• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.107-113
• /
• 2011

LSPR(Localized Surface Plasmon Resonance) sensor measures the refractive index change on the sensor surface. The detection of biological reaction with the unknown refractive index needs to be converted into the signal sensitivity for the refractive index change for comparison with other measurements. To find the signal sensitivity, the three steps of signal processing are proposed, which are signal modeling, signal calibration and signal normalization of LSPR sensor. The detected signal of biotin-streptavidin interaction has been converted into unit of [RU](Resonance Unit) using the proposed method. The converted signal directly can be compared with the other sensors including commercialized one.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.823-828
• /
• 2011

We have systematically designed and experimentally demonstrated the opto-electrical predistortion optical transmitter using microwave circuit modelling for reducing the nonlinearity of the distributed-feedback laser diode (DFD-LD). The DFB-LD is analyzed using microwave circuits model based on rate equations. Through the system-level simulation for predistortion method, the optimized characteristics of the RF components in the system are confirmed. The simulated and experimental results show the reduced distortion products. These results are analyzed as the evaluation parameters for the miniaturization and optimization of the opto-electrical predistortion method in radio-over-fiber systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1534-1541
• /
• 2000

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540-1560 nm when a polarization controller and an intra-cavit polarizer with 1.5 mm air gap are adjusted. The characteristics of wavelength shift in the laser output are analyzed by introducing an optical path modeling and the concept of a birefringence loss.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.158-159
• /
• 2000

본 논문에서는 BK7 유리 기판에 Ag$^{+}$-$Na^{+}$ 이온교환법을 이용하여 1.31/1.55$mu extrm{m}$ 방향성 광결합기형 역다중화기를 제작하여 특성을 평가하였다. BK7에 이온교환법을 이용하여 도파로를 제작할 경우 0.2dB/cm 이하의 전파손실을 유지할 수 있으며 또한 도파로의 굴절율 분포가 단일모드 광섬유와 매우 유사하여 광섬유와 광소자 사이의 접합면에서 발생하는 접합손실을 줄일 수 있다 또한 BK7을 이용하면 도파로를 제작하였을 때 복굴절 현상이나 편광 의존성이 적어서 수동 소자 제작에 유용하다는 장점이 있다$^{(1 3)}$ . (중략)

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.117-122
• /
• 1998

We modeled the dynamic switching behavior of a bistable twisted-nematic liquid crystal cell by employing the Berreman's backflow model. Although viscosity paramenters of the liquid crystal material are not known, numerically calculated optical switching characteristics shows good agreement with experimental results. With this model we also have shown that bistable switching can be observed in a $180^{\circ}$ twisted cell only when two alignment layers are rubbed in the opposite direction.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.156-162
• /
• 2004

The spectroscopic model is proposed to analyze the gain bandwidth of a fiber Raman amplifier (FRA) with a multiple wavelength pumping scheme based on Raman gain theory. The oscillatory lineshape, which is the analytic function to analyze Raman gain spectra, allows us to estimate the gain bandwidth of the FRA. Based on the proposed theoretical modeling, we design and analyze the characteristics of the FRA using the combined multiwavelength pumping sources. We achieved the extended gain bandwidth of the FRA over 80 nm with the small gain ripple less than 0.5 dB. Threshold pumping power and effective noise figure for the FRA can be also analyzed by using the proposed model, which is also applicable for versatile fibers with other doping materials. The proposed analysis method can be useful for the design of FRA with the multiwavelength pumping scheme.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2003

This paper presents a high-precision magnetically levitated (maglev) stage to meet demanding motion specifications in the next-generation precision manufacturing and nanotechnology. Characterization of dynamic behaviors of such a motion stage is a crucial task. In this paper, we address the issues related to the stochastic modeling of the stage including transfer function identification, and noise/disturbance analysis and prediction. Provided are test results on precision dynamics, such as fine settling, effect of optical table oscillation, and position ripple. To deal with the dynamic coupling in the platen, we designed and implemented a multivariable linear quadratic regulator, and performed time-optimal control. We demonstrated how the performance of the current maglev stage can be improved with these analyses and experimental results. The maglev stage operates with positioning noise of 5 nm rms in $\chi$ and y, acceleration capabilities in excess of 2g(20 $m/s^2$), and closed-loop crossover frequency of 100 Hz.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.80-86
• /
• 1999

The theoretical modeling of free carrier absorption in quantum wells grown on anisotropic materials is presented for the first time. The intersubband and intrasubband free carrier absorption are distinguished and the contribution of each subband to them is calculated separately. The calculated results are compared with the experimental values of $\delta$-doped Si quantum wells in literature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1372-1383
• /
• 1998

In this paper, modeling for DC and AC characteristics analysis of DFB-LD was performed considering effects of .lambda./4-shifted gratingandspatial hole burning within a laser diode cavity. From the simulation for DC characteristics, Light-Current curve, optical power distribution and carrier density distribution within the cavity can be obtained. The simulation for AC characteristics porovides IM response and the amplitude and phase and the amplitude and phase response of FM with excellent accuracy.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.4
• /
• pp.149-152
• /
• 2002

We performed the modeling of the dielectric functions of C $d_{0.77}$M $g_{0.23}$Te by using parametric semiconductor model. Parametric model describes the analytic dielectric function as the summation of several energy-bounded Gaussian-broadened polynomials and provides a reasonably well parameterized function which can accurately reproduce the optical constants of semiconductor materials. We obtained the values of fitting parameters of the Mg composition 0.23 in the parametric model. From these parameters we could remove interference oscillations to obtain the dielectric function of C $d_{0.77}$M $g_{0.23}$Te alloy film for full 0.5-6.0 eV energy range.y range.