• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.829-841
• /
• 1990

On assuming that the transmission speed of the original information is the fifth-order transmission speed of the Korea digital multiplex hierarchy (564.992Mb/s), this paper proposes a new structure of the transmission line frame at the terminal repeater system, in order to not only maintain and conserve 565Mb/s optical fiber transmission system but also make the B.S.I. of digital communication network for the optical transmission. And the structure uses the mBIZ transmission line code, which is considered the optimal transmission line code of conventional transmission line codes. System hardware of the transmission line frame structure proposed in this paper is consisted by a method of pulse stuffing after converting the speed of the original information signal sequence at the terminal repeater system for 565Mb/s optical transmission. As a result of this, we can prevent the optical transmission system from a domino phenomenon, the phenomenon of the continuous error multiplication of systems by the transmission error, and suppress timing jitter and the identical consecutive digit number. And also we can improve SNR of the optical transmission system about 2dB because of raising total BER at the optical terminal system up to 10.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.567-571
• /
• 2012

To design the long-haul optical communication system, we need to decide the type of optical fiber and optical amplifier, span length of optical amplifier, dispersion compensation method, optical signal power, etc. Therefore, we need to predict the performance of optical communication system when we change one of the system parameters. In this paper, we investigate the method of predicting the maximum transmission length of the designed optical communication system and finding the optimum optical signal power to obtain the maximum transmission length.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2020

We research a system of compressed-sensing computational ghost imaging (CSCGI) based on the intensity fluctuation brought by turbulence. In this system, we used the gamma-gamma intensity-fluctuation model, which is commonly used in transmission systems, to simulate the CSCGI system. By setting proper values of the parameters such as transmission distance, refractive-index structure parameter, and sampling rates, the peak signal-to-noise ratio (PSNR) performance and bit-error rate (BER) performance are obtained to evaluate the imaging quality, which provides a theoretical model to further research the ghost-imaging algorithm.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.479-489
• /
• 1994

At the present time, it is an important problem that we are to select a transmission line code for the very-high speed optical transmission system which can confidentially transfer the original information signal sequence efficiently, as it is to be the large capacity and the economization for the optical digital transmission system to transfer the information signal sequence at the very-high speed. Therefore, this paper is to select first the proper transmission line codes for the high speed(more than Mb/s) optical transmission system of the proposed two-level unipolar transmission line codes up to date, and to decide a mBIZ (m Binary with One Zero insertion) code as an optimal transmission line code for the very-high speed optical transmission system, resulting from analyzing the performance at the requirements of the transmission line code, such as the maximum consecutive identical digits, the transmission delay time, the increasing rate of clock, the mark rate, the circuit complexity, the supervision of transmission line error, and power spectrum among the selected transmission line codes.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.559-565
• /
• 2009

The implementation possibility and increasement of transmission distance of 1 Tbps WDM transmission systems through the applying optical link configuration with inline dispersion management (DM) and optical phase conjugator (OPC) is investigated. When the considered optical link configuration is applied into $26{\times}40$ Gbps WDM transmission system and the optimal net residual dispersions (NRDs) depending on transmission length are decided, the effective transmission distanceis highly increased than that resulted in same system with fixed 0 ps/nm NRD in all transmission length. And, design rule of inline DM optical link is also shown through inducing the effective range of precompensation and postcompensation depending on transmission distance and launching power of WDM channel.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.12-13
• /
• 2002

The performance improvement of 40Gbit/s soliton transmission system employing nonlinear optical loop mirror (NOLM) as all-optical regenerative repeater is investigated. The switching characteristic of NOLM is optimized using our design strategies. By inserting the optical repeater where the eye-penalty of the transmitted signal becomes 1 ㏈, we achieve the improvement of 0.3㏈ eye-penalty resulting in further 480km transmission distance.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.69-78
• /
• 2006

In this paper, we presents the efficiency and a transmission quality of the system which is composed of the optical elements from physical layer of the active optical ring network. For a simulation it will use the Transmissionmaker WDM and it will be able to observation a optical transmission quality of the optical transmission system. The active optical network is composed of two rings(main ring and sub-ring). It measures the BER(Bit Error Rate) quality which it follows node number from the sub ring and physical distance of the node. Performance analysis from the physical layer becomes the standard of the plan for the efficiency optimization of the active optical ring network. Consequently it will be able to compose the efficient optical transmission system which reflects the physical distance, a traffic demand quantity of each node and a number of users from actual network.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.455-460
• /
• 2014

The system performance is analized for the optimal design of the transmission links with dispersion management and optical phase conjugation for compensating for the optical signal distortion due to the group velocity dispersion and optical nonlinear Kerr effects in the long-haul optical transmission system. That is, the effect of the relation of the residual dispersion in both half transmission sections with respect with optical phase conjugator (OPC) on the net residual dispersion (NRD) is assessed. It is conformed that the best compensation is obtained in NRD of 10 ps/nm, which is only controlled by the difference of the residual dispersion between each half transmission sections.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.953-954
• /
• 2006

Guaranteeing survivability is the most important issue in designing and operating optical transmission network. For dual system of optical transmission network, there should be two routes of the optical to prepare an error in one cable route. If a route is selected based on the standard of unused optical core when choosing an optical cable, dual optical cable routes could be installed in duplicated line. This paper simulates the installation of duplicated line when designing an optical transmission network, detects the status of duplicated line that could happen during transfer construction and switching and accomplishes a system that can confirm the location based on a map.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1784-1788
• /
• 2012

In this paper we considered condition for keep standard error probability in optical transmission system that applied on-off keying transmission which are modulated amplitude along the signal. we calculated received sensitivity of receiver in on-off keying transmission for optical detector have quantum efficiency belong 1 in optical transmission system. For BT is over 30, the number of photon is belong 10000 for maintain standard error probability. also we considered Also, we install a preamplifier to the receiver for considering the low output may be used with a light that was able to get results.