• 제목/요약/키워드: Optical Gap Sensor

검색결과 55건 처리시간 0.079초

The Growth Characteristics of ${\beta}\;-FeSi_2$ as IR-sensor Device for Detecting Pollution Material : The Usage of the Ferrocene-Plasma

  • Kim, Kyung-Soo;Jung, II-Hyun
    • 환경위생공학
    • /
    • 제15권2호
    • /
    • pp.102-111
    • /
    • 2000
  • As IR-sensor for detecting pollution material, the iron silicide has a fit band gap, high physicochemical stability at high temperature and good acid resistance. The growing film was formed with the Fe-Si bond and the organic compound because plasma resolved the injected precursors into various active species. In the Raman scattering spectrum, the Fe-Si vibration mode showed at 250 {TEX}$cm^{-1}${/TEX}. The FT-IR peak indicated that the various organic compounds were deposited on the films. The iron silicide was epitaxially grown to β-phase by the high energy of plasma. The lattice structure of films had [220]/[202] and [115]. The thickness of the films increased with the flow rate of silane. But rf-power increased with decreasing the thickness. The optical gap energy and the band gap were shown about 3.8 eV and 1.182∼1.194 eV. The band gap linearly increased and the formula was below: {TEX}$E_g^{dir}${/TEX}= 8.611×{TEX}$10^{-3}N_{D}${/TEX}+1.1775

  • PDF

공간 선택적 브릴루앙 산란을 이용한 분포형 광섬유 센서의 시뮬레이션 (Simulation of Distributed Optical Fiber Sensors Using Spatially-Selective Brillouin Scattering)

  • 윤승철;서민성;박희갑
    • 한국광학회지
    • /
    • 제17권2호
    • /
    • pp.127-135
    • /
    • 2006
  • 광주파수 변조된 펌프와 프로브 빛의 광섬유 내 중첩을 시간 영역에서 직접 다루는 방법으로 공간 선택적 브릴루앙 산란 방식의 분포형 광섬유 센서를 시뮬레이션 하였다. 광섬유 내 브릴루앙 이득 분포의 시간/공간적 변화를 구하였고, 이종 광섬유의 접속과 온도 분포가 존재하는 경우에 대해 시뮬레이션 하여 분포형 센서로서 합당한 결과를 얻었다. 변조 파형으로서 정현파 대신에 삼각파를 이용한 경우에 정현파에 비해 공간 분해능 면에서 유리한 것으로 나타났다.

광강도형 광섬유 진동센서를 이용한 진동감지 및 충격위치 측정 (Vibration Sensing and Impact Location Measurement Using Intensity-Based Optical Fiber Vibration Sensor)

  • 양유창;황운봉;박현철;한경섭
    • Composites Research
    • /
    • 제13권5호
    • /
    • pp.1-9
    • /
    • 2000
  • 광강도형 광섬유 진동센서를 이용한 구조물의 진동감지 및 판에서의 충격위치 검출에 관한 연구가 수행되었다. 광섬유 진동센서는 유리 모세관의 내부에 광섬유의 클래딩 부분이 서로 마주보게 하여 제작되며 그 중 한 쪽은 외팔보 형태이다. 진동이 센서에 가해지면 센서 내부의 외팔보가 진동하게 되고 그에 따라 맞은편 광섬유로 전해지는 빛의 강도가 변화하게 된다. 진동감지 실험을 위해 광섬유 진동센서를 복합재료 보의 표면에 부착하고 자유 진동 및 강제 진동에 대한 신호를 취득하였다. 충격 위치 검출에 관한 실험은 아크릴 판에 대하여 알려진 위치에 네 개의 센서를 표면에 부착하고 진동의 도달 시간을 FFT를 이용하여 측정하였다. 충격위치는 이러한 시간차이를 이용하여 계산되어졌다. 광섬유 진동센서는 상용센서인 갭센서와 동일하게 구조물의 진동을 감지하였으며 판에서의 충격위치를 비교적 정확히 측정하였다.

  • PDF

Embodiment of all-optical switching phenomena on a GaAs waveguide

  • 이상재
    • 센서학회지
    • /
    • 제5권5호
    • /
    • pp.85-95
    • /
    • 1996
  • Based on the transmission of coupled gap solitons in nonlinear periodic media, we present an all-optical switching scheme which has a novel architecture and principle. The proposed switch with an extremely small switching element can be realized on a semiconductor waveguide. We here investigate the switching performance with a GaAs waveguide in order to give criteria for the experimental realization of the all-optical switching phenomena. We also suggest a variation of an index-matching scheme to solve the technical problem such as the input-energy coupling into a periodic waveguide.

  • PDF

SOI 슬롯 광 도파로 기반 단일 및 삽입-분기 채널 링-공진형 바이오·케미컬 집적광학 센서의 제원에 대한 감도 해석 (Sensitivity Analysis for Specifications of Silicon-on-Insulator (SOI) Slot Optical Waveguide-based Single and Add-drop Channel Ring-resonant Biochemical Integrated Optical Sensors)

  • 장재식;정홍식
    • 센서학회지
    • /
    • 제31권2호
    • /
    • pp.107-114
    • /
    • 2022
  • The effects of ring radius and coupling spacing on the free spectral range (FSR), full width at half maximum (FWHM), quality factor, and sensitivity of single-channel and add-drop channel slot ring resonators were systematically investigated using FIMMPROP and PICWAVE numerical software. The single-channel ring resonator exhibited better characteristics, namely, a wider FSR and narrower FWHM compared with the add-drop structure; thus, it was evaluated to be more suitable for biochemical sensors. The FSR, FWHM, quality factor, and sensitivity for a single channel ring resonator with a radius of 59.4 ㎛ and coupling gap of 0.5 ㎛ were 2.4 nm, 0.087 nm, 17677, and 550 [nm/RIU], respectively.

공간 선택적 브릴루앙 산란을 이용한 분포형 광섬유 센서의 실험 (Experiment of Distributed Optical Fiber Sensor Using Spatially-Selective Brillouin Scattering)

  • 서민성;윤승철;현진영;박희갑
    • 한국광학회지
    • /
    • 제17권3호
    • /
    • pp.223-230
    • /
    • 2006
  • 직접 광주파수 변조된 레이저 다이오드를 광원으로 이용하여 공간 선택적 브릴루앙 산란 방식으로 분포형 광섬유 센서를 구성하여 실험하였다. 광주파수가 정현파로 변조된 펌프와 프로브 빛이 광섬유 내로 서로 반대 방향으로 진행하며 중첩되도록 함으로써 광섬유 내 특정 지점에서만 유도 브릴루앙 산란이 발생하도록 하였으며, 변조 주파수를 변화시켜 브릴루앙 이득 피크의 위치를 조절할 수 있었다. 브릴루앙 천이 주파수가 서로 다른 광섬유를 접속한 경우와 광섬유 길이를 따라 온도 분포가 존재하는 경우에 대해 각각 브릴루앙 천이 주파수의 분포를 측정하였다. 브릴루앙 천이 주파수의 온도 변화율은 $1.33MHz/^{\circ}C$로 측정되었다.

금속-유기 구조체를 이용한 포토닉 크리스탈 기반의 효율적인 습도 컬러 센서 (Efficient Humidity Color Sensor Based on a Photonic Crystal with a Metal-Organic Framework)

  • 김준용;이성학;도윤선
    • 한국광학회지
    • /
    • 제29권6호
    • /
    • pp.268-274
    • /
    • 2018
  • 본 연구에서는 1차원 포토닉 크리스탈과 금속-유기 구조체 (MOF) 물질인 Hong Kong University of Science and Technology(HKUST-1)을 이용한 수분 감지 컬러 센서를 제안한다. 1차원 포토닉 크리스탈은 주기적인 굴절률 변화에 의해 포토닉 밴드갭이 존재하고, 특정한 파장 대역의 광 성분을 차단 및 반사한다. HKUST-1의 굴절률은 건조한 환경과 습한 환경에서 그 값이 서로 다르다. 여기서 우리는 포토닉 밴드갭의 유무를 활용하여 FDTD 시뮬레이션으로 센서를 설계하였다. 광학 해석 결과, 투과된 광의 색 변환보다 반사된 광의 색 변환이 우수하여 반사된 광을 이용하였다. 그리고 포토닉 밴드갭의 중심 파장이 550 nm인 경우, 건조한 환경 대비 습한 환경의 최대 피크 값이 약 9.5배로 증가했으며, 무채색에서 녹색으로 색 변환이 가능하여 센서로의 특성이 우수하였다. 본 연구 결과는 MOF 물질의 수분 감지 컬러 센서로의 활용을 제시하였으며, MOF 물질의 나노 구조 설계로 산업 디바이스로의 활용성도 확대할 것이다.

Er-doped Superfluorescent Fiber Source with Thermally Stable Mean Wavelength

  • Park, Hee-Gap;Yun, Seung-Chul;Jin, Young-Jun
    • Journal of the Optical Society of Korea
    • /
    • 제13권2호
    • /
    • pp.240-244
    • /
    • 2009
  • An Er-doped superfluorescent fiber source is designed and constructed with the double-pass forward configuration, which aims at high stability of its mean wavelength against temperature variation. As a result, thermal stability of mean wavelength better than 1 ppm is obtained against the temperature variation of ${\pm}5^{\circ}C$ around the optimum operating temperature. The optimum operating temperature can be tuned with the Er-doped fiber length and the pump power.

기상모델자료와 기계학습을 이용한 GK-2A/AMI Hourly AOD 산출물의 결측화소 복원 (Spatial Gap-filling of GK-2A/AMI Hourly AOD Products Using Meteorological Data and Machine Learning)

  • 윤유정;강종구;김근아;박강현;최소연;이양원
    • 대한원격탐사학회지
    • /
    • 제38권5_3호
    • /
    • pp.953-966
    • /
    • 2022
  • 에어로솔(aerosol)은 대기 질을 악화시키는 등 인체 건강에 악영향을 끼치므로 에어로솔의 분포 및 특성에 대한 정량적인 관측이 필수적이다. 최근 전 지구 규모에서의 주기적이고 정량적인 정보 획득 수단으로 위성관측 Aerosol Optical Depth (AOD) 영상이 다양한 연구에 활용되지만 광학센서 기반의 위성 AOD 영상은 구름 등의 조건을 가진 일부 지역에서 결측을 가진다. 이에 본 연구는 위성자료의 결측복원을 위하여 격자형 기상자료와 지리적 요소를 입력변수로 하여 Random Forest (RF) 기반 gap-filling 모델을 생성한 이후, gap-free GK-2A/AMI AOD hourly 영상을 산출하였다. 모델의 정확도는 -0.002의 Mean Bias Error (MBE), 0.145의 Root Mean Square Error (RMSE)로, 원자료의 목표 정확도보다 높으며 상관계수 0.714로 복원 대상이 대기변수인 점을 감안하면 상관계수 측면에서도 충분한 설명력을 갖춘 모델이다. 정지궤도 위성의 높은 시간 해상도는 일변화 관측에 적합하며 대기보정을 위한 입력, 지상 미세먼지 농도 추정, 소규모 화재 또는 오염원 분석 등 타 연구를 위한 자료 활용 측면에서 중요하다.

최적 연속전해드레싱 시스템의 개발과 제어특성 (The Trial Construction of Optimum In-Process Electrolytic Dressing System and the Control Characteristics)

  • 김정두;이은상
    • 대한기계학회논문집
    • /
    • 제19권3호
    • /
    • pp.680-687
    • /
    • 1995
  • In recent years, grinding techniques for precision machining of brittle materials used in electric, optical and magnetic parts have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of brittle materials. But the present dressing system cannot have control of optimum dressing of the superabrasive wheel. This study has proposed a new optimum in-process electrolytic dressing system. This system can carry out optimum in-process dressing of superabrasive wheel, and give very effective control according to gap increase.