• 천문학회보
• /
• 제37권2호
• /
• pp.214.1-214.1
• /
• 2012

한국천문연구원은 우주물체 전자광학 감시체계 기술개발 사업을 통해 자국위성의 추적감시를 위해 0.5m 광시야 감시관측소 국제 네트워크(OWL : Optical Wide-Field patroL)를 구축할 예정이다. OWL 시스템의 설계 검증을 위해 시험모델을 개발하였고, 연구소 내에 테스트베드에 설치하여 종합적인 테스트를 수행하고 있다. OWL 시험모델은 해외 설치모델과 동일하게 제작하였으며 돔을 제외한 모든 서브시스템을 국산화하였다. 유효구경 0.5m의 Richey-Cretian 형식의 광학계로 1.75도의 광시야를 구현하였고 영상보정을 위해 5개의 보정 렌즈를 사용하였다. 인공위성 추적을 위해 초당 10도 이상 기동이 가능한 alt-az 방식의 마운트를 개발하였다. 단일 노출에서 다수의 인공위성 궤적을 얻기 위해 chopper 제어 시스템을 도입하였고, chopper, 필터휠, de-rotator, CCD 카메라 등 4개의 부분품을 하나로 묶어 간결한 back-end를 구성하였다. 시스템의 안정성 향상과 유지보수의 용이성을 위해 망원경 및 관측소 제어 전용보드를 개발하였고, 전자동 무인관측을 위한 스케줄러 및 운영소프트웨어를 개발하였다. 시험모델을 이용하여 수 개월간 테스트을 수행하고, 관측결과 분석을 통하여 문제점을 수정보완한 후 OWL 시스템의 최종 설계안을 확정할 예정이다.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.67-77
• /
• 1995

In modern industry the requirement of automation of manufacturing process increases so that unmanned system has been popular as an ultimate goal of modern manufacturing process. In unmanned manufacturing process the tool fracture is a very serious problem because it results in the damage of workpieces and can stop the operation of whole manufa- turing system. In this study, image processing technique is used to detect the fracture of insert tip of face milling using multi-point-tool. In order to acquire the image information of fracture shape of rotation insert tip. We set up the optical system using a light beam chopper. In this system we can reduce the image degradation generated from stopped image of rotating insert tip using image restoration technique. We calculated the mean square error to diagnose the condition of tool fracture, and determind the criteria of tool fracture using experimental and staticstical method. From the results of this study we've developed non- contact detection technique of tool fracture using image processing method and proposed the fracture direction of automation and unmanned system considering the optimal time of tool change milling.

• Journal of Astronomy and Space Sciences
• /
• 제33권3호
• /
• pp.221-227
• /
• 2016

As described in the previous paper (Park et al. 2013), the detector subsystem of optical wide-field patrol (OWL) provides many observational data points of a single artificial satellite or space debris in the form of small streaks, using a chopper system and a time tagger. The position and the corresponding time data are matched assuming that the length of a streak on the CCD frame is proportional to the time duration of the exposure during which the chopper blades do not obscure the CCD window. In the previous study, however, the length was measured using the diagonal of the rectangle of the image area containing the streak; the results were quite ambiguous and inaccurate, allowing possible matching error of positions and time data. Furthermore, because only one (position, time) data point is created from one streak, the efficiency of the observation decreases. To define the length of a streak correctly, it is important to locate the endpoints of a streak. In this paper, a method using a differential convolution mask pattern is tested. This method can be used to obtain the positions where the pixel values are changed sharply. These endpoints can be regarded as directly detected positional data, and the number of data points is doubled by this result.

• 비파괴검사학회지
• /
• 제14권4호
• /
• pp.237-243
• /
• 1995

고체 시료를 대상으로 하여 silicon wafer에는 $90^{\circ}$ wedge형 진동자를 사용하고 압전재료인 $LiTaO_3$에는 interdigital transducer(IDT)를 사용하였으며, knife edge를 이용한 광학적 검지(optical probing)법을 써서 표면탄성파의 발생 및 측정하는 기법으로써 재료에서의 표면탄성파의 감쇠를 검출하는 방법을 연구하였다. IDT1 및 IDT2로는 20.8 MHz와 14.5 MHz를, $90^{\circ}$ wedge형 진동자로부터는 20.0 MHz의 표면탄성파를 발생시켰으며 표면탄성파로 생기는 표면의 굴곡을 검출하는데 He-Ne laser beam을 이용하였다. Optical chopper로 변조시킨 laser beam을 같은 주파수로 변조시킨 표면탄성파에 입사시켜 산란되는 광을 같은 주파수로 동조된 lock-in amplifier로 검출하였다. 이와 같이 함으로써 검출할 표면탄성파와 검출에 사용된 laser beam 및 측정기기인 위상감지기(Phase Sensitive Detector : PSD)를 같은 주파수로 변조하여 동기시킬 수 있었으며 측정계를 단순화하였다. IDT1, IDT2에서 발생된 표면탄성과의 감쇠계수는 각각 $0.62{\sim}0.75dB/mm,\;0.60{\sim}0.72dB/mm$였으며 wedge형 진동자에서는 $0.83{\sim}1.28dB/mm$인 값을 얻었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.293-294
• /
• 2009

The spectral responsivity of solar cells has been measured under high background irradiance using an LED-based differential spectral responsivity Comparator (DSR-C). The comparator developed is fully automated and has some advantages: It does not need a chopper to modulate the light. Unlike the conventional method, it does not require a monochromator to select wavelength. It covers a wavelength range up to 1200 nm. The wavelength range of the comparator is limited by the spectral power distribution of the LEDs and the spectral responsivity of the standard detector. An active temperature control was utilized to meet the specified standard conditions of solar cell test. This work shows the effect of different levels of background irradiance on the spectral responsivity and the importance of same background irradiance for solar cell test as specified by the corresponding standard.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2579-2584
• /
• 2007

A digital micro holographic particle tracking velocimetry (HPTV) system consisting of a high-speed camera and a single laser with acoustic optical modulator (AOM) chopper was established. The digital micro HPTV system was applied to water flow in a micro curved-tube for measuring instantaneous 3-D velocity field data consecutively. The micro curved-tube is using to reproduce the dorsal aorta or utilize in various lap-on-a-chip. The temporal evolution of a three-dimensional water flow in the micro curved-tube (the curvature, ${\kappa}$=1/${\phi}$, 2/${\phi}$, 4/${\phi}$, 8/${\phi}$) of 100 ${\mu}m$ and 300 ${\mu}m$ inner diameters was obtained and mean velocity field distribution was obtained by statistical-averaging the instantaneous velocity fields.

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.56-62
• /
• 1990

Surface Acoustic Waves(SAW) are generated on silicon wafer and $YZ-LiTaO_3$ substrate and are detected by noncontact method. As wave sources two kinds of transducers are used : the wedge-type of 20.0 MHz and fabricated Interdigital Transducer(IDT) of 20.8 MHz. SAW are modulated by the optical chopper frequency and are syncronized with a laser beam. In signal processing, intensity variations of light due to the intensity of SAW are analyzed using lock- in amplifier. From the results, corresponding to the applied input power, the intensity variations of a deflected light by corrugations on the substrates are increased and saturation phenomenon is observed.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.111-118
• /
• 2003

Recently, environmental damage to urban area becomes serious problem due to the exhaust emissions by increasing the number of vehicle. Especially, exhaust emission from diesel vehicles are blown to be harmful to human health and environment. Photoacoustic Spectroscopy system is very useful technology for simultaneous and continuous measurement of the various components of the automotive exhaust gas. In this study, in order to reduce emission gases from automobile, we tried to develop the measurement system of Photoacoustic Spectroscopy. To improve performance of high sensitive Photoacoustic Spectroscopy system for automotive exhaust emissions, the shape of Photoacoustic Spectroscopy cell was optimized to use the flow analysis. And Exhaust emission data of the 1,500cc gasoline engine was fixed the working fluid. The characteristics of fluid flow for cell were analyzed by various conditions in detail.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.148-156
• /
• 1996

Automatic product system is gradually increasing according to development of industrial society. On-line measurement makes a important role in view of economic and effective side in industrial product system. Syncronization system is developed to measure screw thread which is rotating. In-process measuring of rotating body have a lot of difficuties even thoufht using various method containing high speed camera. So, now we suggest one of the new method which is not so expansive. In this study, digital value was produced through the image processing algorithm from acquired orignal image. As a result, we have a good agreement between measuring values calculated from image conture and measuring values acquired from profile project by means of experiment, respectively.

• 한국광학회지
• /
• 제3권4호
• /
• pp.222-226
• /
• 1992

$Ar^{+}$레이저로 펌핑되는 Nd:glass레이저를 제작하여 그 특성을 조사하였다. 레이저 공진기는 오목거울 두 개와 98% 고반사 평면경, 그리고 Brewster 각도로 놓인 Nd:glass 의 이득 매질로 구성되었으며, 효율적인 펌핑을 위해서 $Ar^{+}$레이저 광선을 공진기 길이 방향으로 입사하여 공진모우드의 beam waist에서 초점이 맺히도록 하였다. Nd:glass의 열존도도가 작아서 흡수된 펌핑빔에 의해 생성된 잔열로 인한 매질의 손상이 우려되기 때문에 mechanical chopper 로 펌핑빔을 100Hz로 끊어서 입사하여 잔열의 생성을 줄였다. 1.5W로 펌핑될 때 Nd:glass 레이저의 출력은 70mW이었고 발진이 되는 문턱에서의 펌핑파워는 520mW이었으며 slope efficiency는 7.4%이었다.