in the fuzzy model. Due to genetic algorithm (GA), we use a hierarchical conditions of the Hurwitz matrix test technique and the limits of average performance, Hierarchical Fitness Function Structure (HFFS). The dynamic fuzzy controller proposed in this paper is used to find the optimal control force required for active nonlinear control of building structures. This method has achieved successful results in closed system design from the example.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1708-1717
• /
• 2023

The grade analysis of lead-zinc ore is the basis for the optimal development and utilization of deposits. In this study, a method combining Prompt Gamma Neutron Activation Analysis (PGNAA) technology and machine learning is proposed for lead-zinc mine borehole logging, which can identify lead-zinc ores of different grades and gangue in the formation, providing real-time grade information qualitatively and semi-quantitatively. Firstly, Monte Carlo simulation is used to obtain a gamma-ray spectrum data set for training and testing machine learning classification algorithms. These spectra are broadened, normalized and separated into inelastic scattering and capture spectra, and then used to fit different classifier models. When the comprehensive grade boundary of high- and low-grade ores is set to 5%, the evaluation metrics calculated by the 5-fold cross-validation show that the SVM (Support Vector Machine), KNN (K-Nearest Neighbor), GNB (Gaussian Naive Bayes) and RF (Random Forest) models can effectively distinguish lead-zinc ore from gangue. At the same time, the GNB model has achieved the optimal accuracy of 91.45% when identifying high- and low-grade ores, and the F₁ score for both types of ores is greater than 0.9.

• 한국환경농학회지
• /
• 제30권4호
• /
• pp.377-381
• /
• 2011

본 연구는 논에서 돈분 액비 활용시 담수 시기에 따른 암모니아 휘산량을 평가하였다. 담수 상태에서 돈분 액비 시용은 142.0 mg/$m^2$ 의 암모니아 휘산량을 보인 반면, 돈분액비시용 1일 및 3일 후 담수시 암모니아 휘산량은 29.6, 25.4 mg/$m^2$ 였다. 그리고 담수 상태에서 돈분액비 시용이 돈분액비 시용 후 담수에 비해 높은 암모니아 휘산량을 보인 것은 암모니아가 토양교질에 흡착되지 않고 수중에 높은 농도로 존재하기 때문인 것으로 나타났다. 따라서 논에서 돈비 액비 활용시 암모니아 휘산량 저감에 의한 질소 이용도 향상을 위해서는 돈분액비 살포 최소 1일 후 담수하는 것이 좋을 것으로 판단된다.

• 한국발생생물학회지:발생과생식
• /
• 제18권2호
• /
• pp.117-125
• /
• 2014

Vitrification method is widely used in oocyte cryopreservation for IVF but the birth rates are lower than that of the fresh oocyte. One of the known main reasons is structural instability of meiotic spindle and chromosome systems of mature oocyte. To get the best way for keeping competence of matured oocytes, we studied the best conditions for vitrification focused on equilibration times. The mature oocytes were underwent vitrification with current popular method and analyzed the survival rates, microtubule stability and DNA integrity. The survival rates of recovered oocyte are almost same between groups and are more than 93%. The structural configuration of meiotic spindle was well kept in 10 min equilibration group and the stability rate was almost same with that of control. The chromosomal breakdown was observed in all experimental groups, but the chromosomal stability was higher in 10 min equilibration group than the other groups. The 10 min equilibration group showed best condition compared with the other groups. Based on these results, the equilibration time is one of the key factors in successful keeping for competence of mature oocyte. Although, more fine analysis about the effects of physical stress on oocyte during vitrification is needed to define the optimal condition, it is suggested that the optimal equilibration time to get competent oocyte in mouse is 10 min. Information acquired this study may provide insight into intracellular structural events occurring in human oocytes after vitrification and application for cryopreservation of human oocyte.

• 한국미생물·생명공학회지
• /
• 제17권4호
• /
• pp.349-357
• /
• 1989

전분질을 당화시킬 때 유리구와 같은 분쇄마찰매체 (attrition-milling media)를 첨가하여 교반함으로써 생전분질 -효소 현탄액에 분쇄마찰효과를 주어 전분입자를 구조적으로 변화시켜 당화를 현저히 촉진시키는 적절한 무증자 당화법을 연구해오고 있다. 본 연구는 전분질의 무증자 당화에 적합한 고효율 및 저에너지 소모형 분쇄마찰매체 함유 효소반응기의 개발을 목포로, impeller를 갖춘 agitated bead type bloattritor를 설계 제작하여 그 효용성을 검토하였다. 무증자 옥수수전분을 기질로 당화에 적합한 bioattritor의 최적 조작조건을 검토하였고, 일정한 탄성계수를 지닌 spiral spring coil을 내장한 torque 측정장치를 개발하여 부하되는 torque 및 분쇄마찰 매체의 교반에 소요되는 energy를 측정하였고 중요 변수의 영향을 검토하였다. 또한 energy 소모와 생 전분의 효소당화 촉진효과와의 상관관계를 규명하였으며, bioattritor의 경제성을 전망하였다. 전분질의 최적 당화조건에서 분쇄마찰매체의 교반에 소요되는 동력은 1.53watt/ι로서 매우 적었다. 분쇄마찰매체 함유 효소반응계는 에너지 절약형 공정으로 사료되며, 이를 이용한 무증자 전분 효소당화공정의 산업적 활용 전망이 예상된다.

• Journal of Microbiology and Biotechnology
• /
• 제16권2호
• /
• pp.226-231
• /
• 2006

Several white-rot fungi are able to produce extracellular lignin-degrading enzymes such as manganese peroxidase (MnP), lignin peroxidase (LiP), and laccase. In order to enhance the production of laccase and MnP using Trametes versicolor KCTC 16781 in suspension culture, the effects of major medium ingredients, such as carbon and nitrogen sources, on the production of the enzymes were investigated. The decolorization mechanism in terms of biodegradation and biosorption was also investigated. Among the carbon sources used, glucose showed the highest potential for the production of laccase and MnP. Ammonium tartrate was a good nitrogen source for the enzyme production. No significant difference in the laccase production was observed, when glucose concentration was varied between 5 g/l and 30 g/l. As the concentration of nitrogen source increased, a lower MnP activity was observed. The optimal C/N ratio was 25 for the production of laccase and MnP. When the concentrations of glucose and ammonium tartrate were simultaneously increased, the laccase and MnP activities increased dramatically. The maximum laccase and MnP activities were 33.7 U/ml at 72 h and 475 U/ml at 96 h, respectively, in the optimal condition. In this condition, over 90% decolorization efficiency was observed.