• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.119-126
• /
• 1995

This paper presents a non-contact measuring system using one point measuring method to measure surface profiles of dies and clay models for practical use in the field of production engineering. The system has a laser beam probe similar to a measuring probe in a contact measuring system and CCD linear sensor used to detect 300mm measurement range, displacement of measured surfaces, from an origin. There is no mechanical interference between this measuring system and a measured surface in this system. In this measuring system, it was needed 500-600ms including data processing time to measure one point. The experiments showed that the standard deviation was 800 .mu.m and the reproducibility was also 100-210 .mu. m.

• 센서학회지
• /
• 제10권4호
• /
• pp.214-221
• /
• 2001

비대칭 도파로 마흐젠더(Mach-Zehnder)형 $Ti:LiMbO_3$ 광변조기를 이용하여 아주 낮은 저주파대(ELF:Extremely Low Frequency)의 전계계측을 위한 센서개발을 시도하였다. $Ti:LiMbO_3$ 광변조기를 이용하는 전계센서의 감도는 광변조기의 전극구조에 따라 크게 달라지는 것을 알 수 있었다. 이의 확인을 위한 실험적 연구로서 플레이트(plate)형 프로브안테나를 부착한 광변조기를 제작하여 저주파 전계강도를 측정하였다. 전계강도의 측정은 주파수범위 60 Hz 에서 100 kHz 까지, 전계강도 0.1 V/cm 에서 60 V/cm 까지의 범위를 측정하였다. $10\;mm{\times}10\;mm$ 프로브안테나의 경우, 60 Hz, 0.1 V/cm의 피측정전계에서 $10^{-2}\;mV$의 감도를 얻을 수 있었다. 저주파 전계강도를 측정하기 위해서는 넓은 유효면적을 갖는 플레이트형 프로브안테나가 일반적인 다이폴 안테나보다 유용하다는 것을 확인하였다. 피측정 전자계의 주파수 범위에 따라 안테나의 유효면적을 적당히 조절한다면 더 좋은 센서의 감도를 얻을 수도 있다.

• 한국광학회지
• /
• 제19권2호
• /
• pp.103-107
• /
• 2008

기존 OCT 시스템의 Michelson 간섭계와 다르게 간섭신호가 프로브 끝단에서 유도되어 기준신호와 샘플신호가 동일한 경로를 통해 진행하는 공통경로 OCT 시스템을 제작하였다. 최적의 기준신호가 생성되도록 하기 위해 부분반사 프로브(Probe)의 굴절률을 최적화하였고 생체 샘플의 이미지 획득이 가능하도록 프로브의 끝단에서 초점이 맺히도록 볼록 렌즈형 프로브를 제작하였다. 이를 통해서 실제 샘플의 2차원 이미지의 획득이 가능하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.302-303
• /
• 2005

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.148-149
• /
• 2001

• ETRI Journal
• /
• 제26권3호
• /
• pp.189-194
• /
• 2004

We demonstrate a high-speed recording based on field-induced manipulation in combination with an optical reading of recorded bits on Au cluster films using the atomic force microscope (AFM) and the near-field scanning optical microscope (NSOM). We reproduced 50 nm-sized mounds by applying short electrical pulses to conducting tips in a non-contact mode as a writing process. The recorded marks were then optically read using bent fiber probes in a transmission mode. A strong enhancement of light transmission is attributed to the local surface plasmon excitation on the protruded dots.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1278-1280
• /
• 1995

A probe type fiber-optic sensing techique for electric current measurement is applied in this paper. The technique is based on the Faraday effect which meaning is that polarization state of light is rotated by magnetic field. In experiment, test wire is located at inside and outside of the probe to be measured. The experimental results prove not only linear property, but also polarization rotation property according to the distance from outside of probe.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.47-52
• /
• 2005

A lot of information storage devices have been introduced and developed for recently years. The trends of those devices are high capacity, compact size, low power consumption, reliability, and removability for data interchange with other device. As a satisfaction of these trends, near-field technique is in the spotlight as the next generation device. In order for a near-field recording to be successfully implemented in the storage device, a slider and suspension is introduced as actuating mechanism. The optical slider is designed considering near-filed optics. Suspension is not only supports slider performance, and tracking servo capacity but also meets the optical characteristics such as tilt aberration, and guarantee to satisfy shock performances for the mobility fir the actuator. In this study, the optical slider and the suspension for near-field probe array are designed and analyzed considering dynamic performance of head-gimbal assembly and shock simulation..

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.317-320
• /
• 2013

We studied the polarization state in an apertureless scanning near-field microscopy (a-SNOM) operating in reflection mode by using three-dimensional Finite-difference Time-domain (FDTD) method. As a result, the electric field around tip apex in the near-field region enhanced four times stronger than the incident light for ppolarization when the tip-sample separation was 10 nm. We find that the p- and s-polarization state is maintained for the scattered light when the probe is perpendicular to the sample. When the probe is not perpendicular to the sample, the polarization state of scattered light will rotate an angle that equals to the inclination angle of probe with p-polarization illumination. On the other hand, the polarization state will not rotate with s-polarization illumination.

• 센서학회지
• /
• 제13권5호
• /
• pp.335-341
• /
• 2004

A light collecting probe named Multi-colored Integrated Receiving Optics (MICRO) is experimentally examined to verify its performance. For these purposes, the time-series signals of MICRO probe is compared with those of electrostatic probe and light-guided probe by monitoring, for example, such as OH radical chemiluminescence, CH radical band and droplet Mie scattering. In addition, the experiment was conducted by using laminar premixed Bunsen flame, turbulent premixed Bunsen flame and premixed spray flame, respectively. It was confirmed that the performance of MICRO probe was very useful and convenient to obtain the chemiluminescence signals from local regions in turbulent premixed Bunsen flame and premixed spray flame.