• 한국표면공학회지
• /
• 제32권2호
• /
• pp.125-133
• /
• 1999

Fluorine-doped $SnO_2$ thin films were deposited on soda-lime glass substrates by reactive DC magnetron sputtering method. Crystallinity as well as electrical and optical properties of $SnO_2$ : F thin film were investigated as the variations of deposition conditions such as substrate temperature, DC Power, $O_2$ gas pressure, $SF_6$ gas pressure. $SnO_2$ : F thin film deposited with 5% $SF_6$ gas pressure showed electrical resistivities of $2.5\times10^{-3}$cm with the average optical transparency (about 80%) These electrical and optical properties were found to be related to the crystallinity of $SnO_2$ : F thin films.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.562-567
• /
• 2022

Novel self-illuminated smart windows were fabricated consisting of Cu-doped ZnS (ZnS:Cu) powder and polymer-dispersed liquid crystal (PDLC). This smart window shows not only switchable transparency but also self-illumination without any attachable luminous body. Its electro-optical characteristics, transmittance, and luminance were investigated in relation to various applied voltages and composition ratios. The optical transmittance and luminous intensity increased with increasing applied voltages. However, the optical transmittance decreased with increasing ZnS:Cu powder content. One of the self-illuminated smart windows, which was fabricated with 9 wt% of ZnS:Cu, achieved the optical transmittance of 60.5% (at 550 nm) and the luminance of 11.0 cd/m² at 100 V. This smart window could be used as a normal switchable smart window in daytime and light-emitting signage at night.

• 센서학회지
• /
• 제22권1호
• /
• pp.49-53
• /
• 2013

In this paper, we proposed a laser-based non-contact temperature measuring method for high speed rotating polycarbonate (PC) disk using transparency change of thermocolor. The thermocolor has abilities to change color and transparency due to a change in temperature. The thermocolor is applied on one side of polyvinylidene fluoride (PVDF) membrane. The thermocolor applied membrane is attached to inside of reaction chamber in disk. An optical system consisted of a laser beam radiator and a laser photometer is installed. Laser is irradiated at the bottom side of disk and the transmitted laser beam is detected by the laser photometer at the opposite side of disk. During the disk is rotating, laser is irradiated and detected simultaneously. The laser photometer senses the transmitted laser power and generates voltage as output. The temperature of disk can be detected during the disk is rotating up to 3000 RPM.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.818-821
• /
• 2003

Sn-doped $In_{2}O_{3}$ (ITO) thin film is one of the materials widely on research not only in the academic fields but also in industrial fields because of their transparency, high conductivity and good adhesion characteristics on substrate. ITO thin films are usually preferred oriented to one of the (222), (400), and (440) planes during crystallization process, which is dependent on processing variables. The preferred orientation affects electrical, optical and etching properties of the films. In this study, thin films of preferred oriented in different orientation were fabricated by controlling processing variables. The crystallization behavior, grain size, surface roughness, transparency and electrical properties of the thin films in different orientation were examined.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.95-100
• /
• 2017

The transmittance of the three dimensional (3D) transparent display is an important factor and can be enhanced by adding a see-through area to the displayed 3D image in order to transmit an ambient light with maximum transparency. However, there is a side effect that the perceived 3D resolution can be degraded due to the see-through area. In this paper, we propose an advanced method to resolve the above trade-off relation between the transparency and the 3D resolution by using an active parallax barrier (PB) with a see-through area. The experimental results are also presented to prove the proposed principle.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.134-140
• /
• 2020

A significant enhancement of the magneto-optical Faraday rotation and extraordinary optical transmission (EOT) in the cascaded double-fishnet (CDF) structure with periodic rectangular apertures is theoretically predicted by using the extended finite difference time domain (FDTD) method. The results demonstrate that the transmittance spectrum of the CDF structure has two EOT resonant peaks in a broad spectrum spanning visible to near-infrared wavebands, one of them coinciding with the enhanced Faraday rotation and large figure of merit (FOM) at the same wavelength. It is most important that the resonant position and intensity of the transmittance, Faraday rotation and FOM can be simply tailored by adjusting the incident wavelength, the thickness of the magnetic layer, and the offset between two metallic rectangular apertures, etc. Furthermore, the intrinsic physical mechanism of the resonance characteristics of the transmittance and Faraday rotation is thoroughly studied by investigating the electromagnetic field distributions at the location of resonance. It is shown that the transmittance resonance is mainly determined by different hybrid modes of surface plasmons (SPs) and plasmonic electromagnetically induced transparency (EIT) behavior, and the enhancement of Faraday rotation is mostly governed by the plasmonic electromagnetically induced absorption (EIA) behavior and the conversion of the transverse magnetic (TM) mode and transverse electric (TE) mode in the magnetic dielectric layer.

• 한국통신학회논문지
• /
• 제27권10C호
• /
• pp.937-944
• /
• 2002

인터넷 트래픽의 급속한 증가로 인해 보다 큰 네크워크 용량이 요구되고 있다. 광 패킷 교환은 상이한 유형의 데이터를 지원하는 미래의 네트워크에서 필요한 특성들인 고속의 데이터 교환, 데이터 속도와 유형에 대한 투명성 등을 제공하여 준다. 본 논문에서는 IP 전송을 위해 광 패킷 코어 스위치와 광섬유링크로 구성된 광 백본 네트워크를 정의한다. 그리고 WDM 광 네트워크에서 광섬유 상에 존재하는 다수의 파장링크의 전 대역을 통합하여 단일매체의 대역으로 관리하는 멀티링크 광 패킷 스위치를 제안한다. 제안된 스위치는 WDM 버퍼를 사용할 뿐만 아니라 출력 링크의 광 패킷 메모리를 균등하게 사용하여, 필요한 메모리의 수를 줄임으로써 광 패킷 메모리를 경제적으로 실현할 수 있다. 컴퓨터 시뮬레이션에 의한 성능평가의 결과는 제안 스위치의 휴효성을 보여준다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.86-86
• /
• 2010

Micro- and nanoscale texturing and control of surface energy have been considered for superhydrophobicity on polymer and silicon. However these surfaces have been reported to be difficult to meet the robustness and transparency requirements for further applications, from self cleaning windows to biochip technology. Here we provided a novel method to fabricate a nearly superhydrophobic soda-lime glass using two-step method. The first step involved wet etching process to fabricate micro-sale patterns on soda-lime glass. The second step involved application of $SiO_x$-incorporated DLC to generate high intrinsic contact angle on the surface using chemical vapor deposition (CVD) process. To investigate the effect of surface roughness, we used both positive and negative micro-scale patterns on soda-limeglass, which is relatively hard for surface texturing in comparison to quartz or Pyrex glasses due to the presence of impurities, but cheaper. For all samples we tested the static wetting angle and transparency before and after 100 cycles of wear test using woolen steel. The surface morphology is observed using optical and scanning electron microscope (SEM). The results shows that negative patterns had a greater wear resistance while the hydrophobicity was best achieved using positive patterns having static contact angle up to 140 deg. with about 80% transparency. The overall experiment shows that positive patterns at etching time of 1 min shows the optimum transparency and hydrophobicity. The optimization of micro-scale pattern to achieve a robust, transparent, superhydrophobic soda-lime glass will be further investigated in the future works.

• 폴리머
• /
• 제34권6호
• /
• pp.495-500
• /
• 2010

4,4'-(Hexafluoroisopropylidene)diphthalic anhydride(6FDA)와 bis[4-(3-amino phenoxy)phenyl] sulfone(BAPS)의 조성에 cis-4-cyclohexene-1,2-dicarboxylic anhydride(CDBA)를 다양한 몰%로 사용하여 사슬 말단에 가교 반응이 된 폴리이미드(PI)를 얻었다. Grubbs 촉매 0.1 wt%를 사용하여 가교된 폴리아믹산(poly(amic acid), PAA)을 합성한 후에 PAA를 다양한 온도에서 열처리를 통해 가교된 PI 필름을 합성하였다. 제조된 필름의 열적-기계적 성질은 퓨리에 변환 적외선 분광기(FTIR), 시차주사 열량계(DSC), 열중량 분석기(TGA), 열기계 분석기(TMA), 만능인장 시험기(UTM) 등을 사용하여 측정하였고, 색차계(spectrophotometer)와 자외선-가시광선 흡광도기(UV-Vis. spectrometer)를 이용하여 광학적 특성을 확인하였다. CDBA의 몰%가 증가함에 따라 열적 기계적 성질은 증가하였지만 광학적 투명도는 이와는 반대로 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.116.1-116.1
• /
• 2011

Materials with a combination of high electrical conductivity and optical transparency are important components of many electronic and optoelectronic devices such as liquid crystal displays, solar cells, and light emitting diodes. In this study, to fabricate a low-resistance and high optical transparent electrode film for organic photovoltaic, the following steps were performed: the design and manufacture of an electroforming stamp mold, the fabrication of thermal roll imprinted (TRI) poly-carbonate (PC) patterned films, the manufacture of high-conductivity and low-resistance Ag paste which was filled into patterned PC film using a doctor blade process and then coated with a thin film layer of conductive polymer by a spin coating process. As a result of these imprinting processes the PC films obtained a line width of $10{\pm}0.5{\mu}m$, a channel length of $500{\pm}2{\mu}m$, and a pattern depth of $7.34{\pm}0.5{\mu}m$. After the Ag paste was used to fill part of the patterned film with conductive polymer coating, the following parameters were obtained: a sheet resistance of $9.65{\Omega}$/sq, optical transparency values were 83.69 % at a wavelength of 550 nm.