• 한국광학회지
• /
• 제28권6호
• /
• pp.361-365
• /
• 2017

본 논문은 협대역의 플라즈모닉 흡수체 구현을 위한 금속 나노입자 주기구조 설계 및 제작에 관한 연구다. 제안된 플라즈모닉 흡수체의 상단 금속 나노입자는 주기적으로 홈이 파여있는 템플릿을 이용하여 전자빔 증착 후, 열처리하는 제작 기술로 형성하였다. 주기적 홈 템플릿 위에 제작된 금속 나노입자를, 따로 제작한 33 nm 두께의 $Al_2O_3$가 스퍼터 가공된 200 nm 두께의 금속 반사판-기판 상단에 옮기는 방법을 통해 플라즈모닉 흡수체를 제작하였다. 제작된 금속 나노입자는 평균 지름 46 nm, 주기 76 nm의 크기를 가졌다. 광학 측정 결과, 제작된 플라즈모닉 흡수체는 중심파장 572 nm, 반값전폭 109.9 nm의 플라즈모닉 공명 흡수를 나타내었다.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.196-202
• /
• 2017

Corona discharge is always a sign of failure processes of high-voltage electrical apparatus, including those utilized in electric railway systems. Solar-blind ultraviolet (UV) cameras are effective tools for corona inspection. In this work, we present an automatic railway corona-discharge detection system based on solar-blind ultraviolet detection. The UV camera, mounted on top of a train, inspects the electrical apparatus, including transmission lines and insulators, along the railway during fast cruising of the train. An algorithm based on the Hough transform is proposed for distinguishing the emitting objects (corona discharge) from the noise. The detection system can report the suspected corona discharge in real time during fast cruises. An experiment was carried out during a routine inspection of railway apparatus in Xinjiang Province, China. Several corona-discharge points were found along the railway. The false-alarm rate was controlled to less than one time per hour during this inspection.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.147-152
• /
• 2006

Restoration of historical documents and arts has become important to inherit cultural properties. Most of historical documents were recorded on paper. Therefore, restoration of ancient papers is demanded and techniques for this purpose must be developed and sophisticated. In our study, several nondestructive methods for analyzing ancient paper have been developed. Image analysis using fast Fourier transform with suitable modifications was applied to optical micrographs of traditionally-handmade Korean and Japanese papers. This analysis determines the angle and anisotropy of fiber orientation of paper surfaces. Fiber orientation of traditionally-handmade Korean and Japanese papers was found to show their own characteristics in accordance with the motion of a papermaking screen made of bamboo splints. Consequently, the information on fiber orientation was found to be possible to distinguish the flow-sheet forming typical of Japanese paper and still-sheet forming typical of Korean paper. Moreover, the anisotropy was always higher for the screen side than for the top side, thus meaning that surface fiber orientation is possible to distinguish the two sides of paper of which papermaking history is unknown. An application of this technique to actual historical documents evidenced that wrapping papers were used as envelops with a lateral side up, namely, after rotating 90 degrees. A variety of cultural habits in writing letters was revealed by discrimination of the two sides.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.475-480
• /
• 2010

가스터빈 블레이드는 터빈 가동 시 발생하는 고온화염으로부터 블레이드를 보호하고, 구조물의 표면 온도를 안전한 수준으로 낮추기 위하여 블레이드 표면에 열차폐 코팅(TBC; Thermal barrier coating)을 하여 사용하고 있다. 본 논문에서는 가스터빈 1단 블레이드에 적용되는 코팅 방식을 이용하여 코인형 시험편을 제작하였고 열화 온도 및 유지 시간의 변화에 따른 코팅 계면 산화물의 성장 거동을 분석하였다. 코팅 단면에 대하여 코팅 계면 산화물의 두께와 마이크로 비커스 경도를 측정하여 열화 특성을 평가 하였다. 또한 성분분석을 통하여 미세조직의 변화를 관찰함으로써 열차폐 코팅의 열적 열화특성을 평가하였다.

• 한국멀티미디어학회논문지
• /
• 제3권4호
• /
• pp.380-388
• /
• 2000

변위량을 계산하여 영상 쌍의 대응점을 추출하는 방법중에서 대표적인 Hom & Schunck 수법이 있고, 이는 미분법을 기초하기 때문에 변위가 큰 변위량 추정을 위하여는 적당치 않다. 본 논문에서는 이러한 종래의 수법으로는 계측이 곤란하였던 이동량이 큰 변위의 변위량을 추정할 수 있는 직교 함수 전개법을 제안한다. 종래의 Horn & Schunck 수법에 의한 변위량은 국소적처리를 출발점으로 하는bottom-up수법으로 구하였으나, 직교 함수 전개법에서는 이와는 반대로 영상 전체의 움직임을 직교함수의 저차 모드부터 순차 전개하는 top-down수법을 이용한다. 직교 함수 전개법을 이용하여 변위량을 구하는 방법은 명도의 적분치 불변의 구속 조건에 관한 도함수를 이용하는 투영법에 의한 반복 계산으로 얻어진다. 마지막으로 구하여진 변위량과 제1원영상으로부터 제2의 영상을 합성하고, 합성된 영상과 제2의 원영상과 NRMS오차와 상관값을 비교하여 그 유효성을 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

• 보존과학회지
• /
• 제27권4호
• /
• pp.451-458
• /
• 2011

이 연구에서는 문헌조사와 광학적 및 과학적 분석조사를 토대로 송산리 6호분 벽화의 제작기법에 대해 고찰하였다. 연구결과, 송산리 6호분의 전축방식은 공적법이 아닌 모르타르를 이용하여 전(塼)을 축조하였고 줄눈(masonry joint) 재료로 석회, 모래 및 석고를 이용하였다. 전돌 표면에는 전체적으로 흑색을 칠한 다음 백색 회(灰)칠을 하였다. 그 위에 벽화제작을 위한 점토 바탕 층을 조성하였는데 수비가 잘된 점토를 흙손 등의 도구를 이용하지 않고 붓으로 바르듯이 완성하였다. 바탕층에 사용된 점토의 재료적 특성은 $30{\mu}m$ 실트질 크기 이하의 광물입자들로 구성되어 있다. 현재까지 고대의 고분벽화에서 사신도의 채색 부위에만 점토 바탕층을 조성하여 제작된 고분벽화는 송산리 6호분이 유일하다. 이 송산리 6호분은 동양을 비롯한 한국의 다른 벽화에서 볼 수 없는 제작기술이라 할 수 있으며 1933년 발굴 당시에 벽화는 이미 심각하게 훼손된 상태였다고 가정하더라도 종합적으로 볼 때 미완의 벽화라고 추정할 수 있다.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.134-140
• /
• 2015

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.