• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1774-1777
• /
• 1997

As factory automation is required, using the vision system is also essential. Especially, the pateh planning of parts with J-lead on PCB plays a import role of whole automation. Path planning is required because J-lead is scatteed compaed to L-lead on PCB. Therefore, in this paper, we propose path planning of part inspection with J-lead to use Hopfield Model(TSP : Traveling Salesman Problem). Then optical system suited to J-lead inspection is designed and the algorithm of J-lead solder joint and part inspection is proposed.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.3-8
• /
• 2023

Multi-domain optical transport networks are not fundamentally interoperable and require an integrated orchestration mechanism and path provision mechanism at the entire network level. In addition, ensuring network survivability is one of the important issues. MPLS-TP (Multi-Protocol Label Switching-Transport Profile) defines various protection/recovery methods as standards, but does not mention how to calculate and select protection/recovery paths. Therefore, an algorithm that minimizes protection/recovery collisions at the optical circuit packet integrated network level and calculates and sets a path that can be rapidly protected/recovered over the entire integrated network area is required. In this paper, we proposed an algorithm that calculates and sets up a path that can be rapidly protected and restored in a T-SDN network composed of multiple ring-mesh topology.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.132-139
• /
• 2008

In scanning laser optical tweezers, high speed scanning stages are used to manipulate a laser beam spot. Due to the inertia of the stage, the output scanning signal decreases with increased frequency of the input signal. This discrepancy in the signals is difficult to observe since most of the energy from the laser beam is blocked out to avoid CCD damage. In this paper, we propose two methods to alleviate these problems. Firstly, frequency responses of piezo stages are measured to analyze the signal drops and the input signal is compensated accordingly. Secondly, an overlay of the scanning path is drawn on the live monitoring screen to enhance the visibility of the scanning path. The result is a drop-compensated scanning with clear path view.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.270-274
• /
• 2020

In this study, a read-out integrated circuit (ROIC) that can be applied to a colorimetry-based optical sensor for analyzing total phosphorus and total nitrogen was developed and characterized. The proposed ROIC minimizes the effect on temperature fluctuation, improves sensitivity, and extends the dynamic range by utilizing a dual optical path and feedback control circuit. Using a dual optical path makes it possible to calibrate the output signal of the optical sensor automatically, along with the temperature fluctuation. The calibrated voltage is fed back into the measurement stage; thus, the output current of the measurement is adaptively controlled. As a result, the sensitivity and dynamic range of the proposed ROIC are improved. Finally, a total-phosphorus analysis was conducted by utilizing the ROIC. The ROIC was found to operate stably over a wide temperature range.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.552-554
• /
• 1995

In long-haul high speed optical communications, the distance between a transmitter and a receiver depends on the amount of light coupled to a single mode optical fiber from the laser diode(LD) as well as the LD characteristic itself. And the transmitter module must have long lifetime. high reliability, and even simple structure. Such points have induced laser welding technique to be a first choice in opto-electronic module packaging because it can provide strong weld joint in a short time with very small coupling loss. In this paper, packaging considerations and characteristics for high speed LD modules are discussed. They include optical path design factors for larger aligning tolerance, and novel laser welding processes for component assembly. For low coupling loss after laser welding processes, the optical path for optimum coupling of a single mode optical fiber into the LD chip was designed with the GRIN lens system providing sufficiently large aligning tolerance both in the radial and axial directions. The measured sensitivity of the LD module was better than -33.7dBm(back to back) at a BER of $10^{-10}$ with a 2.5Gbps NRZ $2^{23}-1$ PRBS.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.25-31
• /
• 2013

Looking at the recent value change of users and the usage pattern of network users, it is changing from simple web information, one-way information acquisition and data transmission to increase of usage of multimedia, increasing demand for security and customization, and increasing demands for free mobility. Due to this change of demand, the services which were provided individually, developed into a form which is merged, the network also seems to develop into the combined network from the individual network for individual service, and the communication network control technology which is the core technology is also rapidly developing. To reflect the users' demands, the next generation network created the multi-layer network which is based on the WDM/IP transmission system and added the to make it easy to restructure. P-OTS (Packet-Optical Transport System) can be defined as a platform that combines SONET/SDH, Ethernet, DWDM, optical transport network (OTN) switching and reconfigurable optical add-drop multiplexers (ROADMs). In this paper, we suggested that the optimum path choice be performed through diversification of the PCE-based path selection using the information of various layers altogether in the multi-layer environment, compared with the established path selection method when the path was selected using the information of each layers.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.47-54
• /
• 2013

In this paper, the structural design of optical Internet is analyzed and by using UNI (User Network Interface) signaling protocol an optical transmission experiment was performed. The hierarchical structure of the basic optical Internet consists of the backbone network, the service network and the access network. The necessary functions for each layer were described as follows: Control structure of the optical transport layer, network operation and management structure, internetworking technology of sub networks, routing and signaling technology. By using UNI signaling protocol from OIF (Optical Internetworking Forum), the optical transmission in the proposed structure of the optical Internet network was experimented. By the traffic generation of LSP (Label Switched Path) data packets along the route-configuration was delivered to UNI. Finally, by showing the value of TCP (Transmission Control Protocol) packets the optical transmission was completely and successfully demonstrated.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.11-12
• /
• 2007

OVPN(Optical Virtual Private Network) based on DWDM(Dense Wavelength Division Multiplexing) backbone framework is considered as a promising approach for the future VPN. This paper proposes a new routing algorithm, called PMIPMR (Priority-based Minium Interference Path Multicast Routing) algorithm which finds an alternate route considering node priorities when the congestion is occurred in a network. The PMIPMR algorithm tries to improve blocking probability and wavelength utilization by avoiding congested path for potential future connection requests.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.265-274
• /
• 1994

This paper proposes a method of noninvasive reflectance light to measure the blood fractional volume (Vb) and oxygen saturation ($SO_2$) of biological tissue. We chose the red light of 660nm and infrared light of 880nm. In Vivo reflectance data were obtained by the physiological changes front the surface of the skin over the calf in human subject. The reflected light intensity from different layers within a biological tissue was measured by specially designed reflectometer to apply photon path diffusion model. The collected data represent the changes of blood (ractional volume and oxygen saturation at each reflected light wavelengths. The data evaluation was assessed by examining the slopes of the plotted indices for the changes in oxygen saturation and blood (ractional volume. The results presented in this paper claim that light reflectance can separately discriminate the change of blood volume and that of oxygenation in muscle and also in skin.