• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.

• Transactions of the Society of Information Storage Systems
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2015

The selective frequency analysis method is suggested in the holographic data storage system with the nyquist aperture to reduce the size of hologram. The image filter was designed with many different methods to improve the bit error rate caused by the nyquist aperture. In previous the methods of image restoration for HDS, an iteration time and a highly precise point spread function were necessary. In this paper, we describe the optical system with analytic method. Thereby, we expect our result help the researchers to design the filter.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.60-61
• /
• 2000

홀로그래픽 데이터 저장 장치(holographic data storage)는 1960년대에 이미 아이디어가 출현하였고, 1990년대에 들어서 SLM(spatial light modulator)과 CCD(charge coupled device) 등 관련 기술의 발달과 함께 향후 늘어날 대용량 저장 장치 시장에 대한 전망 등에 힘입어 주목받기 시작하였다. 홀로그래픽 데이터 저장 장치의 중요한 장점은 대용량의 정보를 고속으로 처리할 수 있고, 특히 페이지 단위로는 병렬 접근이 가능하다는 것인데, 이를 위해서 반드시 해결되어야 할 것이 픽셀 매치(pixel-match)이다. (중략)

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.163-168
• /
• 2006

Small form factor optical pickup (SFFOP) corresponding to BD specifications is strongly proposed for the next-generation portable storage device. In order to generate SFFOP, small sized optical pickup has been fabricated. We have developed a small sited optical pickup that is called the integrated optical pickup (IOP). The fabrication method of this system is mainly dependant on the use of the wafer based micro fabrication technology, which has been used in MEMS process such as photolithography, reactive ion etching, wafer bonding, and packaging process. This approach has the merits for mass production and high assembling accuracy. In this study, to generate the small sized optical pickup for high recording capacity, IOP corresponding to BD specifications has been designed and developed, including three main parts, 1) design, fabrication and evaluation of objective lens unit, 2) design and fabrication of IOP and 3) evaluation process of FES and TES.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.318-330
• /
• 2002

This paper discusses the design and implementation of a video server which uses tertiary device, such as magneto-optical jukebox or tape library, as a source of media archiving. In order to handle the tertiary device in the framework of disk-based stream service model, a sophisticated streaming model is required for server and it should consider the device-specific performance characteristics of tertiary storage. We have carefully designed the streaming mechanism for server whose key functionalities include stream scheduling, disk caching and admission control. The proposed system has been implemented on Windows 2000 platform which is equipped with a magneto-optical jukebox. The design principles of the server are validated with the experiments and the performance characteristics is analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.19-24
• /
• 2001

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.61-66
• /
• 2012

In HDD industry, many technologies have been developed and investigated as means to increase the areal density of drives. Especially, heat assisted magnetic recording (HAMR) system has been considered as the next generation storage device. Most of the HAMR systems use near field optics as heating mechanism. Therefore, light delivery system is indispensable. We considered the light delivery system with laser diode (LD) mount and optical fiber. Mass and stiffness of the HAMR system using these LD mount and optical fiber are changed. The mass and stiffness of the HAMR system affects the slider dynamic behavior. It is necessary to analyze touch down (TD) and take off (TO). And, we performed the TD-TO experiment with HAMR suspension. Finally, we analyzed the result of TD-TO experiments. And we suggested the design of HAMR suspension to improve TD-TO performance.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.23-33
• /
• 2012

We studied simultaneously the electronically written data affected in the use of thermal transfer discs and the recoding strategy between recoding drives for the stable long term preservation of optical discs which are commonly used in an electronic data storage device. The most important thing in the archiving preservation might be a choice of a device, however the use of thermal transfer recording discs is not good for long term data preservation because the thermal effect on the recoding data is critical which means that the data are recorded not under best condition but under bad condition. We inspect the strategies of recoding data from 12 brands of optical discs and drives of 7 brands and it turns out the recoding strategy is needed first for the long term preservation of electronic recording data. Thus, without affecting data quality and deformation of optical discs, the choice of optimal disc and drive in recoding data will be a solution for the long term preservation of recoding data.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.674-685
• /
• 1999

MIDAS-II는 한국전자통신연구원에서 개발한 바다 DBMS의 저장 시스템이다. MIDAS-II 볼륨은 데이터의 논리적 저장 단위인 파일을 저장하는 영역을 가리킨다. 본 논문에서는, MIDAS-II가 대용량 멀티미디어 데이터 서버의 저장 시스템으로 기능하도록 광 디스크 쥬크박스 또는 테이프 라이브러리와 같이 복수 개의 저장 매체 (platter , 예를 들어 디스크 또는 카트리지 테이프)로 구성된 Tera 바이트 급의 3창 저장 장치를 장착할 경우 이를 위한 볼륨 구조의 설계 및 구현에 대해 기술한다. 본 논문에서 제안하는 볼륨 구조는 3차 저장 장치 접근 시 성능 제고를 위하여 디스크 캐쉬 영역을 두고 있으며, 3차 저장 장치의 저장 매체별 관리 기능을 제공한다. Abstract MIDAS-II is the storage systemfor BADA DBMS developed at ETRI. A volume of MIDAS-II is the area where the files, the logical unit for storing data, are stored. This paaper describes the design and implementation of a new MIDAS-II volume structure for the tertiary storage device such as an optical disk juke box or a tape library equipped with multiple platters(disks or cartridge tapes, for example ). Incorporating thetertirary storage device of the order of tera bytes into MIDAS-II enables it to function as a storage system for a massive amount fo multimedia eata server. The volume structure for the tertiary storage device proposed in this paper features disk caching for performing improvement and direct control of theindividual platter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1545-1551
• /
• 2002

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.