• ETRI Journal
• /
• 제32권2호
• /
• pp.241-247
• /
• 2010

We propose and experimentally demonstrate a service-aware optical transport system. The proposed service-aware optical transport system makes a flow based on service type and priority of traffic. The generated flow is mapped to a corresponding sub-${\lambda}$ for transport over an optical network. Using sub-${\lambda}$ provided by the centralized control plane, we could effectively provide quality-of-service guaranteed Ethernet service and best-effort service simultaneously in a single link. The committed information rate (CIR) traffic and best-effort traffic are assigned to different sub-${\lambda}s$. The bandwidth of the CIR traffic is guaranteed without being affected by violation traffic because the bandwidth is managed per each sub-${\lambda}$. The failure detection time and restoration time from a link failure is measured to be about 60 ${\mu}s$ and 22 ms, respectively, in the ring network. The measured restoration time is much smaller than the 50 ms industry requirement for real-time services. The fast restoration time allows the proposed service-aware optical transport system to offer high availability and reliability which is a requirement for transport networks.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.164-172
• /
• 2021

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system's design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distortion is better than 0.18%, and the energy concentration in the 10-㎛-radius surrounding circle reaches about 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.354-361
• /
• 2023

We present the optical design and experimental verification of resolving performance of a 3× long wavelength infrared (LWIR) zoom camera for drones. The effective focal length of the system varies from 24.5 mm at the wide angle position to 75.1 mm at the telephoto position. The design specifications of the system were derived from ground resolved distance (GRD) to recognize 3 m × 6 m target at a distance of 1 km, at the telephoto position. To satisfy the system requirement, the aperture (f-number) of the system is taken as F/1.6 and the final modulation transfer function (MTF) should be higher than 0.1 (10%). The measured MTF in the laboratory was 0.127 (12.7%), exceeds the system requirement. Outdoor targets were used to verify the comprehensive performance of the system. The system resolved 4-bar targets corresponding to the spatial resolution at the distance of 1 km, 1.4 km and 2 km.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.103-109
• /
• 2003

기존의 Multiple-Subcarrier변조 방식에 4-차원(4-D)신호를 이용한 Optical Wireless통신 방식을 제안하였다. 4-D 신호는 신호파형 최적화 기술 (OSW, Optimization Technique of Signal Waveforms)을 이용하여 유도하고 Multiple-Subcarricr의 block coder에 적용함으로써 출력 신호점 간의 Euclidean distance를 최대화하였다. 그 결과 고정 dc 바이어스를 부가한 상태에서 시스템에서 요구되는 Normalized power를 QPSK에 비해 3 dB, Reserved Subcarrier 나 Minimum Power에 비해 최대 3.3 dB 를 각각 절감하였고 normalized bandwidth 1.125 ∼ 1.25의 범위에서 QPSK에 비해 평균 3 dB, Res. Subcarrier 방식에 비해 2 ∼ 4 dB, Min. Power 방식에 비해 0 ∼ 3 dB를 각각 절감하였다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.614-618
• /
• 2015

This paper described an off-axis head-mounted display system. It is composed of a 7-piece coaxial relay lens group and a freeform surface combiner. This configuration has a simple structure and a wide field of view (FOV). In this design, a freeform surface is chosen as the combiner, to simplify the structure and attain good image quality. We generated this freeform surface by considering both coordinates and normals of discrete data points. Moreover, we realize a coaxial structure in the relay lens group, which is compact and benefits from a loose tolerance requirement. The HMD system we finally realized has a 40° × 30° FOV and 15-mm exit pupil diameter.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.128-135
• /
• 2015

현재까지 국내에서 궤도 상의 자국 우주 물체를 지상에서 추적할 수 있는 시스템은 한국천문연구원에서 개발 중인 우주물체 전자광학 감시체계가 유일하다. 이 시스템은 자국 저궤도 위성의 궤도력 산출과 현재 대한민국에 할당된 정지궤도 영역을 감시하는 기능을 보유하고 있다. 그러나 관측 대상이 확대되고 운영 조건의 변화에 따라, 국내 정지궤도 영역 상시감시가 가능한 저예산 보조관측 시스템은 전체 우주 감시시스템의 매우 효율적인 운영을 지원할 수 있다. 따라서 저예산 시스템의 관측정밀도 저하에 따른 궤도력 산출의 위험도 증가를 억제할 수 있는, 지구 정지궤도 영역 상시 감시용 전용 광학관측 시스템의 요구사항을 분석했다.

• 한국광학회지
• /
• 제32권4호
• /
• pp.153-162
• /
• 2021

본 논문에서는 적외선 탐색 및 추적 기능을 수행하는 광각 주사 광학계와 표적의 전자광학 추적 기능을 수행하는 협/중시계 광학계의 기능이 통합된 가변 F/수 삼중 배율 적외선 광학계를 설계하였다. 기존 광각 주사 광학계를 기반으로 무한 초점 광학계를 전단부에 설계하여 협/중시계 기능을 수행할 수 있는 광학계를 구현하였다. 시스템 성능 분석을 통해 성능 목표를 설정하고, 이를 바탕으로 광학계 설계를 위한 설계 사양을 도출하였으며, F/수가 다른 광학계를 추가하기 위해 조리개 크기를 줄여주는 웜 스톱을 적용하였고, 설계된 광학계에 적합하도록 세부 형상을 설계하였다. 설계 완료된 협/중시계 광학계 설계 결과를 분석하여 MTF (modulation transfer function)와 같은 목표 성능을 만족하는 것을 확인하였으며 운용성을 고려하여 비열화와 표적 거리에 따른 초점 렌즈군의 이동량을 분석하였고, 이를 통해 광역 탐색 및 추적 기능과 정밀 추적 및 3차원 정보 획득 기능이 통합된 단일 광학 시스템의 구현이 가능함을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.296-299
• /
• 2013

A low density lipoprotein (LDL) cholesterol testing device, structured with serial reflected face-to-face mirror (SRM) allowing spectrophotometry measurements, is presented. The spectrophotometry has been employed to measure the amount of light that a sample absorbs, but it generally should have had path length longer than 10 mm to secure enough sensitivity. Such requirement of path length has often been problematic in implementing a thin type of lab on a disc (LOD). We developed the SRM system which was implemented in a detection chamber with 1.4mm thickness, providing path length longer than 10mm, and thus straightforwardly being applicable to LOD as thin as a compact disc. The experimental results show that the SRM system gives not only a much thinner design compared to the conventional spectrophotometry-based LOD but also a comparable performance to already commercialized spectrometers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.684-687
• /
• 2002

In optical disk drive(ODD), pickup actuator, which comprises a key part of an optical disk drive equipment. must be thin. compact, and high sensitive. Low tilt is also an important requirement for the actuator, since optical disks are to high density. This tilt occurs from around the axis parallel to the tangential and radial direction of the disk. The main reason of the moment is the coupling effect between focus driving system and tracking driving system. This paper analyzed tut quantity due to focusing and tracking force through coupled fields analysts with electromagnetic analysis and structural analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1293-1296
• /
• 2007

An amenity requirement of the passenger using public traffic is rising continuously, and also The Ministry of Environment established "Indoor air quality management guidelines in public facilities(Dec. 2006)". To satisfy such requirement, the photoplasma device to decrease VOCs(Volatile Organic Compounds) and suspended bacillus is applied to the underframe mounted HVAC(Heating, Ventilating and Air-Conditioning) system for train. Air purifying method of photoplasma device is optical and chemical reaction that UV-light(wavelength less than 280nm) react with catalyst material(TiO2). To analyze the efficiency of photoplasma in this study, we measured the requirement time for toluene to decease down to 0.3ppm after contaminating the passenger cabin for train to toluene 1ppm.