• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.857-860
• /
• 2002

The material that is both conductive in electricity and transparent to the visible-ray is called transparent conducting thin film. It has many field of application such as solar cell, liquid crystal display, transparent electrical heater, selective optical filter, and a optical electric device. In this study, indium tin oxide (ITO ; Sn-doped $In_2O_3$) thin films were deposited on $SiO_2$/soda-lime glass plates by a dc magnetron sputtering technique. The crystallinity and electrical properties of the films were investigated by X-ray diffraction(XRD), atomic force microscopy (AFM) scanning and 4-point probe. The optical transmittance of ITO films in the range of 300-1000nm were measured with a spectrophotometer. As a result, we obtained polycrystalline structured ITO films with (222), (400), and (440) peak. Transmittance of all the films were higher than 90% in the visible range.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.57-63
• /
• 1999

소의 수정체의 광투과, 흡수 Spectrum을 Spectrophotometer로 200-800nm 영역에서 측정하였다. 자외선 A-B선 모두 흡수되고 400nm 영역에서 광투과 edge가 나타나고, edge 영역보다 큰 파장에서는 완전투과형 filter가 되었다. 특히 $4^{\circ}C$-$60^{\circ}C$온도에서 광흡수 투과율의 온도조성은 없었다. 박막 설계로부터 long-pass edge filter형인 $n_0/(0.5H)L(LH)^6(0.5H)/n_s$와 $n_0{\mid}(0.5LH0.5L)^kL/1.25{\mid}4.0$ 박막 구조가 소의 수정체 광투과 Spectrum과 일치함을 알 수 있었다. 인공수정체, 안내렌즈의 설계시 박막구조 설계를 추가함으로써 자외선 차단 역할을 할 수 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.699-707
• /
• 1995

The material that is both conductive in electricity and transparent to the visible ray is called transparent conducting thin film. It has many fields of application such as Solar Cell, Liquid Crystal display, Vidicon on T.V, transparent electrical heater, selective optical filter, and a optical electric device , etc. In the recent papers on several TCO( transparent conducting oxide ) material, the study is mainly focusing on ITO(indium tin oxide) because ITO shows good results on both optical and electrical properties. Nowaday, in the development of LCD(Liquid Crystal display), the low temperature process to reduce the production cost and to deposit ITO on polymer substrate (or low melting substrate) has been demanded. In this study, we prepared indium tin oxide(ITO) by a cylindrical DC magnetron sputtering with Indium-tin (9:1) alloy target instead of indium-tin oxide target. The resistivity of the film deposited in oxygen partial pressure of 5% and substrate temperature of 140.deg. C. is 1.6*10$\^$-4/.ohm..cm with 85% optical transmission in viaible ray.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.120-123
• /
• 2002

In this study it had an excellent optical characteristic, it followed in the creation rate and the refractive index regulation to the ease. Chalcogenide produced the $As_{45}Se_{45}Te_{10}$ thin film and the $MgF_{2}$ thin film. It measured thin film plan simulation, and the thin film has a 1 -dimensional photonic band gap. The chalcogenide $As_{45}Se_{45}Te_{10}$ thin film was measured with the fact that it has a high refractive index (2.6~2.9). The $As_{45}Se_{45}Te_{10}$ and $MgF_{2}$ thin film, have a high refractive index and a low refractive index, it used a simulation and planed period 5-pairs structure, the result was from 500nm to 800nm. It will be able to confirm the characteristic which most of the incidence light reflects, the He-Ne (632.8nm) laser was irradiated in the thin film which stabilized the thin film. $As_{45}Se_{45}Te_{10}$ (high refractive index layer: H) and $MgF_{2}$ (low refractive index layer: L) results which plans the thin film with glass/LHLHLLHLHL/air structure, 632.8nm against transmitance, increased a lot. An application possibility with the filter against a specific wave length was confirmed.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.70-81
• /
• 1998

Fiber-Fabry-Perot (FFP) tunable filters, the essential component of WDM transmission, were designed, fabricated and characterized. Multi-layered thin film mirrors that consists of an optical collimater's corss section as a substrate and TiO$_{2}$SiO$_{2}$ alternating multi-layered films as a filter wer designed by means of the transfer matrix method. Fabricated mirrors showed the high reflectivity over around 98% as expected. After fabricating the tuneable filters using PZT, we measured FSR, FWHM, finesse , crosstalk and insertion loss, confirming that the built devices satisfied the optical filter's specifications required in the SEDM transmission systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1411-1413
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD (Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn wt 10%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature $150^{\circ}C$ and 8% $O_2$ partial pressure showed about $3.6{\Omega}/{\square}$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• Journal of the Optical Society of Korea
• /
• 제7권1호
• /
• pp.28-33
• /
• 2003

We describe the optimal design and the fabrication of a 2$\times$2 port optical device based on the thin film filter (TFF), and also propose a 4-channel OADM module using these devices. The optical performance of the proposed OADM module is evaluated theoretically and experimentally, and is compared to that of typical OADM modules using 1$\times$2 port optical devices for 4, 8, 16 and 32 drop channels in optical transmission systems. Since the 2$\times$2 port optical device accomplishes the function of wavelength multiplexing and demultiplexing simultaneously in the proposed OADM module, the insertion loss of through channels can be improved by 1.2 dB compare to that of typical OADM modules using 1$\times$2 port optical devices. In addition, both the size and the price of the module can be reduced to 40~50%.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.19-26
• /
• 2003

광통신용 광학부품의 신뢰성 특성은 솔더 조인트의 열 사이클에 따른 소성(Plastic)과 크립(Creep) 변형에 가장 큰 영향을 받는다. 열 사이클에 따른 소성과 크립 변형 증가로 인해 정렬 틀어짐이 발생하며 이는 광손실 변화의 주요인이 된다. 또한, 소성과 크립 변형량이 증가 또는 계속 누적이 될 경우 솔더의 피로수명 한계로 인해 제품 불량 발생의 원인이 된다. 이러한 열적 사이클에 따른 광부품의 신뢰성을 확보하기 위해 본 논문에서는 유한요소해석법(FEM)을 적용하였다. 소성과 크립 변형의 변화량을 유한요소해석으로 계산하고 이를 크립 피로 파괴(Creep-Fatigue) 수명 예측 모델에 적용하여 그 수명을 예측하였다. 솔더와 모재와의 계면 또는 솔더 내부에서 생성되는 온도에 따른 소성과 크립 변형을 파악하기 위해 텔코디아(Telcordia)의 광부품 신뢰성 온도 사이클(-40 to 75)을 적용하였다. 승온과 냉각 속도의 변화에 따른 영향을 검토하기 위해 1/min, 10/min 및 50/min으로 변화를 주고 유지 시간을 1시간으로 고정할 경우의 결과를 비교 분석하였다.

• 한국광학회지
• /
• 제14권3호
• /
• pp.331-337
• /
• 2003

본 연구는 이중 이온빔 스퍼터링 증착법으로 제작한 채널 간격 50 ㎓ 광통신용 협대역 투과 필터에 관한 연구이다. Ta$_2$ $O_{5}$ 단층박막의 특성 분석을 통해 공정 조건을 최적화 하였으며, DPS 필터 예비 증착을 통해 0.1 nm 이하의 박막두께 균일성을 확보하였다. 1/4 파장 광학박막 두께를 기본으로 하여 총 216층으로 구성되고 4개의 간격층을 갖는 채널 간격 50 ㎓ 협대역 투과 필터를 설계하였고, 파장 가변 레이저를 사용한 비접촉 광학 두께 제어 시스템을 사용하여 증착하였다. 박막 증착시 발생하는 스트레스를 줄이기 위하여 열팽창 계수가 큰 유리 기판을 사용하였으며, 비접촉 광학 두께 제어 시스템의 오차를 줄이기 위하여 협대역 투과 필터의 제작에 앞서 기판의 뒷면에 무반사 증착을 수행하였다. 이렇게 제작된 채널 간격이 50 ㎓인 협대역 투과 필터의 광학 특성은 삽입 손실이 0.40 ㏈, 잔물결이 0.20 ㏈이며,-0.5 ㏈와 -25 ㏈에서의 투과 대역폭이 각각 0.20 nm, 0.60 nm로 광통신에서 사용되는 사양을 만족하였다.하였다.