• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1542-1547
• /
• 2007

Laser surface treatment technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for mold parts. The optical lens with the elliptical profile is designed to obtain a wide surface hardening area with a uniform hardness. The objective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser surface treatment for the case of SKD61 steel and SCM4 steel. From the results of the experiments, it has been shown that the maximum average hardness is approximatly 700${\sim}$780 Hv when the power, focal position and the travel of laser are 1,095 W, 0mm and 0.3 m/min, respectively. In samples treated with lower scanning speeds, some small carbide particles appear in the interdendritic regions. This region contains fine martensite and carbide in proportions which depend on the local thermal cycle.

• 전기화학회지
• /
• 제13권1호
• /
• pp.57-62
• /
• 2010

New monomers, possessing various alkyl substituents on propylene dioxypyrrole, were synthesized. The monomers could be easily polymerized to produce highly conductive and soluble polymers. The corresponding polymers showed excellent solubility, retaining electrochemical and optical properties of their parent polymer [poly(propylene dioxypyrrole)]. The conductivities of chemically prepared polymers were quite high in a range of 20 and $60\;Scm^{-1}$. Solubility of the polymer in a common organic solvent was as high as no polymer is deposited on an electrode. The redox potentials of the electrochemically prepared polymers revealed quite stable electro-activity during repeated redox switching up to 500 times. The optoelectrochemistry studies also showed distinct color changes of the polymers upon changing the doping state, indicating strong absorption peaks at 400~600 nm in reduced states and complete bleaching in fully oxidized states.

• 전자통신동향분석
• /
• 제19권6호통권90호
• /
• pp.43-54
• /
• 2004

WDM-PON은 가입자망의 트래픽 병목 현상을 해결하고, 다양한 서비스 품질을 제공하면서 고속화된 데이터 전송을 위해 가입자 당 독립 파장을 할당함으로써 가입자의 요구 대역에 제한을 받지 않으며, 보안성이 보장되는 차세대 WDM 기반 수동형 광가입자망이다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하는 척도가 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망 동작 방식, 광다중화기 및 역다중화기, 그리고 WDM -PON과 WDM 다중화 기술인WDM/TDM, WDM/SCM, WDM/CDM을 포함한 다양한 광 수동 가입자망 구성 기술을 소개한다.

• 전자통신동향분석
• /
• 제21권6호통권102호
• /
• pp.113-123
• /
• 2006

WDM-PON은 가입자 별로 파장을 독립적으로 할당하여 전송로를 구성하는 방식으로 전송 프로토콜에 관계없이 전송이 가능하고, 전용선 수준의 대역폭 제공, 전송속도의 제한이 없으며, 서비스 품질을 보장하고, 보안성이 뛰어난 차세대 FTTH 기술로 평가받고 있다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기 개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하게 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망용 광원, 이러한 광원과 다중화 기술에 따른 WDM-PON, WDM/TDM,WDM/SCM 등 다양한 수동형 광가입자망 구성 기술을 소개한다.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.165-171
• /
• 2013

Nanostructured pure a-C and nitrogen doped a-C: N thin films with small particle size of, ~50 nm were obtained by Aerosol-assisted CVD method from the natural precursor camphor oil. Five samples were prepared for the a-C and a-C: N respectively, with the deposition temperatures ranging from $400^{\circ}C$ to $600^{\circ}C$. At high temperature, the AFM clarifies an even smoother image, due to the increase of the energetic carbon ion bombardment at the surface of the thin film. An ohmic contact was acquired from the current-voltage solar simulator characterization. The higher conductivity of a-C: N, of ${\sim}{\times}10^{-2}Scm^{-1}$ is due to the decrease in defects since the spin density gap decrease with the nitrogen addition. Pure a-C exhibit absorption coefficient, ${\alpha}$ of $10^4cm^{-1}$, whereas for a-C:N, ${\alpha}$ is of $10^5cm^{-1}$. The high ${\sigma}$ value of a-C:N is due to the presence of more graphitic component ($sp^2$ carbon bonding) in the carbon films.

• 정보보호학회논문지
• /
• 제14권6호
• /
• pp.57-68
• /
• 2004

근래에, Radio Frequency Identification (RFID) 시스템은 생산, 공급망관리, 재고관리 등의 분야에서 유용하게 사용될 반한 기술로서 산업계에서 많은 관심을 받고 있다. 가까운 미래에는 저렴한 가격의 RFID 태그나 스마트 라벨이 현재 사용되고 있는 바코트 대신 상품관리에 활용될 것으로 알려져 있다. 그러나 작고 값싼 RFID태그의 생산과, 사용자 프라이버시 보호를 위한 안전한 인증프로토콜의 개발은 아직 해결해야 할 문제들이다. 반도체 기술의 발전에도 불구하고, 태그의 계산과 저장능력은 제한되어 있으므로 기존 다른 시스템에 적용되던 암호시스템의 적용은 현실적으로 쉽지 않다. 그러므로 RFID시스템에서 사용할 수 있도록 더 작은 저장 공간과 더 작은 계산량이 소요되는 새로운 프로토콜의 개발이 필요하다. 본 논문에서는 위치트래킹 공격과 스푸핑 공격에 안전한 RFID인증 프로토콜을 제안한다. 제안한 프로토콜은 기존 인증프로토콜보다 데이터베이스에서의 계산랑이 상당히 감소하였으므로 프라이버시 보호를 위한 실질적인 해결책으로 사용이 가능하다.