• 디지털융복합연구
• /
• 제17권8호
• /
• pp.229-235
• /
• 2019

인터넷을 비롯한 광대역 멀티미디어 수요가 폭발적으로 증가함에 따라 스마트폰, IPTV, VoIP, VOD, 클라우드 등의 새로운 서비스의 등장으로 유발된 데이터 통신량의 폭주로 가입자망의 고도화가 통신 산업에서 가장 큰 이슈가 되고 있다. 본 연구에서는 파장분할다중방식(Wavelength Division Multiplexing, WDM) 수동형 광가입자망(Passive Optical Network, PON)의 국사 광역화와 광코어 절감을 위한 1기가급 Reach Extender(RE) 기술에 대한 개발을 시도하였다. 특히, 시장 경쟁력을 강화하기 위하여 광부품의 저가화와 소형화, 집적화, 소비 전력 폭주를 대처하기 위한 저전력화 등을 고려하였다. 또한, 기존 PON망에 RE 기술을 이용하여 전송 거리 확장 기술 개발 및 광선로의 용량 증가 기술 개발을 통한 신뢰성 기술, 원격관리 기술을 통합하여 일괄 시스템 개발을 완료하였다. 개발 시스템을 이용하여 기존 상용 1G PON 장비들과의 시스템 연동을 기반으로 개발 시스템을 이용한 국사 광역화와 광코어 절감을 이룬 것에 그 가치를 둘 수 있다. 본 연구를 기반으로 10G PON 기술 개발에 대한 연구를 진행 중이다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.160-161
• /
• 2001

A diode laser system has been developed for the refractory glaucoma therapy. The diode lasers have merits in clinical usage including reduction of beam dispersion, higher absorption such as in melanin pigment, and lower complication in treatment. We present the system specification of laser diodes in 810mm with 3W power, which is delivered into the optical fiber core of 600${\mu}{\textrm}{m}$.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.22-27
• /
• 2009

Target design study to improve the quality of an accelerated proton beam from the interaction of a high-intensity short pulse laser with an overdense plasma slab has been accomplished by using a two-dimensional, fully electromagnetic and relativistic particle-in-cell (PIC) simulation. The target consists of a thin core part and a thick peripheral part of equivalent plasma densities, while the ratio of the radius of the core part to the laser spot size, and the position of the peripheral part relative to the fixed core part were varied. The positive effects of this core-peripheral target structure could be expected from the knowledge of the typical target normal sheath acceleration (TNSA) mechanism in a laser-plasma interaction, and were apparently evidenced from the comparison with the case of a conventional simple planar target and the case of the transversal size reduction of the simple planar target. Improvements of the beam qualities including the collimation, the forward directionality, and the beam divergence were verified by detailed analysis of relativistic momentum, angular directionality, and the spatial density map of the accelerated protons.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.294-298
• /
• 2009

In this paper we proposed a new Bragg grating waveguide in order to improve reflectivity and to achieve compactness. Bragg gratings with various thicknesses were engraved in the middle of the core layer with a length of 3 mm. For the sake of cost-effectiveness, the $3^{rd}$ order Bragg grating waveguides were fabricated via conventional photolithography. The maximum reflectivities for the fixed width waveguide of $6{\mu}m$ with the 0.1 and $0.3{\mu}m$-thick Bragg gratings were, -13.14 and -6.25 dB, respectively, and the Bragg wavelengths were 1562.28, 1564.10 nm, respectively. A slight increase in the Bragg grating thickness can result in a remarkable reduction in the length of the Bragg grating waveguide with a fixed reflectivity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.479-484
• /
• 2000

The topology optimization of electromagnetic systems is investigated and the TOPEM (Topology Optimization for Electromagnetic Systems) is developed using the finite element method (FEM). The design sensitivity equation for topology optimization is derived using the adjoint variable method. The proposed method is validated by applying it to the topology optimizations of a C-core actuator and an optical pickup actuator.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.34-41
• /
• 2009

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This task has substantially complicated several factors. For example, the size, geometry and features of the various vehicles which might enter the monitored zone is varied widely and therefore present various reflective characteristics. This study proposes the optimal specification and configuration of optical system and IR array sensor of blind spot detection system, and shows the results of the performance evaluation of developed system.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.82-86
• /
• 2013

The automotive weather strip has the functions isolating of dust, water, noise and vibration from outside. The core of weather strip is made of steel with stiffness. By using the wire formed as the core of weather strip, weight can be reduced as much as 35% by comparing with existing steel core. For this reason, forming wire is necessary to keep the zigzag shape as it is. The deformation which is occurred during forming process can be predicted and it can be used in case of manufacturing dies through CAE. In this paper, rolling process conditions are deduced and the springback amount is predicted after rolling process by using the simulation. The springback amount of product is measured by using optical microscope, and measurement result is compared with the simulation result of springback as the same condition. The suitable gap between dies to compensate springback after rolling process is predicted through simulation and it is used for manufacturing dies.

• 한국분말재료학회지
• /
• 제31권1호
• /
• pp.43-49
• /
• 2024

In this study, a core-shell powder and sintered specimens using a mechanically alloyed (MAed) Ti-Mo powder fabricated through high-energy ball-milling are prepared. Analysis of sintering, microstructure, and mechanical properties confirms the applicability of the powder as a sputtering target material. To optimize the MAed Ti-Mo powder milling process, phase and elemental analyses of the powders are performed according to milling time. The results reveal that 20 h of milling time is the most suitable for the manufacturing process. Subsequently, the MAed Ti-Mo powder and MoO₃ powder are milled using a 3-D mixer and heat-treated for hydrogen reduction to manufacture the core-shell powder. The reduced core-shell powder is transformed to sintered specimens through molding and sintering at 1300 and 1400℃. The sintering properties are analyzed through X-ray diffraction and scanning electron microscopy for phase and porosity analyses. Moreover, the microstructure of the powder is investigated through optical microscopy and electron probe microstructure analysis. The Ti-Mo core-shell sintered specimen is found to possess high density, uniform microstructure, and excellent hardness properties. These results indicate that the Ti-Mo core-shell sintered specimen has excellent sintering properties and is suitable as a sputtering target material.

• 한국통신학회논문지
• /
• 제30권6B호
• /
• pp.331-337
• /
• 2005

오늘날 사용자들의 네트워크 사용량은 인터넷 망의 공급을 앞질러 가고 있다. 따라서 단일 광섬유 하나의 잠재적인 대역폭이 큰 광 인터넷 기술은 꼭 필요한 기술로서 인식되고 그 연구가 활발히 진행되고 있다. 그 중 OBS 망은 기존에 제안되었던 기술보다 상용화 가능성이 매우 크다. 또한 최근에는 MPLS의 레이블 스위칭 개념을 도입한 Labeled OBS에 대한 연구가 진행되고 있다. 하지만 이러한 OBS 망은 데이터를 모아서 버스트 단위로 전송하므로, 하나의 버스트 손실이라도 망 전체의 성능에 큰 영향을 미치고, 어느 한 지점으로 트래픽이 집중하게 되면 채널을 예약하지 못한 버스트들은 모두 손실로 처리되어 엄청난 양의 데이터손실을 야기한다. 따라서 OBS 망에서 혼잡 제어를 통하여 혼잡 상황이 좋아질 때까지 트래픽의 유입을 제어할 필요성이 있다. 본 논문에서는 OBS 망의 혼잡 상황에 대하여 버스트 전송을 제어하는 방법을 이용하여 혼잡 상황에 효과적으로 대처하는 기법을 제안한다. 제안된 혼잡 제어 기법을 통해 OBS 망의 수율 저하를 최소로 하고, 버스트의 손실은 크게 줄였다.