통합 검색 | Korea Science

김동묵;강신일;임윤철
- 한국정밀공학회지
- /
- 제18권4호
- /
- pp.46-54
- /
- 2001
Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.
PDF

Piao, Jing-Ai;Li, Gang;Piao, Mei-Lan;Kim, Nam
- Journal of the Optical Society of Korea
- /
- 제17권3호
- /
- pp.242-248
- /
- 2013
Full color holographic optical element fabrication using a photopolymer is proposed for a waveguide-type head mounted display. The fabricated full color holographic optical elements can be attached to the waveguide to replace the conventional couple-in and couple-out optics in the head mounted display. To implement the system, this study analyzed the optical characteristics of the photopolymer using three lasers (red, green and blue). Considering the color uniformity, a new laminated structure for a full color holographic optical element was also designed. The proposed system was confirmed experimentally.
https://doi.org/10.3807/JOSK.2013.17.3.242 인용 PDF KSCI

김준형;양회영;이현용
- 한국전기전자재료학회:학술대회논문집
- /
- 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
- /
- pp.390-390
- /
- 2008
In this paper, we have designed and fabricated optical waveguides based on the Mach-Zehnder Interferometer (MZI) for application to sensor. The evanecent-wave sensor based on the MZI principle has sufficiently high sensitivity to measure the change of the refractive index on surface of a waveguide. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of MZI optical waveguides was performed by a conventional Planar Lightwave Circuit (PLC) fabrication process. The fabricated MZI optical waveguide device was measured. According to the measurement result, the insertion loss of MZI optical waveguide device was below 3.5 dB and the polarization dependent loss (PDL) was within 0.1dB. In addition, we analyzed optical properties of MZI sensor according to the refractive index change of the sensor arm.
PDF

이재하;박성령;양승한;이영문
- 한국정밀공학회지
- /
- 제21권5호
- /
- pp.38-45
- /
- 2004
As optical communication is being substituted for telecommunication, the demand of a large variety of fiber optic components is increasing. V-groove substrates, one of the module components, are used to connect optical fibers to optical planar circuits and to arrange fibers. Their applications are multi-channel optical connectors and optical waveguide fiber coupling, etc. Because these substrates are a critical part of the splitter in a multiplexer and a multi fiber connector, precise and reliable fabrication process is required. For precisely aligning core pitch between fibers, machined core pitch tolerance should be within sub-microns. Therefore, these are generally produced by state-of-the-art micro-fabrication like MEMS. However, most of the process equipment is very expensive. It is also difficult to change the process line for custom designs to meet specific requirements using various materials. For various design specifications such as different values of the V angle and low-priced process, the fabrication method should be flexible and low cost. To achieve this goal, we have suggested a miniaturized machine tool with high accuracy positioning system. Through this study, it is shown that this cutting process can be applied to produce V-groove subtracts. We also show the possibility of using a miniaturized machining system for producing small parts.
PDF KSCI