• 제목/요약/키워드: Optical and structural properties

검색결과 933건 처리시간 0.03초

Al doped ZnO 박막 특성에 미치는 증착 온도의 영향 (Effects of the substrate temperature on the properties of Al doped ZnO films)

  • 김용현;성태연;김원목
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.82-83
    • /
    • 2008
  • AI doped ZnO (AZO) films, and intentionally Zn added AZO (ZAZO) films were prepared on Corning glass by rf magnetron sputtering, and the electrical, optical, and structural properties of the as-deposited films together with the air annealed films were investigated. The resistivity of the AZO films increased with increasing substrate temperature and having minimum resistivity at $150^{\circ}C$. At the high temperature, the ZAZO films showed improved electrical properties better than the AZO films due.to increase in both the carrier concentration and.the Hall mobility. Upon air annealing at $500^{\circ}C$, the resistivity of both AZO and ZAZO films increased substantially, but the relative amount of degradation was smaller for films deposited at $450^{\circ}C$ than the films deposited at $150^{\circ}C$.

  • PDF

Effect of Growth Temperature on the Structural and Optical Properties of Gd-doped Zinc Oxide Thin Films

  • 조신호;김문환
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2012년도 춘계학술발표회 논문집
    • /
    • pp.247-247
    • /
    • 2012
  • Gd-doped ZnO thin films were prepared with different growth temperatures by using a radio-frequency magnetron sputtering method. The deposited samples were characterized by using the X-ray diffractometer, the scanning electron microscopy, and the photoluminescence spectroscopy. All of the films show an average transmittance of about 85% in the wavelength range from 400 to 1100 nm.

  • PDF

Graphite상의 ZnO Nanorod성장과 그를 이용한 Schottky Diode 제작

  • 남광희;백성호;박일규
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.421.2-421.2
    • /
    • 2014
  • We report on the growth of ZnO nanorods (NRs) grown on graphite and silicon substrates via an all-solution process and characteristics of their heterojunctions. Structural investigations indicated that morphological and crystalline properties were not significantly different for the ZnO NRs on both substrates. However, optical properties from photoluminescence spectra showed that the ZnO NRs on graphite substrate contained more point defects than that on Si substrate. The ZnO NRs on both substrates showed typical rectification properties exhibiting successful diode formation. The heterojunction between the ZnO NRs and the graphite substrate showed a Schottky diode characteristic and photoresponse under ultraviolet illumination at a small reverse bias of -0.1 V. The results showed that the graphite substrate could be a good candidate for a Schottky contact electrode as well as a conducting substrate for electronic and optoelectronic applications of ZnO NRs.

  • PDF

PES 기판상에 증착된 AZO 박막의 특성연구 (Properties of AZO thin film deposited on the PES substrate)

  • 김상모;임유승;최명규;김경환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.403-404
    • /
    • 2007
  • We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. ZnO doped the content of Al 2 wt% was used and the sputtering conditions were gas pressure 1mTorr and input power 100W. The electrical, structural and optical properties of AZO thin films were investigated. To investigate the as-deposited thin film properties, we employed four-point probe, UV/VIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM).

  • PDF

ZnO 초박막의 두께 변화에 따른 구조적, 전기적, 광학적 특성 변화 연구 (The Structural, Electrical, and Optical Properties of ZnO Ultra-thin Films Dependent on Film Thickness)

  • 강경문;;김민재;이홍섭;박형호
    • 마이크로전자및패키징학회지
    • /
    • 제26권2호
    • /
    • pp.15-21
    • /
    • 2019
  • 원자층 증착법(ALD: atomic layer deposition)으로 $150^{\circ}C$에서 성장된 zinc oxide (ZnO) 초박막의 두께 변화에 따른 구조적, 전기적, 광학적 특성을 조사하였다. ZnO 박막을 증착하기 위해 금속 전구체와 반응물로 각각 diethylzinc와 deionized water를 사용하였다. ALD 사이클 당 성장률은 $150^{\circ}C$에서 약 0.21 nm/cycle로 일정 하였으며, 50 사이클 이하의 샘플들은 초기 ALD 성장 단계에서 상대적으로 얇은 두께로 인하여 비정질 성질을 갖는 것으로 보였다. 100 사이클에서 200 사이클로 두께가 증가함에 따라 ZnO 박막의 결정성이 증가하였고 hexagonal wurtzite 구조를 보였다. 또한, ZnO 박막의 입자 크기가 ALD 사이클의 수의 증가에 따라 증가되었다. 전기적 특성 분석 결과 박막 두께의 증가에 따라서 비저항 값이 감소하였으며, 이는 박막 두께 증가에 따른 입자 크기 증가 및 결정성 개선으로 더 두꺼운 ZnO 박막에서 입자 경계의 농도 감소와 상관 관계가 있음을 알 수 있었다. 광학적 특성 분석 결과 근 자외선 영역 (300 nm~400 nm)에서의 밴드 엣지 흡수가 증가 및 이동되었는데 이 현상은 ZnO 박막 두께의 증가에 따른 캐리어 농도의 증가가 기인 한 것으로, 이 결과는 박막 두께의 증가에 따른 저항률 감소와 잘 일치한다. 결과적으로 박막의 두께가 증가하면 막 면의 응력이 완화되어 밴드 갭이 감소하고 결정성 및 전도성이 향상됨을 알 수 있었다.

RF 출력이 ZnO 박막의 전기·광학적 특성에 미치는 영향 (Effect of RF Powers on the Electro·optical Properties of ZnO Thin-Films)

  • 신동휘;변창섭;김선태
    • 한국재료학회지
    • /
    • 제22권10호
    • /
    • pp.508-512
    • /
    • 2012
  • ZnO thin films were grown on a sapphire substrate by RF magnetron sputtering. The characteristics of the thin films were investigated by ellipsometry, X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL), and Hall effect. The substrate temperature and growth time were kept constant at $200^{\circ}C$ at 30 minutes, respectively. The RF power was varied within the range of 200 to 500 W. ZnO thin films on sapphire substrate were grown with a preferred C-axis orientation along the (0002) plan; X-ray diffraction peak shifted to low angles and PL emission peak was red-shifted with increasing RF power. In addition, the electrical characteristics of the carrier density and mobility decreased and the resistivity increased. In the electrical and optical properties of ZnO thin films under variation of RF power, the crystallinity improved and the roughness increased with increasing RF power due to decreased oxygen vacancies and the presence of excess zinc above the optimal range of RF power. Consequently, the crystallinity of the ZnO thin films grown on sapphire substrate was improved with RF sputtering power; however, excess Zn resulted because of the structural, electrical, and optical properties of the ZnO thin films. Thus, excess RF power will act as a factor that degrades the device characteristics.

진공열처리 온도에 따른 GZO/Al 적층박막의 구조적, 전기적, 광학적 특성 변화 (Influence of Post-deposition Annealing Temperature on the Properties of GZO/Al Thin Film)

  • 김선경;김승홍;김소영;전재현;공태경;윤대영;최동용;최동혁;손동일;김대일
    • 한국표면공학회지
    • /
    • 제47권2호
    • /
    • pp.81-85
    • /
    • 2014
  • Ga doped ZnO (GZO)/Al bi-layered films were deposited on the glass substrate by RF and DC magnetron sputtering and then vacuum annealed at different temperatures of 100, 200 and $300^{\circ}C$ for 30 minutes to consider the effects of annealing temperature on the structural, electrical and optical properties of the films. For all depositions, the thicknesses of the GZO and Al films were kept constant at 95 and 5 nm, respectively, by controlling the deposition time. As-deposited GZO/Al bi-layered films showed a relatively low optical transmittance of 62%, while the films annealed at $300^{\circ}C$ showed a higher transmittance of 81%, compared to the other films. In addition, the electrical resistivity of the films was influenced by annealing temperature and the lowest resistivity of $9.8{\times}10^{-4}{\Omega}cm$ was observed in the films annealed at $300^{\circ}C$. Due to the increased carrier mobility, 2.35 $cm^2V^{-1}S^{-1}$ of the films. From the experimental results, it can be concluded that increasing the annealing temperature enhanced the optical and electrical properties of the GZO/Al films.