• 제목/요약/키워드: Optical propagation

검색결과 507건 처리시간 0.029초

고속광통신망용 새로운 WDM/TDM 프로토콜 (A new WDM/TDM protocol for very high speed optical networks)

  • 이상록;이성근;박진우
    • 전자공학회논문지A
    • /
    • 제33A권2호
    • /
    • pp.50-58
    • /
    • 1996
  • This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.

  • PDF

Propagation Properties of a Partially Coherent Flat-Topped Vortex Hollow Beam in Turbulent Atmosphere

  • Liu, Dajun;Wang, Yaochuan;Wang, Guiqiu;Yin, Hongming
    • Journal of the Optical Society of Korea
    • /
    • 제20권1호
    • /
    • pp.1-7
    • /
    • 2016
  • Using coherence theory, the partially coherent flat-topped vortex hollow beam is introduced. The analytical equation for propagation of a partially coherent flat-topped vortex hollow beam in turbulent atmosphere is derived, using the extended Huygens-Fresnel diffraction integral formula. The influence of coherence length, beam order N, topological charge M, and structure constant of the turbulent atmosphere on the average intensity of this beam propagating in turbulent atmosphere are analyzed using numerical examples.

Characteristics of THz Pulse Propagation on Teflon Covered Two-Wire Lines

  • Jo, Jeong Sang;Jeon, Tae-In
    • Journal of the Optical Society of Korea
    • /
    • 제19권6호
    • /
    • pp.560-565
    • /
    • 2015
  • We report efficient direct coupling of THz dipole antenna pulses onto air spaced two-wire transmission lines and Teflon covered two-wire lines. The air spaced two-wire lines show TEM mode propagation with very small group velocity dispersion (GVD) and relatively low attenuation. The Teflon covered two-wire lines showed comparatively much higher attenuation and GVD. However, the Teflon covered two-wire lines show a very good guiding property when the lines are curved. Although the lines are circled only 5.0 cm in diameter, there is no additional attenuation compared to straight the lines.

Perspectives on THz Time Domain Spectroscopy

  • Cheville, R.Alan
    • Journal of the Optical Society of Korea
    • /
    • 제8권1호
    • /
    • pp.34-52
    • /
    • 2004
  • Over the past decade the experimental technique of THz time domain spectroscopy (㎔- TDS) has proved to be a versatile method for investigating a wide range of phenomena in the ㎔ or far infrared spectral region from 100 ㎓ to 5 ㎔. This paper reviews some recent results of the Ultrafast ㎔ Research Group at Oklahoma State University using ㎔-TDS as a characterization tool. The experimental technique is described along with recent results on ㎔ beam propagation and how ㎔ beam profiles arise from propagation of pulse fronts along caustics. To illustrate how spatio-temporal electric field measurements can determine material properties over a wide spectral range, propagation of ㎔ pulses through systems exhibiting frustrated total internal reflection (FTIR) are reviewed. Finally two potential metrology applications of ㎔-TDS are discussed, thin film characterization and non-destructive evaluation of ceramics. Although ㎔-TDS has been confined to the research laboratory, the focus on application may stimulate the adoption of ㎔- TDS for industrial or metrology applications.

Focal Plane Irradiance from MCF in Millimeter Wave Systems

  • Jong Gil Lee
    • 한국정보통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.529-534
    • /
    • 2004
  • 밀리미터파는 안개 또는 연기등에 의한 시계불량 환경에서의 고해상도 거리 및 영상정보 획득에 사용될수 있으며 광대역 통신에서도 활용되고 있다. 그러나 밀리미터파 시스템의 성능평가를 위해서는 밀리미터파 전파에 관한 이론 및 실험적인 고찰을 필요로 한다. 밀리미터파의 강도변화 및 MCF는 대기현상이 밀리미터파 전파에 미치는 영향을 표시한다. 본 논문에서는 QOM 기법을 이용하여 기상자료에 의하여 얻어질수 있는 MCF로부터 안테나 초점평면에서의 강도분포를 효율적으로 구할수 있는 실질적인 방법을 제안하였다.

Wide Angle BPM 을 이용한 광도파로열 격자 파장 필터의 해석 (Analysis of Arrayed Waveguide Grating Waveglength Filter using Wide Angle Beam Propagation Method)

  • 박준오;정영철
    • 대한전자공학회논문지SD
    • /
    • 제39권2호
    • /
    • pp.46-55
    • /
    • 2002
  • 광도파로열 격자(AWG :Arrayed Waveguide Grating) 파장 필터는 전광 네트웍(All Optical Network)을 실현하는 매우 중요한 핵심 소자 중에 하나이다. 광도파로열 격자 파장 필터와 같은 광도파 소자를 해석 및 설계시 수학적인 해석이 필요하며, 가장 대표적인 방법은 BPM(Beam Propagation Method)이다. 본 논문에서는 Paraxial BPM과 Wide Angle BPM을 InP/InGaAsP/InP 광도파로열 격자 파장 필터 해석에 적용시켜 정화도의 차이를 고찰해 보았다. WA-BPM을 구현하기 위하여 저차의 Pade Approximant를 적용하였다. 광도파로열 격자 파장 필터의 SLL(Side Lobe Level)과 삽입손실(Insertion Loss)을 비교하여 분석하였다. 광도파로열 격자 파장 필터를 정확하게 해석 및 설계하기 위해서는 고차의 WA-BPM을 사용해야 함을 확인하였다.

Effects of Drying Temperature on the Optical Properties of Solution Derived (Pb, La)$TiO_3$ Thin Films

  • Yoon, Dae-Sung;Kim, Sung-Wuk;Koo, Jun-Mo;Jiang, Zhong-Tao
    • The Korean Journal of Ceramics
    • /
    • 제1권4호
    • /
    • pp.191-196
    • /
    • 1995
  • Using sol-gel processing method, thin films of lathanum modified lead titanate(PLT) on Corning 7059 glass were prepared. A differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate residual organices in them. The heat-treated films were characterized by X-ray diffraction(XRD). Microstructures of the films were observed by a scanning electron microscope (SEM). Optical properties of the films were determined by a UV-VIS spectrophotometer. The waveguiding properties and optical attenuation were measured with the end coupling method and the cut back method. Effects of the drying conditions on the transmittance and the propagation loss of the films were investigated. Experimemtal results showed that the content of residual organics in the film decreased as the drying temperature of the film increased. As the La content of the film increased, the grain size decreased and the transmittance increased. The transmittances of the films increased with the increasing of the drying temperature. The propagation losses in the film decreased as the drying temperature increased.

  • PDF

The Analysis of tight Coupling and Propagation for a Composite Fiber-Dielectric Slab with a Conductor Cladding

  • Kwon, Kwang-Hee;Song, Jae-Won;Kim, Jeong-Hoon;Park, Euy-Don;Son, Seok-Woo
    • Journal of the Optical Society of Korea
    • /
    • 제7권1호
    • /
    • pp.20-27
    • /
    • 2003
  • A theoretical presentation of evanescent coupling is offered with respect to the refractive indexes between a side-polished optical fiber and an infinitely planar waveguide with a conductor cladding (PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with the perfect conductor (PEC) on one side. The behavior of the distributed couple. is examined using a coupled mode model, which takes account of the two dimensions of the waveguide configuration. The coupling and propagation of light were found to depend on both the relationship between the refractive index values of each structure and the configuration of the side-polished fiber used in the PWGCC. The spreading of light in the unconfined direction of the PWGCC is described in terms of a simple geometrical interpretation of the synchronization condition that is in agreement with a previous investigation of the problem based on the coupled-mode theory (CMT). The power of the light propagation in the fiber decreased exponentially along the fiber axis as it was transferred to the PWGCC, where it was carried away.

Sensitivity and Error Propagation Factors for Three-Parameter Ellipsometry

  • Ihm, Hye-Ran;Chung, Gyu-Sung;Paik, Woon-Kie;Lee, Duck-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권11호
    • /
    • pp.976-980
    • /
    • 1994
  • The sensitivity factors and the error propagation factors are defined for the three-parameter ellipsometry (TPE). The sensitivity factor is useful for understanding the nature of the TPE measurements in connection with determination of the optical properties and the thickness of a film. On the other hand, the error propagation factors provide a quantitative tool for predicting the optimum condition for TPE experiments. Their usefulness is demonstrated for the passive film formed on nickel in aqueous solution.

Effect of a Conductor Cladding on a Dielectric Slab for Coupling with a Side-polished Fiber

  • Kwon, Kwang-Hee;Song, Jae-Won
    • Journal of the Optical Society of Korea
    • /
    • 제7권3호
    • /
    • pp.180-187
    • /
    • 2003
  • A theoretical presentation by using a three-dimensional finite difference beam propagating method (3-D FD-BPM) for the evanescent coupling is offered with respect to the refractive indexes between a side-polished optical fiber and an infinitely planar waveguide with a conductor cladding (PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with a perfect conductor (PEC) on one side. The coupling and propagation of light are found to depend on both the relationship between the refractive index values of two structures and the configuration of the side-polished fiber used in the PWGCC. The spreading of light in the unconfined direction of a PWGCC is presented with the distribution of electric fields in xy - plane and the absolute amplitude of electric fields along the x and y axis. The power of the light propagation in a fiber decreases exponentially along the fiber axis as it is transferred to the PWGCC, where it is carried away.