• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.362-366
• /
• 2007

In this research, the optimal grinding condition has been obtained by design of experiment (DOE) fur the development of aspheric lens for the 3 Mega Pixel, 2.5x optical zoom camera-phone module. Also, the tungsten carbide (WC) mold was processed by the method of ultra precision grinding under this optimal grinding condition. The influence of diamond-liked carbon (DLC) coating on form accuracy (PV) and surface roughness (Ra) of the mold was evaluated through measurements after DCL coating using ion plating on the ground mold. Also, aspheric glass lenses were molded, some before DLC coating of the mold and some after the DLC coating. The optical characteristics of each sample, molded by the different molds, were compared with each other.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.206-213
• /
• 2015

An omni-directional, graded-index and textured ZnO nanorods with $MgF_2$ anti-reflective(AR) coating films for the electro optical tracking system(EOTS) by e-beam evaporation method are presented. we achieved that the graded index structure can minimize image tracking interference of EOTS which is comparable to a general AR coating films. Optimized ZnO nanorods with $MgF_2$ AR coating films lead to decreasing Fresnel reflection by gradient refractive index. According to our experiment results, ZnO nanorods with $MgF_2$ AR coating films can be used for various electro optical system to improve the optical performance.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.359-363
• /
• 2000

Reduced nicotinamide adenine dinucleotide (NADH) was encapsulated in transparent porous sol-gel silicate gels using by different organoalkoxysilane precursor. Characteristics optical absorption and fluorescence of NADH in the gels were examined with depending on NADH concentration and compared. Optical absorption in the aminopropyltrimethoxysilane (APTMS) gel is highest and remains constant during aging the gel. Thus, it is found that NADH in the APTMS gel is most stable and activated. On the other hand, methyltriethoxysilane (MTES) gel presents the lowest optical absorption diminishing with aging the gel. Measurable increase of fluorescence with raising the NADH concentration is observed except for the APTMS gel due to its solubility in the buffer during fluorescence measurement.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.38-46
• /
• 2005

Experimental work was carried out in order to produce a novel grade of ink-jet paper that has both high print-out quality and price competitiveness. Usually, silica and PVOH has been used for ink-jet paper to design the coating layer that has a hydrophilic and micro-porous structure. However, poor rheological characteristics and low productivity of the silica-PVOH system make the price of the ink-jet paper high. The main focus of this study was replacing the conventional silica (coating pigment) PVOH (binder) coating system with the new PCC (coating pigment) cationic starch (binder) coating system, and optimizing thecoating technology associated with PPC-cationic starch system. In this study, ink-jet print quality of PCC-coated papers was compared with that of silica-coated paper. Two types of PCC were used: conventional type and colloid type. It turned out that PCC C, a conventional coating pigment, has not given a desirable result: it showed high dot reproduction, but it gave low optical density. In spite of low dot reproduction, the qualities of PCC A were comparable or superior to those of silica in optical density, color reproduction, and the uniformity of printing surface. It was also shown that the problems that are happened when the dosage level of cationic starch was too low were varied with ink-type used in each printer. However, in the case of low binder level, the produced image was widely spread resulting fromtoo low optical density of images, or from the lack of bonding ability to set ink into coating surface.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.576-582
• /
• 2021

Dichroic beam-splitter (DBS) with polarization-maintaining took an important role in the free space quantum telecommunication tests on the Micius satellite of China. In this presentation, we designed and prepared a 50 layer polarization-maintaining DBS coating by a dual ion beam sputtering deposition (Dual-IBS) method. In order to solve a stress problem, an 18 layer special anti-reflection (AR) coating with similar physical thickness ratio was deposited on the backside. By stress compensation, the surface flatness RMS value of the DBS sample decreased from 0.341 λ (@632.8 nm) to 0.103 λ while beam splitting and polarization maintaining properties were almost kept unchanged. Further, we discussed the mechanism of film stress and stress compensation by equation deduction and found that total stress had a strong relationship with the total physical thickness and the ratio of layer materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.741-744
• /
• 2007

The research applied the processes of spin-coating and thermal-evaporating in proper order to deposit the hole transport material N,N'-Bis(naphthalen-1-yl)- N,N'-bis(phenyl)-benzidine (NPB) on the ITO substrate to make flexible organic light emitting diodes (FOLED) with double hole transport layer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.796-799
• /
• 1996

광섬유는 코어(Core), 클레드(Clad), 그리고 1,2차 코팅(Coating)으로 구성되어 있다. 본 연구에서는 광섬유의 코팅에 생기는 결함의 유무 및 종류와 크기를 분류하는 Vision System을 구현하였다. 전처리 과정으로, CCD Camera를 이용하여 얻은 화상에 대하여 Sobel 연산자로 경계선을 추출하고, 문턱값(Threshold Value)을 적용하여 이진 화상을 만든다. 외경 정보 추출을 위하여, 투영 정보, 수리 형태학(Mathematical Morphology)적 연산을 수행하고, 결함의 종류와 크기를 효율적으로 분류하도록 Tree Classifier를 설계하였다. 실험 결과로서 각 결함 별 오차율, 전체 오차율(Total Error Rate)등을 제시하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.32-33
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.224-225
• /
• 1999

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.31-38
• /
• 2013

The chemical composition of the black Cr solar selective coatings electrodeposited were investigated for property analysis by using a XPS(X-ray photoelectron spectroscopy) before and after annealing in air at $300^{\circ}C{\sim}500^{\circ}C$ for 120 hours. Black Cr selective coating exposed by solar radiation for 5 months was compared with annealed sample. In addition, The Cu solar selective coatings were prepared by thermal oxidation method for low temperature application. The samples obtained were characterized by using the optical reflectance measurements by using a spectrometer. Optical properties of oxidized Cu solar coatings were solar absorptance $({\alpha}){\simeq}0.62$ and thermal emittance $({\epsilon}){\simeq}0.41(100^{\circ}C)$. In the as-prepared Cr black selective coating, the surface of the coating was found to have Cr hydroxide and Cr. The Cr hydroxide of the major component was converted to $Cr_2O_3$ or $CrO_3$ form after annealing at $500^{\circ}C$ with the desorption of water molecules. The black Cr selective coating was degraded significantly at temperature of $500^{\circ}C$. The main optical degradation modes of this coating were diffusion of Cu substrate materials.