• 감성과학
• /
• 제17권1호
• /
• pp.29-38
• /
• 2014

In recent days, according as ergonomics and aesthetic engineering are important factors in the product market, there is a demand to develop automobile seat and interior designs which are focused on sensitive elements such as aesthetic and comfort features in order to satisfy the sensitive needs of consumers. To meet such demands, car seats are turning into functional and sensitive products that reflect elements of function and entertainment. According to such trends, this research is aimed to develop the illuminating car seat fabric that serve such functions as recognizing and reacting to car environments, which includes sensing over-speed, open doors, and unfastened safety belts through the illuminating car seat fabrics by optical fiber. For this purpose, basic physical properties of optical fiber are analyzed, appropriate weaving and etching technologies are applied, and the woven fabric of optical fiber for car seats are illuminating depend upon car environments. Moreover, the applicable woven fabric of optical fiber is deduced after evaluating the physical properties (such as tensile strength, heatproof, anti-fouling, washable and combustible traits) for the appropriateness of applying the woven fabric of optical fiber to car seats. For this purpose, the woven fabric of optical fiber is covered according to car seat processes; the optical fiber applied to seats is composed that it may be connected to one end of the connector linked to a LED so that it may perform functions like sensing over-speed, open doors, and unfastened safety belts; the sensed signals are transmitted to the control part, and luminescent signals are transmitted to LED.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.201-206
• /
• 2004

Laser scanner are getting used for inspection and reverse engineering in industry such as motors, electronic products, dies and molds. However, due to the lack of efficient scanning technique, the tasks become limited to the low accuracy purpose. The main reasons for this limitation for usefulness are caused from the optical drawback, such as irregular reflection, scanning direction normal to measuring surface, the influence of surface integrity, and other optical disturbances. To overcome these drawback of laser scanner, this study propose the mechanism to reduce the optical trouble by using the 2 kinds of rotational movement axis and by composing the spherical coordinate to scanning the surface keeping normal direction consistently. So, it could be designed and interfaced the measuring device to realize that mechanism, and then it could acquisite the accurate 3D form cloud data. Also, these data are compared with the standard master ball and the data acquisited from the touch point sensor, to evaluate the accuracy and stability of measurement and to demonstrate the implementation of an dental tooth purpose system

• Current Optics and Photonics
• /
• 제4권5호
• /
• pp.411-420
• /
• 2020

Non-contact three-dimensional (3D) measuring technology is used to identify defects in miniature products, such as optics, polymers, and semiconductors. Hence, this technology has garnered significant attention in computer vision research. In this paper, we focus on shape from focus (SFF), which is an optical passive method for 3D shape recovery. In existing SFF techniques using interpolation, all datasets of the focus volume are approximated using one model. However, these methods cannot demonstrate how a predefined model fits all image points of an object. Moreover, it is not reasonable to explain various shapes of datasets using one model. Furthermore, if noise is present in the dataset, an error will be generated. Therefore, we propose an algorithm based on polynomial regression analysis to address these disadvantages. Our experimental results indicate that the proposed method is more accurate than existing methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1566-1567
• /
• 2007

As the brightness of LED is getting higher, the lighting products using LED are actively being developed. On this study, we researched the characteristics and changes caused by the optical arrangement of LED light source, which applies to illumination by using the optical design programme. The changes were estimated by simulating regarding the arrangement of each form and measurement distance. As a result of the experiment. Intensity increased by 1 and Illuminance increased by around 10, as It changed a triangle into a pentagon. To realize white light, RGBG LED formation was the most efficient in case of square arrangement.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.1-8
• /
• 2012

This study was carried out to explore optimum use of the products generated from the National Forest Management Operation (NFMO) as raw materials for kraft pulp. First of all, different wood species from NFMO were randomly mixed, and then they were used to make kraft pulp under the specified condition. All kraft pulps made from the mixed species displayed equal physical properties to those from foreign wood chips used in Moorim P&P Co. Ltd. For optical properties, most of the unbleached pulps had high brightness but the pulp made from wood species containing chestnut tree showed the lowest brightness due to its high kappa number. Finally, the products from NFMO had little negative effects on the properties of kraft pulps. This means that they could be used as complementary raw materials for kraft pulps with foreign wood chips.

• 한국환경보건학회지
• /
• 제20권3호
• /
• pp.85-95
• /
• 1994

This study was performed to find out the detoxication effects of natural products Thuja orientalis, leaf of acorn, aloe ferox mill, pine cone, pine root, lonicerae flos on nickel toxicity. The experimental rats were divided into 3 groups such as nickel alone treatment group, natural products treatment groups before and after nickel treatments. Each group was administered with difference dose of nickel such as 6.6 mg/kg/day, 13.2 mg/kg/day, 19.8 mg/kg/day respectively, for 14 days. Natural products were administered by 400 mg per kilogram body weight rat per day. The weight change of rats, nickel concentration in organs, survival rate of rats, morphology of organs were observed in the experimental groups. The results obtained by the experiment were as follows: 1. The rats in the group treated with natural products had no effect on the weight gain. 2. The mean survival rate of rats in the nickel alone treatment group was 72.5% (6.6 mg/kg/day), 68.9% (13.2 mg/kg/day), 60.2% (19.8 mg/kg/day) respectively. 3. As for the amount of nickel accumulation in organs, it was the lowest amount treated with pine cone, pine root in that order. 4. When kidney and liver tissues were observed with as optical microscope, obvious change were visible in those tissues treated groups with Lonicerae and Aloe.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.239-242
• /
• 2002

With existing illumination rendering system being used in domestic, internationally developed common programs are taking over the market more than 90%. However, since the programs are established with DB designed to be most suitable for their own products, accuracy in analysis and visualized image are hardly reliable. This raises the necessities of establishing DB for domestic developed products. A method of establishing artificial luminair DB, which was studied on DB establishment in consideration of optical characteristics of domestic products with using RADIANCE program was presented in this study, and it is considered as the program of simulating light movement most accurately among all rendering programs developed so far.

• 한국주조공학회지
• /
• 제19권6호
• /
• pp.466-471
• /
• 1999

To investigate inclusions(oxides) which cause some trouble in the quality of the metal and a steel-making process, samples were manufactured. The molten irons were deoxidized using Al deoxidizer, and the morphology of the deoxidation products and the process of deoxidation were investigated by optical microscope, scanning electron microscope (SEM) and energy dispersive X-ray spectrometer(EDS). The reactions between Fe melt and Al deoxidizer formed deoxidation product, and those reaction may accelerates the reduction of oxide in Fe melt. According to the results of SEM analysis after deoxidizing treatment, it was found that deoxidation products had spherical cluster shape when 1% Al was added and dendritic shape with $2{\sim}3%$ A1 addition. The deoxidation products were globular, dendritic, polygonal(square) and cluster shape.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.331-336
• /
• 1999

The optical sensors of Electro-Optical Camera (EOC) and Ocean Scanning Multi-spectral Imager (OSMI) aboard the Korea Multi-Purpose SATellite (KOMPSAT) will be placed in a sun synchronous orbit in 1999. The EOC and OSMI sensors are expected to produce the land mapping imagery of Korean territory and the ocean color imagery of world oceans, respectively. Utilization of the EOC and OSMI data would encompass the various fields of science and technology such as land mapping, land use and development, flood monitoring, biological oceanography, fishery, and environmental monitoring. Readiness of data support for user community is thus essential to the success of the KOMPSAT program. As part of testing such readiness prior to the KOMPSAT launch, we have performed the preliminary acceptance test for the KOMPSAT data processing system using the simulated EOC and OSMI data sets. The purpose of this paper is to demonstrate the readiness of the KOMPSAT data processing system, and to help data users understand how the KOMPSAT EOC and OSMI data are processed and archived. Test results demonstrate that all requirements described in the data processing specification have been met, and that the image integrity is maintained for all products. It is however noted that since the product accuracy is limited by the simulated sensor data, any quantitative assessment of image products can not be made until actual KOMPSAT images will be acquired.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.108-113
• /
• 2001

Recently, the mechanical structures applied to many industrial products, especially in electronic products, appear to be miniaturized and complicated. This trend makes it difficult to analyze the stress distribution of those mechanical structures and generates new challenges for precise measurement of strain. Therefore, generally most of those cases largely depend on the finite element analysis. But the development of optical metrology which has the capability of non-contact, full-field and precise measurement makes it possible to solve these measuring problems. Among the optical measurement techniques, the electronic speckle pattern interferometry (ESPI) has been developed and considered as one of the most useful tools for measuring displacement and deformation. But the shortage of recognition and difficulties of measurement have limited its industrial applications in spite of its excellent capabilities. Therefore in this study, in order to enhance the industrial application of ESPI, the measurement of in-plane displacement of mechanical structure with ESPI, which is applied to washing machine and cannot be measured by strain gauges, was performed. And the verification of validity of FEA results was also done.