• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.148-149
• /
• 2006

TFT-LCD BLU has been remarkably developed for a recent few years as TFT-LCD market is increased. Recently new BLU technologies and components are developed as more aggressively than before since TFT-LCD panel requires higher quality and resolution. Especially Samsung Electronics and LG Philips LCD of Korea are major LCD panel makers and the major optical materials of LCD BLU and panel for Samsung Electronics have been supplied by Samsung Cheil Industries. In this presentation introduction to main components of LCD BLU will be investigated details. Also characteristics and applications of optical polymers such as PMMA, PET etc for LCD display will be included and finally recent trends in optical materials for LCD BLU will be shown briefly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.4
• /
• pp.179-183
• /
• 1984

Only K=$log_2$N reference patterns called principal components are sufficient to identify one out of N characters, calculated by computer and fablicated. An incogerent optical correlator is used for correlation coefficient measurements and it is shown that that this method has better discrimination ability that analog measuments using matched filter.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.92-93
• /
• 2000

WDM전송망은 지금까지 주로 장거리 기간망에 점대점 형태로 적용되어 왔다. 그러나 최근 예측을 훨씬 상회하는 인터넷 수요의 폭발적 증가로 인하여 매트로 네트워크 및 가입자영역에 이르기까지 WDM전송망 구축의 필요성이 대두되고 있다. WDM네트워크 적용영역을 구분하면 아래와 같다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.451-452
• /
• 2006

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.105-110
• /
• 2000

Biosensors consist principally of two basic components, receptor and transducer. The transducer part of the sensor serves the signal transfer from the output domain of the recognition system. Optical method of transducer have many benefits, based on phenomena like emission and absorption. This paper will review the methode of optical transduction in brief and out some new development.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.895-897
• /
• 2008

ZnO films were fabricated using rf-magnetron sputter deposition process with different $N_2$ ambient. N-content in N-doped ZnO films was less than 1%. The wavelength of the highest intensity PL peak of N-doped ZnO was shifted to higher wavelength with increasing $N_2$ flow rate in the deposition ambient. These results indicated that the optical property of ZnO was significantly affected by the defect level created by doping with a very small amount of N.

• Journal of the Optical Society of Korea
• /
• v.11 no.1
• /
• pp.10-17
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer (MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we analyzed such potential phase errors in the optimized MTI.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.191-194
• /
• 2002

In optical pick-up, optical components such as objective lens, collimator, mirror, laser diode and photo diode are mounted on the pick-up base. These components must keep their original position during operation for proper transmittance of information from laser diode to optical disk and back to photo diode. However, micro thermal deformation of pick-up base which is induced by thermal environment during operation can deteriorate the performance of optical pick-up. Therefore, it is important to measure and analyze the thermal deformation behavior of pick-up base under thermal environment. In the present study, a measurement system using holographic interferometry was designed to measure micro thermal deformation of pick up base. The measurement system was verified by using the deformation of cantilever with prescribed motion actuated by PZT with 1 nm resolution. Interferometric measurement was compared quantitatively with that induced by PZT actuator. Finally, micro thermal deformation of pick-up base under actual thermal environment was measured using the present holographic interferometry and the results were analysed.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.333-340
• /
• 1996

We have implemented a planar integrated optics for the fractional Fourier transform (FRT) which has recently been developed as a generalized form of the conventional Fourier transform. FRT optical systems provide versatile tools for analyzing signals and designing hardwares, but require high accuracy and stability in the arrangement of optical components because of their shift-variant characteristic. The planar optical FRT setup composed of free-space optical components integrated on a single glass block makes the FRT of 2-dimensional(2-D) input patterns through the 3-D glass-space. Therefore, taking advantage of the compactness, easy alignment and thermal/mechanical stability, the planar optics can provide a useful approach to realizing an optical fractional correlation system in a practical way. In the experiment, we have obtained accurate FRT results by using the planar integrated optics with 4 different fractional orders of 0.25, 0.5, 0.75, and 1.0.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.38-45
• /
• 2004

As optical communication is being substituted for telecommunication, the demand of a large variety of fiber optic components is increasing. V-groove substrates, one of the module components, are used to connect optical fibers to optical planar circuits and to arrange fibers. Their applications are multi-channel optical connectors and optical waveguide fiber coupling, etc. Because these substrates are a critical part of the splitter in a multiplexer and a multi fiber connector, precise and reliable fabrication process is required. For precisely aligning core pitch between fibers, machined core pitch tolerance should be within sub-microns. Therefore, these are generally produced by state-of-the-art micro-fabrication like MEMS. However, most of the process equipment is very expensive. It is also difficult to change the process line for custom designs to meet specific requirements using various materials. For various design specifications such as different values of the V angle and low-priced process, the fabrication method should be flexible and low cost. To achieve this goal, we have suggested a miniaturized machine tool with high accuracy positioning system. Through this study, it is shown that this cutting process can be applied to produce V-groove subtracts. We also show the possibility of using a miniaturized machining system for producing small parts.