• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• ETRI Journal
• /
• 제35권2호
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.255-259
• /
• 2015

We have proposed and experimentally verified a pulse-width modulation (PWM) generator which directly generated a PWM signal in the optical domain. Output waveforms were clear at the repetition rate of 16 MHz; the duty cycle (DC) was from 14.7% to 72.1%; and the DC-control resolution was about 4.399%/dB. The PWM generator' operation principle is based on the injection-locking property of a single-mode Fabry-$P{\acute{e}}rot$ laser diode (SMFP-LD). The SMFP-LD, which has a self-locked mode wavelength at ${\lambda}_{PWM}$, was used to detect the power of the injection-locking signal (optical analog input). If the analog input power is high, the SMFP-LD is locked to the wavelength of the input signal ${\lambda}_a$ and there is no output after an optical bandpass filter (OBF). If the analog input power is low, the SMFP-LD is unlocked and there is output signal at ${\lambda}_{PWM}$ after the OBF. Thus, the SMFP-LD plus the OBF provide digital output for an analog input. The DC of the output PWM signal can be controlled by tuning the power of the analog input.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1061-1067
• /
• 2005

The resonant frequency modulation of $YBa_2Cu_3O_{7-x}$ meander lines has been investigated as functions of optical pulse energy and temperature by using a network analyzer. The frequency-domain measurements are performed by controlling both the resonant frequency and the frequency width. The meander lines, configured in a microstrip geometry, are illuminated by optical pulses from an actively mode-locked Nd:YAG laser. The variation of the resonant frequency shows a quadratic dependence on the reduced optical pulse energy $P/P_c$, where $P_c$ is defined as the critical optical pulse energy at which resonance signal has disappeared. As for the dependence on temperature, the results are in good agreement with the previously reported data.

• ETRI Journal
• /
• 제35권5호
• /
• pp.927-930
• /
• 2013

We propose a visible light communication system in which the color and brightness are controllable. Pulse width modulation and variable pulse position modulation (VPPM) schemes are used to control the color and brightness, respectively. A digital algorithm to decode VPPM signals is suggested and implemented. A seamless transmission is observed in a testbed experiment under various environmental conditions. The proposed scheme can be applied to emotional-lighting-based wireless optical communication.

• 센서학회지
• /
• 제30권4호
• /
• pp.196-203
• /
• 2021

In this study, an optical identification system was developed, wherein visible light is used to transmit the interrogating signal, and infrared is used to send the response signal. In the reader, visible light from a light emitting diode (LED) array was modulated via modified pulse width modulation for flicker-free illumination and dimming control. Moreover, the duty factor of the dimming control time was employed to control the illumination from the LED. In the transponder, the spike signal in the output of the high-pass filter was utilized to recover the interrogating signal while preventing interference from the 120-Hz noise from adjacent lighting lamps. The illumination was controlled in 26-86% range of the constant wave LED illumination by changing the duty factor from 20% to 90%. This configuration is advantageous for the construction of optical identification systems for automatic security check and car fare calculation at toll gates or parking facilities.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.305-311
• /
• 2013

Using receiver eigenmodes, we perform a time-dependent analysis of optical receivers whose optical inputs are corrupted by the amplified spontaneous emission. We use Gaussian receivers for the analysis with Gaussian input pulses. We find the number of contributing eigenmodes increases as the measurement time moves from the pulse center towards the pulse edges at the output of the optical receiver's electrical filter. This behavior is dependent on the bandwidth ratio between the optical and the electrical filters as well as the input pulse's time width.

• 대한전자공학회논문지SD
• /
• 제48권12호
• /
• pp.52-57
• /
• 2011

본 논문에서는 $0.18{\mu}m$ CMOS 공정을 이용하여 초고속 디지털 인터페이스 응용을 위한 4-채널 광 송신기를 구현하였다. 특히 VCSEL 드라이버 회로 내에 피드포워드 기법을 사용하였고, 프리앰프 회로 내에 펄스 폭 컨트롤 기법을 사용함으로써, 채널 당 2.5-Gb/s 동작속도를 가지며, 4mA의 바이어스 전류 및 $2{\sim}8mA_{pp}$의 모듈레이션 전류를 구동하고, 펄스 폭 왜곡을 줄이는 효과를 갖는다. 4-채널 광 송신기 어레이 칩의 면적은 $1.0{\times}1.7mm^2$ 이며, 단일 1.8V 전원전압에서 최대전류 구동 시 채널당 35mW의 낮은 전력을 소모한다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• 대한전자공학회논문지SD
• /
• 제43권11호
• /
• pp.14-18
• /
• 2006

광간섭계는 물체의 기하학적 구조 및 의료 계측등 다양한 분야의 광계측에서 매우 일반적으로 사용된다. 이러한 광간섭계에서 광지연단은 측정대상의 기준을 위해 사용되고. 광간섭계의 계측속도는 광지연단에 의해 제한된다. 본 논문에서는 고속 광지연단을 위해 기존의 기계적 방식을 배제하고, 광학적 방식의 광 간섭계를 구성하였다. 고속 광간섭계의 구성은 1304nm의 10GHz광원을 이용하였으며, 광지연단으로 광위상변조기와 광섬유를 이용하여 안정적이고 고속의 광 간섭계를 구성하였다. 구성된 광간섭계는 광위상변조기의 변조전압, 변조주파수에 의해 광지연시간을 가변할 수 있으며, 10MHz 반복율에 대해 11ps의 광지연시간을 얻을 수 있었다.