• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.687-690
• /
• 2006

Influence of polarizer with different haze value on the optical properties of TFT-LCD TV has been investigated. According to the results, a optimum optical performance can be achieved by using the polarizer with proper haze value.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.969-971
• /
• 2002

In this paper, we study the performances of optical system design using the 1 panel LCD without color filter for projection color television. We analyze the optical efficiency compare this system with 1 panel LCD system using the color filter, and work out a constraint condition of 1 panel LCD without color filter for optical design. We design a high brightness 1 panel optical system using a complex reflection mirror and suggest a method of the optical system design.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.67-71
• /
• 2012

The optical properties of PDP, such as the transmittance and reflectance, were analyzed with 3D optical code. Three different ITO-less structures in the front panel are examined. In the assembled panel study, the test 1 structure shows 16.6% and 10.2% higher reflectance than the structures of tests 2 and 3, respectively. In order to check the validation of the simulation result, three 7.5-inch test panels having the same geometry and property are fabricated as simulation models. The calculated reflective properties are compared to the measured data from real panels. The relative difference extracted from the simulation and measurement methods is less than 4.9% and are well matched.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.158-159
• /
• 2002

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.25-32
• /
• 2020

본 논문에서는 OLED 패널에 영상을 디스플레이 하면서 패널 불량 검사 및 광학 측정을 이용하여 색 좌표 및 휘도를 보상할 수 있는 OLED 패널 테스트를 위한 영상 발생기를 제안한다. 제안된 영상 발생기는 영상 발생 과정과 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정 등의 2가지 과정으로 구성된다. 영상 발생 과정은 패널을 구동하기 위한 패널의 정보를 셋팅하고, 패널 정보에 맞게 영상 발생기의 출력 셋팅을 조절하여 영상을 출력한다. 영상의 출력 형태는 디지털 RGB 방식으로 구성된다. 영상발생기 내부의 패턴 발생 알고리즘은 패널의 해상도에 맞게 동기 신호를 기준으로 24비트 데이터 라인에 색데이터를 전송하는 방식으로 칼라 및 그레이 계열 영상 데이터를 출력한다. 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정은 영상 발생기에서 영상을 OLED 패널에 출력하고, 광학 모듈로 측정한 색 좌표 및 휘도 데이터를 기준 데이터보다 차이나는 부분을 보상한다. 본 논문에서 제안된 OLED 패널 테스트를 위한 영상 발생기의 정확성을 평가하기 위해서 Xilinx 사의 Spartan 6 계열의 XC6SLX25-FG484 FPGA를 사용하였고 설계 툴은 ISE 14.5를 사용하였다. 영상 발생 과정의 출력은 오실로스코프를 이용한 디지털 RGB 출력에 대하여 목표로 한 설정 값과 시뮬레이션 결과 값이 일치함을 확인 할 수 있었다. 광학 측정을 이용한 색 좌표 및 휘도를 보상한 데이터는 패널 제조업체에서 제시한 오차율 이내의 정확도를 나타내었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.175-178
• /
• 2011

An optical fiber-based beam width measurement technique is presented. The proposed system can be applied to the optical fiber industry in applications such as lensed fiber, optical fiber based laser beam source, and fiber optic sensor. The measurement system is composed of optical fiber, which is used as a transceiver, and a single grating panel which consists of a multi-reflection area with an even non-reflection area. The grating panel is used to vary the reflected light. When the widths of the reflection area and non-reflection area are larger than the optical beam width, the reflected light is varied at the interface between the reflection area and the non-reflection area by the movement of the grating panel. Experiments were conducted in order to verify the feasibility of the proposed technique. Multi-mode fiber combined with a collimator was selected as an emitter and a receiver, and the beam width measurement system was contrived. Subsequently, the proposed method and the system were verified by comparing the experimental results with the results of the conventional charge-coupled device technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1429-1431
• /
• 2006

We developed new anti-glare(AG) layer which has improved image quality and solved mechanical problems. Conventional silica-type AG has some restrictions related to sparkling, causing mechanical defects. The new anti-glare layer is designed with adjusted optical factors and polymer type. Therefore new anti-glare layer meets two main characteristics at once using unmatched optical property between scattering in material and surrounding.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.148-149
• /
• 2006

TFT-LCD BLU has been remarkably developed for a recent few years as TFT-LCD market is increased. Recently new BLU technologies and components are developed as more aggressively than before since TFT-LCD panel requires higher quality and resolution. Especially Samsung Electronics and LG Philips LCD of Korea are major LCD panel makers and the major optical materials of LCD BLU and panel for Samsung Electronics have been supplied by Samsung Cheil Industries. In this presentation introduction to main components of LCD BLU will be investigated details. Also characteristics and applications of optical polymers such as PMMA, PET etc for LCD display will be included and finally recent trends in optical materials for LCD BLU will be shown briefly.

• 광학과기술
• /
• 제8권1호
• /
• pp.5-12
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.115-116
• /
• 2006