• 대한화장품학회지
• /
• 제43권3호
• /
• pp.247-254
• /
• 2017

Optical Coherence Tomography (OCT)는 광 산란과 간섭 현상을 이용하여 비침습적으로 생체조직의 표면 및 내부 구조를 이미지화 할 수 있는 영상기술이다. OCT 기술은 질병의 조기진단과 같은 의료 분야에서 활발히 활용되어 왔으나 미용을 위한 피부진단으로의 적용은 아직 초기단계라 할 수 있다. 본 연구에서는 OCT를 피부효능평가에 도입하여 피부결 및 주름 평가에 활용 가능성을 살펴보았다. 모사판(replica)을 대상으로 한 평가에서 PRIMOS와 유사한 패턴을 보여 주었고 주름을 모사한 3차원 모델을 이용한 평가에서는 PRIMOS에 비해 측정각에 따른 오차가 적음을 확인할 수 있었다. 그리고 커버력 화장품을 이용한 사용 전후의 평가에 있어서도 이를 구분할 정도의 해상도를 보였다. 이러한 평가를 통해 OCT의 미세주름평가에서의 가능성을 알 수 있었고 향후 더 구체화된 연구를 통해 그 활용가능성에 대한 신뢰도를 높일 예정이다.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.79-84
• /
• 2022

As various flexible display products are released, the demand for high-performance colorless and transparent polyimide (CPI) film is continuously increasing. The primary purpose of this study is to establish a systematic procedure for optimizing the optical performance of CPI films by applying the response surface method. After selecting three key factors (monomer type, stirring time for varnish synthesis, and maximum temperature of vacuum furnace for film production) affecting optical performance based on experiences and references, CPI films were manufactured according to the experimental sequence designed by the central composite design, and then the yellowness index (YI) and optical transmittance (Tr) of the films were measured. When producing a CPI film by pouring varnish into a petri dish, the change in optical properties according to thickness should be considered, and there was a meaningful linear relationship between YI and Tr. The species of monomer and the maximum temperature were the critical factors that had an influence on YI and Tr, respectively. It is expected that the procedure proposed in this study can serve as a starting point for CPI film optimization studies considering the other factors that were not considered and responses such as thermal properties.

• Asian Journal of Atmospheric Environment
• /
• 제6권4호
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.53-54
• /
• 2009

The influence of atmospheric aerosol on satellite ocean color data were evaluated using SeaWiFS monthly standard mapped image products. The atmospheric optical thickness (AOT) was increased in spring and summer, and it showed the strong positive correlation with remote sensing reflectance, normalized waterleaving radiance /solar irradiance, at 555 nm (Rrs555) which is a component of the satellite chlorophyll estimation. Such the high AOT and high Rrs555 pixels showed overestimation of satellite chlorophyll in spring, especially in the area which showed large phytoplankton absorption which 1s expressed by low remote sensing reflectance at 443, 490 and 510 nm (Rrs 443, Rrs490 and Rrs510).

• 한국인쇄학회지
• /
• 제13권2호
• /
• pp.19-32
• /
• 1995

Liquid crystal-polymer composite(LCPC) films are promising new materials for both projection displays and vision products. LCPC films consist of a continuous liquid crystal phase embedded in a three- dimensional network of polymer matrix. The liquid crystal in these LC phases can be electrically switched giving rise to an opaque scattering off-state and a transparent, non- scattering on-state. In this work, a premixture is composed of LC, UV-curable monomer and photonitiator. LCPC films are formed by photopolymerization induced phase separation from this premixture. In conclusion, structure and electro-optical properties of LCPC films strongly depends on the selection of monomer, LC content and curing rate.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.398-402
• /
• 2011

In this paper, we have proposed a principle to design wideband, low dispersion and temperature stabilized slow light structure in slotted photonic crystal waveguide (SPCW). The infiltration of the silicon photonic crystal with polymer will enhance the slow light and increase the group index, whereas the different signs of thermo-optic coefficients of polymer and silicon make the proposed structure stable on temperature variation over $60^{\circ}C$ and improves the group index-bandwidth products of the designed structure. The SPCW structure is modified to maximize the slow light effect and minimize the dependence of the group index and hence the group velocity dispersion to temperature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.784-787
• /
• 2003

The present work covers three-dimensional flow simulation and deformation analysis of injection molded plastic lenses using solid elements. A numerical scheme to evaluate part deformation has been proposed from the results of injection molding analysis. Proposed scheme has been applied to the injection molding processes of optical plastic lenses: a spherical lens and an aspheric lens for a photo pick-up device. Through the simulation processes. residual stress is estimated and the final deformed patters are obtained for both products. The reliability of the proposed approach has also been verified in comparison with the results of real experiments.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.828-834
• /
• 2005

Recently, injection molded plastic optical products are widely used in many fields, because injection molding process has advantages of low cost and high productivity. However, there remains residual birefringence and residual stresses originated from flow history and differential cooling. The present study focused on developing a technique to measure the birefringence in optical plastic parts using R-G-B separation of white light. The main idea of an analysis comes from the fact that more information can be obtained from the distribution of retardation caused by different wavelengths. A complete system to give the quantitative values of retardation covering high order 2-D birefringence will be demonstrated. Further investigation is under way to improve the accuracy of the system using diodes as light sources.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.290-293
• /
• 2004

Recently, injection molded plastic optical products are widely used, because injection molding process has advantages of low cost and high productivity. However, there remains residual birefringence and residual stresses originated from flow history and differential cooling. The present study focused on developing a technique measuring birefringence in optical plastic parts using R-G-B separation of white light. The main idea of an analysis comes from the fact that more information can be obtained from the distribution of retardation caused by different wavelengths. A complete system to give the quantitative values of retardation covering high order 2-D birefringence will be demonstrated. Further investigation is under way to improve the accuracy of the system using diodes as light sources.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1761-1766
• /
• 2004

Recently, Plastic optical products are widely used. Injection molding process has advantages of low cost and high productivity. However, it remains a residual birefringence and residual stress by difference cooling. The present study focused on measuring birefringence in optical plastic parts using interference color pattern. The main idea of an analysis comes from chromatic aberration which is caused by difference light wavelengths. As a result, a complete system measuring the high order 2-D birefringence pattern was built. Further investigation is under way to improve the accuracy of birefringence measurement system by diode laser.