• 한국통신학회논문지
• /
• 제30권3A호
• /
• pp.203-208
• /
• 2005

To solve the cost problem of micro/picocell system, the fiber-optic cellular system was proposed. In this system, all channel elements are managed in Central Station, not in each base station. Also, all channel elements in a system can be dynamically assigned when the Spectrum Delivery Switch (SDS) is used. In this paper, we propose and analyze a new intergroup handoff scheme in the fiber-optic cellular system. The proposed scheme supports handoff with keeping current channel. Performance is evaluated with respect to the blocking probability and the handoff refused probability in both systems with SDS and without SDS. The numerical results show that the proposed scheme provides better performance than conventional soft handoff scheme.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1184-1201
• /
• 1995

Two multiple access protocols are proposed for a multichannel WDM optical fibre local area network or metropolitan area network in which users are interconnected using a passive star topology. Each user has a single tunable transmitter and a single tunable receiver. A transmitter sends a control packet before its data packet transmission so that its intended receivers can tune to the proper data channel wavelength. The maximum throughput of the proposed protocols are independent of the effective normalized propagation delay which may include the transmitter and receiver tuning times and the processing delays. The maximum throughputs of the protocols are analyzed and compared with those of the existing ones by numerical examples. The message delay of the R- Aloha/synchronous N-server switch protocol which is suitable for the queued users is also analyzed.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.136-137
• /
• 2000

광스위치는 광통신 및 광교환 시스템에서 광 경로 제어를 위한 소자로써 누화 특성이 좋고, 스위칭 시 소모 전력이 작아야 한다. 프로텍션 스위칭(circuit protection switching)시에는 아무런 전력 소모 없이 초기 경로를 가진 스위치가 바람직하다. 기존의 전력 소모 없이 초기 경로를 가지는 스위치는 실리카 물질과 비대칭적 X-분기 광도파로를 사용하여 구현되었다$^{(1)}$ . 그러나 실리카 스위치는 열광학 계수가 작기 때문에 스위칭 할 때 전력 소모가 큰 단점이 있다. 최근에 열광학 스위치는 폴리머를 재료로 하여 많이 제작되었다$^{(2).(3)}$ . 폴리머의 열광학 계수는 실리카에 비해 10배 정도 더 크다. 대부분의 폴리머 열광학 스위치는 대칭적 Y-분기 광도파로를 사용하여 제작되었기 때문에 모든 스위칭 상태에서 전력 소모가 필요하다. 본 논문에서는 4개의 비대칭적 Y-분기 광도파로가 직렬(cascade)로 연결된 구조를 갖는2$\times$2 열광학 스위치를 제안한다. 이 스위치는 전력 소모 없이 초기 경로를 가지며, 누화 특성을 향상시킨 구조이다. (중략)

• 정보통신설비학회논문지
• /
• 제8권4호
• /
• pp.195-200
• /
• 2009

In this paper, we propose a new priority Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose a Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. The simulation results shows that the proposed scheme has more advantages over the legacy schemes in terms of the burst blocking probability and the link utilization.

• 정보통신설비학회논문지
• /
• 제9권1호
• /
• pp.7-12
• /
• 2010

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop counts. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.46-49
• /
• 1986

A 32x32 liquid crystal (LC) flat panel display using two-dimensional array of PMOS switches and capacitors is designed and fabricated. Standard PMOS process was followed to fabricate the switch and capacitor array on silicon wafer, on the top of which guest-host effect liquid crystal was wmployed as an electro-optical material for optical switching and liquid crystal display(LCD) with its external drive circuitry was basically successful. Remaining problems to be solved are improvement of contrast ratio, good surface alignment and uniformity.

• 한국광학회지
• /
• 제14권4호
• /
• pp.466-472
• /
• 2003

본 논문에서는 서로 다른 길이의 광섬유 지연선로를 광 2${\times}$2 MEMS 스위치로 선택하여 위상 배열 안테나의 각 안테나 소자에 급전되는 RF 신호의 위상을 고속으로 제어할 수 있는 광 실시간 지연선로의 구조를 제안하였다. RF 신호의 주사 방향이 8개인 10 GHz 선형 위상 배열 안테나용 광 실시간 지연선로를 구현하였으며, 실험 결과 최대 시간 지연 오차가 0.2 ps이하, 즉 최대 주사 각 오차 0.84$^{\circ}$로 측정되었다. 또한 제안된 실시간 지연선로에 의해 구동되는 8개의 마이크로 스트립 패치 안테나 소자로 구성된 10 GHz용 선형 위상배열 안테나를 설계하였고, 시뮬레이션을 이용하여 이 안테나의 방사 패턴을 분석하였다.

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.357-364
• /
• 2014

본 논문은 반사필터를 사용하여 FTTH-PON의 원격제어 시스템을 다루고 있다. 기존의 FTTH-PON방식은 광케이블 고장과 수동분기소자(Splitter)의 품질 저하가 발생하는 것을 실시간 인지 할 수 없다. 본 연구에서는 이를 해결하기 위해서 광섬유 브래그 격자 원리를 이용한 반사필터를 개발하여 간선망과 Splitter를 감시 할 수 있게 하였다. 반사필터는 광케이블 밴딩, 커넥터 상태와 스플리터의 품질이 점진적으로 저하되는 것을 모니터링 하고 광케이블 고장, 수동 광분배기(Splitter) 등의 고장 위치를 확인하여 OLT측에 경보를 보내서 중앙관제에서 감시할 수 있는 시스템이다. 즉, 기존 통신 국사 측 파장분기 결합부(Coupler)를 이용해 1개의 광심선으로 live 파장과 감시용 파장을 2개로 보내어 가입자 측 장치인 모뎀과 집선 스위치에 반사필터를 사용하여 원격으로 광선로를 감시하는 시스템에 관한 연구이다. 이러한 반사필터의 개발로 인해 광선로 평균 고장처리 시간 단축과 효율적 유지보수를 할 수 있을 것으로 기대한다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.526-526
• /
• 1996

The single crystal of LiTaO3 is well known eletro-optic material as well as the piezoelectric one applied to SAW filter. LiTaO3 has large electro-optic effects, so applied to optical switch, acosto-optic deflector, and optical memory device using photorefractive effects. The crystal growth of SAW-grade LiTaO3 has been studied many aspects, but there is no detail research about optic-grade crystal growth. The conditions of optic-grade LiTaO3 single crystal are as below. The optical transmittance must be over 75%, and axial and radial concentratiom uniformity below 1%. The variation of Curie temperature depending on Li/Ta ratio must be also below 2$^{\circ}C$ and no internal no internal cracks and defects. Because of the limitation of crystal quality, the growing of optic-grade LiTaO3 single crystal is very difficult compared with the growing of SAW-grade. In this research, upper conditions of optic-grade single crystal was investigated after growing of 1 inch diameter and 1.5 inch length LiTaO3 single crystal having no internal cracks and defects using Czochralski method. Curie temperature was determined with DSC and measuring capacitance and lattice parameter was calculated about the grown crystal and ceramic powder samples of various Li/Ta ratio. The result of Tc variation was below 1.2$^{\circ}C$ all over the grown crystal, so it is confirmed that LiTaO3 was grown under congruent melting composition having optical homogeniety. Also, the optical transmittance was about 78%, which was sufficient for optical device.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권12호
• /
• pp.511-517
• /
• 2006

The key issues in high power, high energy applications such as electromagnetic launchers include safety, reliability, flexibility, efficiency, compactness, and cost. To explore some of the issues, a control scheme for a large current wave-forming was designed, built and experimentally verified using a 2.4MJ pulse power system (PPS). The PPS was made up of eight capacitors bank unit, each containing six capacitors connected in parallel. Therefore there were 48 capacitors in total, with ratings of 22kV and 50kJ each. Each unit is charged through a charging switch that is operated by air pressure. For discharging each unit has a triggered vacuum switch (TVS) with ratings of 200kA and 250kV. Hence, flexibility of a large current wave-forming can be obtained by controlling the charging voltage and the discharging times. The whole control system includes a personal computer(PC), RS232 and RS485 pseudo converter, electric/optical signal converters and eight 80C196KC micro-controller based capacitor-bank module(CBM) controllers. Hence, the PC based controller can set the capacitor charging voltages and the TVS trigger timings of each CBM controller for the current wave-forming. It also monitors and records the system status data. We illustrated that our control scheme was able to generate the large current pulse flexibly and safely by experiments. The our control scheme minimize the use of optical cables without reducing EMI noise immunity and reliability, this is resulting in cost reduction. Also, the reliability was increased by isolating ground doubly, it reduced drastically the interference of the large voltage pulse induced by the large current pulse. This paper contains the complete control scheme and details of each subsystem unit.